main
Ray
Publish 0.1.0
5ebf5a4
OPA335AIDBVT
Texas Instruments · Precision Op Amps · SOT-23-5
OPA335AIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out | output | Amplifier output, which swings to within 15 mV typical (100 mV max over temperature) of the rails at RL = 10kΩ and can source or sink a short-circuit current of ±50 mA. |
| 2 | V- | power_in | Negative power supply rail; the total supply range is +2.7V to +5.5V and the input common-mode range extends down to (V-) - 0.1V. |
| 3 | +In | input | Non-inverting input whose common-mode voltage must stay within (V-) - 0.1V to (V+) - 1.5V for normal operation. |
| 4 | -In | input | Inverting input whose common-mode voltage must stay within (V-) - 0.1V to (V+) - 1.5V, and input currents above 10mA must be limited when signals exceed the supply rails by 0.5V or more. |
| 5 | V+ | power_in | Positive power supply rail; operating range is +2.7V to +5.5V with an absolute maximum supply of +7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | 2.7 | 5.5 | V | 3 | |||
| Input Offset Voltage | VOS | 1 | 5 | µV | VCM = VS/2 | 3 | |
| Offset Voltage Drift vs Temperature | dVOS/dT | -0.05 | 0.02 | 0.05 | µV/°C | 3 | |
| Power Supply Rejection Ratio | PSRR | -2 | 1 | 2 | µV/V | VS = +2.7V to +5.5V, VCM = 0, Over Temperature | 3 |
| Input Bias Current | IB | -200 | 70 | 200 | pA | VCM = VS/2 | 3 |
| Input Bias Current, Over Temperature | IB | 1 | nA | Over Temperature | 3 | ||
| Input Offset Current | IOS | -400 | 120 | 400 | pA | 3 | |
| Common-Mode Rejection Ratio | CMRR | 110 | 130 | dB | (V-), 0.1V < VCM < (V+), 1.5V, Over Temperature | 3 | |
| Open-Loop Voltage Gain | AOL | 110 | 130 | dB | 50mV < VO < (V+), 50mV, RL = 100kΩ, VCM = VS/2 | 3 | |
| Open-Loop Voltage Gain, Over Temperature | 110 | 130 | dB | Over Temperature; 100mV < VO < (V+), 100mV, RL = 10kΩ, VCM = VS/2 | 3 | ||
| Voltage Output Swing from Rail | 15 | 100 | mV | RL = 10kΩ, Over Temperature | 3 | ||
| Voltage Output Swing from Rail | 1 | 50 | mV | RL = 100kΩ, Over Temperature | 3 | ||
| Shutdown Logic Low Voltage | VL | 0 | 0.8 | V | 3 | ||
| Shutdown Logic High Voltage (amplifier active) | VH | 5.5 | V | 3 | |||
| Quiescent Current | IQ | 285 | 350 | µA | IO = 0 | 3 | |
| Quiescent Current, Over Temperature | IQ | 450 | µA | Over Temperature | 3 | ||
| Specified Temperature Range | -40 | 125 | °C | 3 | |||
| Supply Voltage (absolute maximum) | 7 | V | 2 | ||||
| Signal Input Terminals Voltage | -0.5 | V | 2 | ||||
| Signal Input Terminals Current | -10 | 10 | mA | 2 | |||
| Operating Temperature (absolute maximum) | -40 | 150 | °C | 2 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Junction Temperature (absolute maximum) | 150 | °C | 2 | ||||
| Lead Temperature | 300 | °C | soldering, 10s | 2 | |||
| Thermal Resistance, junction-to-ambient | θJA | 200 | °C/W | SOT23-5, SOT23-6 Surface-Mount | 3 |
CAD (KiCad official)
- Symbol:
OPA335AIDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa335aidbvt-etched.step/opa335aidbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa335aidbvt.step/opa335aidbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
b9c22c30083c914f, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA335AIDBVT
**Texas Instruments** · Precision Op Amps · SOT-23-5
OPA335AIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out | output | Amplifier output, which swings to within 15 mV typical (100 mV max over temperature) of the rails at RL = 10kΩ and can source or sink a short-circuit current of ±50 mA. |
| 2 | V- | power_in | Negative power supply rail; the total supply range is +2.7V to +5.5V and the input common-mode range extends down to (V-) - 0.1V. |
| 3 | +In | input | Non-inverting input whose common-mode voltage must stay within (V-) - 0.1V to (V+) - 1.5V for normal operation. |
| 4 | -In | input | Inverting input whose common-mode voltage must stay within (V-) - 0.1V to (V+) - 1.5V, and input currents above 10mA must be limited when signals exceed the supply rails by 0.5V or more. |
| 5 | V+ | power_in | Positive power supply rail; operating range is +2.7V to +5.5V with an absolute maximum supply of +7V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | | 2.7 | | 5.5 | V | | 3 |
| Input Offset Voltage | VOS | | 1 | 5 | µV | VCM = VS/2 | 3 |
| Offset Voltage Drift vs Temperature | dVOS/dT | -0.05 | 0.02 | 0.05 | µV/°C | | 3 |
| Power Supply Rejection Ratio | PSRR | -2 | 1 | 2 | µV/V | VS = +2.7V to +5.5V, VCM = 0, Over Temperature | 3 |
| Input Bias Current | IB | -200 | 70 | 200 | pA | VCM = VS/2 | 3 |
| Input Bias Current, Over Temperature | IB | | | 1 | nA | Over Temperature | 3 |
| Input Offset Current | IOS | -400 | 120 | 400 | pA | | 3 |
| Common-Mode Rejection Ratio | CMRR | 110 | 130 | | dB | (V-), 0.1V < VCM < (V+), 1.5V, Over Temperature | 3 |
| Open-Loop Voltage Gain | AOL | 110 | 130 | | dB | 50mV < VO < (V+), 50mV, RL = 100kΩ, VCM = VS/2 | 3 |
| Open-Loop Voltage Gain, Over Temperature | | 110 | 130 | | dB | Over Temperature; 100mV < VO < (V+), 100mV, RL = 10kΩ, VCM = VS/2 | 3 |
| Voltage Output Swing from Rail | | | 15 | 100 | mV | RL = 10kΩ, Over Temperature | 3 |
| Voltage Output Swing from Rail | | | 1 | 50 | mV | RL = 100kΩ, Over Temperature | 3 |
| Shutdown Logic Low Voltage | VL | 0 | | 0.8 | V | | 3 |
| Shutdown Logic High Voltage (amplifier active) | VH | | | 5.5 | V | | 3 |
| Quiescent Current | IQ | | 285 | 350 | µA | IO = 0 | 3 |
| Quiescent Current, Over Temperature | IQ | | | 450 | µA | Over Temperature | 3 |
| Specified Temperature Range | | -40 | | 125 | °C | | 3 |
| Supply Voltage (absolute maximum) | | | | 7 | V | | 2 |
| Signal Input Terminals Voltage | | -0.5 | | | V | | 2 |
| Signal Input Terminals Current | | -10 | | 10 | mA | | 2 |
| Operating Temperature (absolute maximum) | | -40 | | 150 | °C | | 2 |
| Storage Temperature | | -65 | | 150 | °C | | 2 |
| Junction Temperature (absolute maximum) | | | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | soldering, 10s | 2 |
| Thermal Resistance, junction-to-ambient | θJA | | 200 | | °C/W | SOT23-5, SOT23-6 Surface-Mount | 3 |
## CAD (KiCad official)
- Symbol: `OPA335AIDBVT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `opa335aidbvt-etched.step` / `opa335aidbvt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa335aidbvt.step` / `opa335aidbvt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa335.pdf) (38 pp, sha256 `b9c22c30083c914f`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa335aidbvt-datasheet.pdf)