Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA330AIDCKR

Texas Instruments · Precision Op Amps · SC-70-5

OPA330AIDCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +IN input Positive (noninverting) input; common-mode voltage range (V-) - 0.1 V to (V+) + 0.1 V; maximum input bias current ±300 pA over full temperature range.
2 V- power_in Negative (lowest) power supply with specified voltage range 1.8 V to 5.5 V.
3 -IN input Negative (inverting) input; common-mode voltage range (V-) - 0.1 V to (V+) + 0.1 V; maximum input bias current ±300 pA over full temperature range.
4 OUT output Output with voltage swing from supply rails of 30 mV to 100 mV at TA = -40°C to +125°C.
5 V+ power_in Positive (highest) power supply with specified voltage range 1.8 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VS = (V+) – (V–) VS 7 V 7
Signal input terminals current -10 10 mA 7
Operating range, TA TA -40 150 °C 7
Junction, TJ TJ 150 °C 7
Storage, Tstg Tstg -65 150 °C 7
Specified voltage range (total supply, (V+) – (V–)) VS 1.8 5 5.5 V 7
Specified temperature TA -40 25 125 °C 7
Junction-to-ambient thermal resistance (DCK, SC70-5) RθJA 298.4 °C/W 8
Junction-to-case (top) thermal resistance (DCK, SC70-5) RθJC(top) 65.4 °C/W 8
Junction-to-board thermal resistance (DCK, SC70-5) RθJB 97.1 °C/W 8
Input offset voltage VOS 8 50 µV VS = 5 V 9
Input offset voltage versus temperature dVOS/dT 0.02 0.25 µV/°C At TA = –40°C to +125°C 9
Input offset voltage versus power supply PSRR 1 10 µV/V At TA = –40°C to +125°C 9
Channel separation, dc 0.1 µV/V 9
Input bias current IB -500 200 500 pA At 25°C 9
Input bias current over temperature IB -300 300 pA At TA = –40°C to +125°C 9
Input offset current IOS -1000 400 1000 pA At 25°C 9
Input voltage noise density en 55 nV/√Hz f = 1 kHz 9
Input voltage noise en 0.3 µVPP f = 0.01 Hz to 1 Hz 9
Input voltage noise en 1.1 µVPP f = 0.1 Hz to 10 Hz 9
Input current noise in 100 fA/√Hz f = 10 Hz 9
Common-mode rejection ratio CMRR 100 115 dB At TA = –40°C to +125°C, (V–) – 0.1 V < VCM < (V+) + 0.1 V 9
Input capacitance, differential 2 pF 9
Input capacitance, common-mode 4 pF 9
Open-loop voltage gain AOL 100 115 dB At TA = –40°C to +125°C, (V–) + 100 mV < VO < (V+) – 100 mV, RL = 10 kΩ 9
Gain-bandwidth product GBW 350 kHz CL = 100 pF 9
Slew rate SR 0.16 V/µs G = +1 9
Voltage output swing from rail 30 100 mV At TA = –40°C to +125°C 9
Short-circuit current ISC -5 5 mA 9
Open-loop output impedance 2 kΩ f = 350 kHz, IO = 0 mA 9
Specified voltage range VS 1.8 5.5 V 9
Quiescent current per amplifier IQ 21 35 µA At TA = –40°C to +125°C, IO = 0 mA 9
Turnon time 100 µs VS = 5 V 9

CAD (KiCad official)

  • Symbol: OPA330AIDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: opa330aidckr-etched.step / opa330aidckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa330aidckr.step / opa330aidckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (55 pp, sha256 a6224045ef76c904, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF