main
Ray Publish 0.1.0 8480586
{
  "slug": "opa322saidbvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Operational Amplifier, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "opa322saidbvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "opa322saidbvr.kicad_sym",
    "opa322saidbvr.kicad_mod",
    "opa322saidbvr.glb",
    "opa322saidbvr.step",
    "opa322saidbvr.lbr",
    "docs/hero.png",
    "docs/opa322saidbvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "OPA322SAIDBVR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Amplifiers/Comparators",
    "subcategory": "Operational Amplifier",
    "datasheet": "https://www.ti.com/cn/lit/gpn/opa2322",
    "parts": {
      "symbol": "opa322saidbvr.kicad_sym",
      "footprint": "opa322saidbvr.kicad_mod",
      "model_3d": "opa322saidbvr-etched.glb",
      "model_3d_plain": "opa322saidbvr.glb",
      "model_3d_step": "opa322saidbvr-etched.step",
      "model_3d_step_plain": "opa322saidbvr.step",
      "lbr": "opa322saidbvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2869000"
    },
    "pins": [
      {
        "number": "1",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply pin; specified operating supply range is 1.8 V to 5.5 V (or \u00b10.9 V to \u00b12.75 V split supply), absolute maximum (V+)-(V-) supply voltage is 6 V; a local 0.001 \u00b5F to 0.1 \u00b5F ceramic bypass capacitor is recommended."
      },
      {
        "number": "2",
        "name": "SHDN",
        "type": "input",
        "description": "Active-high shutdown/enable input referenced to V-; a logic high of (V+)-0.1 V up to V+ enables the amplifier while a logic low of (V-)+0.1 V down to V- disables it, with 5.5 V max allowed relative to V-; the pin must be driven to a valid level and not left floating, and disabled channels draw a typical 0.1 \u00b5A (max 0.5 \u00b5A) quiescent current."
      },
      {
        "number": "3",
        "name": "-IN",
        "type": "input",
        "description": "Inverting input of the operational amplifier; common-mode input voltage range is (V-)-0.1 V to (V+)+0.1 V, and input current should be limited to 10 mA or less (via series resistor) for signals overdriving the supply rails by more than 0.5 V."
      },
      {
        "number": "4",
        "name": "+IN",
        "type": "input",
        "description": "Non-inverting input of the operational amplifier; common-mode input voltage range is (V-)-0.1 V to (V+)+0.1 V, and input current should be limited to 10 mA or less for overdrive protection."
      },
      {
        "number": "5",
        "name": "V-",
        "type": "power_in",
        "description": "Negative supply pin (ground reference in single-supply operation); together with V+ establishes the 1.8 V to 5.5 V (or \u00b10.9 V to \u00b12.75 V) supply range and should have a local ceramic bypass capacitor."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Amplifier output; rail-to-rail output typically swings within 10 mV (20 mV max) of either supply rail into a 10-k\u03a9 load, delivers up to \u00b165 mA short-circuit current at VS=5.5 V, and enters a high-impedance state when the device is disabled via SHDN."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 51,
        "cost_usd": 0.2958,
        "at": "2026-09-23T14:07:51"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/opa2322",
        "pages": 51,
        "sha256": "b4b7c5ce416fcd4d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  }
}