component
OPA317IDR
Public Made by Adomby adom
Texas Instruments Precision Op Amps, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownOPA317IDR
Texas Instruments · Precision Op Amps · SOIC-8
OPA317IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | -IN | input | Inverting input; accepts signal voltages within common-mode input range of (V-) - 0.1 V to (V+) + 0.1 V. |
| 3 | +IN | input | Noninverting input; accepts signal voltages within common-mode input range of (V-) - 0.1 V to (V+) + 0.1 V. |
| 4 | V- | power_in | Negative (lowest) power supply; connect to ground in single-supply mode or negative rail in dual-supply mode for supply voltage range 1.8 V to 5.5 V. |
| 5 | NC | unconnected | No internal connection. |
| 6 | OUT | output | Output; rail-to-rail voltage output swinging within 30 mV to 100 mV of the supply rails with 10 kΩ load. |
| 7 | V+ | power_in | Positive (highest) power supply; connect to positive supply rail for supply voltage range 1.8 V to 5.5 V with respect to V-. |
| 8 | NC | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
OPA317IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
opa317idr-etched.step/opa317idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa317idr.step/opa317idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
dd3552b63382fb56, retrieved 2026-09-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).