Generated by kicad-footprint-generator · KiCad file format 20260206
OPA330AIDCKT
Texas Instruments · Precision Op Amps · SC-70-5
OPA330AIDCKT from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive (noninverting) input whose common-mode range extends 0.1 V beyond each supply rail, from (V-) - 0.1 V to (V+) + 0.1 V. |
| 2 | V- | power_in | Negative (lowest) power supply; the device is specified for a total supply of 1.8 V to 5.5 V (±0.9 V to ±2.75 V). |
| 3 | -IN | input | Negative (inverting) input whose common-mode range extends 0.1 V beyond each supply rail; input signals more than 0.3 V beyond the rails should be current-limited to 10 mA or less. |
| 4 | OUT | output | Output that swings within 100 mV of the supplies under normal test conditions and tolerates a continuous short-circuit to ground (one amplifier per package). |
| 5 | V+ | power_in | Positive (highest) power supply; the absolute maximum supply voltage (V+) - (V-) is 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (V+)-(V-) | VS | 7 | V | 7 | |||
| Signal input terminals voltage (relative to V- / V+ rails) | VI | -0.3 | 0.3 | V | 7 | ||
| Signal input terminals current | II | -10 | 10 | mA | 7 | ||
| Operating range, ambient temperature | TA | -40 | 150 | °C | 7 | ||
| Junction temperature | TJ | 150 | °C | 7 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Supply voltage (V+)-(V-) specified range | VS | 1.8 | 5 | 5.5 | V | Over operating free-air temperature range; dual-supply equivalent ±0.9 V to ±2.75 V | 7 |
| Specified temperature range | TA | -40 | 25 | 125 | °C | Over operating free-air temperature range | 7 |
| Input offset voltage | VOS | 8 | 50 | µV | VS = 5 V | 9 | |
| Input offset voltage versus temperature | dVOS/dT | 0.02 | 0.25 | µV/°C | At TA = -40°C to +125°C | 9 | |
| Input offset voltage versus power supply | PSRR | 1 | 10 | µV/V | At TA = -40°C to +125°C | 9 | |
| Input bias current | IB | -500 | 200 | 500 | pA | At 25°C | 9 |
| Input bias current | IB | -300 | 300 | pA | At TA = -40°C to +125°C | 9 | |
| Input offset current | IOS | -1000 | 400 | 1000 | pA | At 25°C | 9 |
| Common-mode voltage range (relative to V- / V+ rails) | VCM | -0.1 | 0.1 | V | 9 | ||
| Common-mode rejection ratio | CMRR | 100 | 115 | dB | At TA = -40°C to +125°C, (V-), 0.1 V < VCM < (V+) + 0.1 V | 9 | |
| Open-loop voltage gain | AOL | 100 | 115 | dB | At TA = -40°C to +125°C, (V-) + 100 mV < VO < (V+), 100 mV, RL = 10 kΩ | 9 | |
| Voltage output swing from rail | VO | 30 | 100 | mV | At TA = -40°C to +125°C | 9 | |
| Short-circuit current | ISC | -5 | 5 | mA | 9 | ||
| Specified voltage range | VS | 1.8 | 5.5 | V | 9 | ||
| Quiescent current per amplifier | IQ | 21 | 35 | µA | At TA = -40°C to +125°C, IO = 0 mA | 9 | |
| Junction-to-ambient thermal resistance (DCK SC70) | RθJA | 298.4 | °C/W | DCK (SC70) 5-pin package | 8 | ||
| Junction-to-case (top) thermal resistance (DCK SC70) | RθJC(top) | 65.4 | °C/W | DCK (SC70) 5-pin package | 8 | ||
| Junction-to-board thermal resistance (DCK SC70) | RθJB | 97.1 | °C/W | DCK (SC70) 5-pin package | 8 | ||
| Junction-to-top characterization parameter (DCK SC70) | ψJT | 0.8 | °C/W | DCK (SC70) 5-pin package | 8 | ||
| Junction-to-board characterization parameter (DCK SC70) | ψJB | 95.5 | °C/W | DCK (SC70) 5-pin package | 8 |
CAD (KiCad official)
- Symbol:
OPA330AIDCKT - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
opa330aidckt-etched.step/opa330aidckt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa330aidckt.step/opa330aidckt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
a6224045ef76c904, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).