component
OPA333AIDCKT
Public Made by Adomby adom
Texas Instruments Precision Op Amps, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownOPA333AIDCKT
Texas Instruments · Precision Op Amps · SC-70-5
OPA333AIDCKT from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Noninverting input terminal with common-mode voltage range from (V-) - 0.1 V to (V+) + 0.1 V and input bias current of ±70 pA at 25°C. |
| 2 | V- | power_in | Negative power supply terminal; ground reference for single-supply or negative rail for dual-supply operation with voltage range 1.8 V to 5.5 V. |
| 3 | -IN | input | Inverting input terminal with common-mode voltage range from (V-) - 0.1 V to (V+) + 0.1 V and input bias current of ±70 pA at 25°C. |
| 4 | OUT | output | Output terminal with rail-to-rail swing capability of 30 mV to 70 mV from supply rails and short-circuit current limited to ±5 mA continuous. |
| 5 | V+ | power_in | Positive power supply terminal operating from 1.8 V to 5.5 V single-supply or ±0.9 V to ±2.75 V dual-supply configuration. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
OPA333AIDCKT - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
opa333aidckt-etched.step/opa333aidckt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa333aidckt.step/opa333aidckt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
df60da7154848c57, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).