Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA317QDBVRQ1

Texas Instruments · Precision Op Amps · SOT-23-5

OPA317QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Output of the amplifier; capable of driving ≤ 10 kΩ loads between V+ and ground.
2 V- power_in Negative (lowest) power supply rail.
3 +IN input Noninverting input; input voltage must be between (V-) - 0.3 V and (V+) + 0.3 V.
4 -IN input Inverting input; input voltage must be between (V-) - 0.3 V and (V+) + 0.3 V.
5 V+ power_in Positive (highest) power supply rail; supply voltage range 1.8 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (VS = 5 V) VOS -90 20 90 μV VS = 5 V 8
Input offset voltage over temperature VOS -100 100 μV TA = –40°C to +125°C, VS = 5 V 8
Input offset voltage vs power supply (PSRR) PSRR 1 10 μV/V TA = –40°C to +125°C, VS = 1.8 V to 5.5 V 8
Input bias current IB -275 275 pA 8
Input bias current over temperature IB -300 300 pA TA = –40°C to +125°C 8
Input offset current IOS -400 400 pA 8
Common-mode rejection ratio CMRR 95 108 dB TA = –40°C to +125°C, (V–) – 0.1 V < VCM < (V+) + 0.1 V 8
Common-mode rejection ratio (VS = 5.5 V) CMRR 95 108 dB (V–) – 0.1 V < VCM < (V+) + 0.1 V, VS = 5.5 V 8
Open-loop voltage gain AOL 100 110 dB TA = –40°C to +125°C, RL = 10 kΩ, (V–) + 100 mV < VO < (V+) – 100 mV 8
Voltage output swing from rail 30 100 mV TA = –40°C to +125°C 8
Short-circuit current ISC -5 5 mA 8
Specified supply voltage VS 1.8 5.5 V 8
Quiescent current per amplifier IQ 21 35 μA TA = –40°C to +125°C, IO = 0 8
Supply voltage (absolute maximum) VS 7 V VS = (V+) – (V–) 6
Signal input terminals current -10 10 mA 6
Operating temperature (absolute maximum) TA -40 150 °C Over operating free-air temperature range 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Supply voltage (recommended) V+ – V– 1.8 5.5 V Over operating free-air temperature range 6
Specified temperature (recommended) TA -40 125 °C Over operating free-air temperature range 6
Junction-to-ambient thermal resistance (DBV SOT-23) RθJA 220.8 °C/W 7
Junction-to-case (top) thermal resistance (DBV SOT-23) RθJC(top) 97.5 °C/W 7
Junction-to-board thermal resistance (DBV SOT-23) RθJB 61.7 °C/W 7
Junction-to-top characterization parameter (DBV SOT-23) ψJT 7.6 °C/W 7
Junction-to-board characterization parameter (DBV SOT-23) ψJB 61.1 °C/W 7

CAD (KiCad official)

  • Symbol: OPA317QDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: opa317qdbvrq1-etched.step / opa317qdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa317qdbvrq1.step / opa317qdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 cbf6a18ea1d6a40f, retrieved 2026-10-07, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF