main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers opa336na-250: viewers rendered from the public page · Ray
opa336na-250-etched.glb Publish 0.1.0 · Ray
opa336na-250-etched.step opa336na-250: factory component page (tier=mfr) · Ray
opa336na-250-hero.glb opa336na-250: hero GLB from the etched model (keeps the MPN mark) · Ray
opa336na-250-hero.overlay.json Publish 0.1.0 · Ray
opa336na-250.glb Publish 0.1.0 · Ray
opa336na-250.kicad_mod Publish 0.1.0 · Ray
opa336na-250.kicad_sym Publish 0.1.0 · Ray
opa336na-250.lbr Publish 0.1.0 · Ray
opa336na-250.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

OPA336NA

Texas Instruments · Precision Op Amps · SOT-23-5

OPA336NA from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out output Output swings rail-to-rail, within 3mV of the supplies with a 100kΩ load, and short-circuit current is ±5mA typical.
2 V- power_in Negative power supply; the input common-mode range extends down to (V-) - 0.2V, which makes it suitable for single-supply use.
3 +In input Non-inverting input; normal operation requires the common-mode voltage to stay between (V-) - 0.2V and (V+) - 1V, and input current must be limited to 10mA when overdriven beyond the supply rails.
4 -In input Inverting input; normal operation requires the common-mode voltage to stay between (V-) - 0.2V and (V+) - 1V, and input current must be limited to 10mA when overdriven beyond the supply rails.
5 V+ power_in Positive power supply; specified for 2.3V to 5.5V operation, with minimum operating voltage of 2.1V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -125 60 125 µV 3
Power Supply Rejection Ratio (vs Power Supply) PSRR 25 100 µV/V VS = 2.3V to 5.5V 3
Power Supply Rejection Ratio (Over Temperature) PSRR 130 µV/V Over temperature, VS = 2.3V to 5.5V 3
Input Bias Current (Over Temperature) IB -60 60 pA Over temperature 3
Input Bias Current IB -10 1 10 pA 3
Input Offset Current IOS -10 1 10 pA 3
Common-Mode Voltage Range VCM -0.2 V Upper limit printed as (V+), 1; not numeric, left null 3
Common-Mode Rejection Ratio CMRR 80 90 dB -0.2V < VCM < (V+) -1V 3
Common-Mode Rejection Ratio (Over Temperature) CMRR 76 dB Over temperature, -0.2V < VCM < (V+) -1V 3
Open-Loop Voltage Gain AOL 100 115 dB RL = 25kΩ, 100mV < VO < (V+), 100mV 3
Open-Loop Voltage Gain (Over Temperature) AOL 100 dB Over temperature, RL = 25kΩ, 100mV < VO < (V+), 100mV 3
Open-Loop Voltage Gain AOL 90 106 dB RL = 5kΩ, 500mV < VO < (V+), 500mV 3
Open-Loop Voltage Gain (Over Temperature) AOL 90 dB Over temperature, RL = 5kΩ, 500mV < VO < (V+), 500mV 3
Voltage Output Swing from Rail VO 20 100 mV RL = 25kΩ, AOL ≥ 90dB 3
Voltage Output Swing from Rail (Over Temperature) VO 100 mV Over temperature, RL = 25kΩ, AOL ≥ 90dB 3
Voltage Output Swing from Rail VO 70 500 mV RL = 5kΩ, AOL ≥ 90dB 3
Voltage Output Swing from Rail (Over Temperature) VO 500 mV Over temperature, RL = 5kΩ, AOL ≥ 90dB 3
Quiescent Current (per amplifier) IQ 20 32 µA IO = 0 3
Quiescent Current (per amplifier, Over Temperature) IQ 36 µA Over temperature, IO = 0 3
Specified Voltage Range VS 2.3 5.5 V 3
Minimum Operating Voltage VS(min) 2.1 V 3
Specified Temperature Range TA -40 85 °C 3
Operating Temperature Range TA -55 125 °C 3
Storage Temperature Range TSTG -55 125 °C 3
Supply Voltage VS 7.5 V 2
Signal Input Terminals Current II 10 mA Input terminals, see note 2 (diode-clamped) 2
Operating Temperature TA -55 125 °C 2
Storage Temperature TSTG -55 125 °C 2
Junction Temperature TJ 150 °C 2
Lead Temperature (soldering) TLEAD 300 °C Soldering, 10s 2
ESD Human Body Model HBM 500 V HBM 2
ESD Machine Model MM 100 V MM 2
Input Offset Voltage vs Temperature dVOS/dT 1.5 µV/°C 3
Channel Separation, dc 0.1 µV/V 3
Input Voltage Noise 3 µVp-p f = 0.1 to 10Hz 3
Input Voltage Noise Density en 40 nV/√Hz f = 1kHz 3
Current Noise Density in 30 fA/√Hz f = 1kHz 3
Gain-Bandwidth Product GBW 100 kHz VS = 5V, G = 1 3
Slew Rate SR 0.03 V/µs VS = 5V, G = 1 3
Overload Recovery Time 100 µs VIN • G = VS 3
Voltage Output Swing from Rail VO 3 mV RL = 100kΩ, AOL ≥ 70dB 3
Short-Circuit Current ISC 5 mA 3
Thermal Resistance, junction-to-ambient (SOT-23-5 Surface-Mount) θJA 200 °C/W SOT-23-5 package 3

CAD (KiCad official)

  • Symbol: OPA336NA
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa336na-250-etched.step / opa336na-250-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa336na-250.step / opa336na-250.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 c9413cc89f5cf311, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF