component
OPA336NJ
Public Made by Adomby adom
Texas Instruments Precision Op Amps, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownOPA336NJ
Texas Instruments · Precision Op Amps · SOT-23-5
OPA336NJ from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out | output | Op amp output, rail-to-rail swinging to within 3mV of the supplies with a 100kΩ load, with short-circuit current of ±5mA. |
| 2 | V- | power_in | Negative supply (ground in single-supply use); the input common-mode range extends to this rail (VCM from -0.2V). |
| 3 | +In | input | Non-inverting input, diode-clamped to the supply rails (limit current to 10mA if the signal swings more than 0.3V beyond them), with common-mode range of -0.2V to (V+) -1V. |
| 4 | -In | input | Inverting input, diode-clamped to the supply rails (limit current to 10mA if the signal swings more than 0.3V beyond them), with common-mode range of -0.2V to (V+) -1V. |
| 5 | V+ | power_in | Positive supply, specified from 2.3V to 5.5V (minimum operating 2.1V, absolute maximum 7.5V supply voltage). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
OPA336NJ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
opa336nj-etched.step/opa336nj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa336nj.step/opa336nj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
c9413cc89f5cf311, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).