main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers opa317idbvr: viewers rendered from the public page · Ray
opa317idbvr-etched.glb Publish 0.1.0 · Ray
opa317idbvr-etched.step opa317idbvr: factory component page (tier=mfr) · Ray
opa317idbvr-hero.glb opa317idbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
opa317idbvr-hero.overlay.json Publish 0.1.0 · Ray
opa317idbvr.glb Publish 0.1.0 · Ray
opa317idbvr.kicad_mod Publish 0.1.0 · Ray
opa317idbvr.kicad_sym Publish 0.1.0 · Ray
opa317idbvr.lbr Publish 0.1.0 · Ray
opa317idbvr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

OPA317IDBVR

Texas Instruments · Precision Op Amps · SOT-23-5

OPA317IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, which swings to within 100 mV of the supply rails under normal test conditions.
2 V- power_in Negative (lowest) power supply; the device operates from 1.8 V to 5.5 V between V+ and V-.
3 +IN input Noninverting input whose common-mode range extends 0.1 V beyond the supply rails.
4 -IN input Inverting input whose common-mode range extends 0.1 V beyond the supply rails.
5 V+ power_in Positive (highest) power supply; the device operates from 1.8 V to 5.5 V between V+ and V-.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 7 V VS = (V+), (V-) 5
Signal input terminals current -10 10 mA 5
Operating temperature TA -40 150 °C 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage (V+, V-) 1.8 5.5 V Printed as 1.8 (±0.9) and 5.5 (±2.25) 5
Specified temperature TA -40 125 °C 5
Input offset voltage VOS -90 20 90 μV VS = 5 V 7
Input offset voltage over temperature VOS -100 100 μV TA = -40°C to +125°C, VS = 5 V 7
Input offset voltage vs power supply PSRR 1 10 μV/V TA = -40°C to +125°C, VS = 1.8 V to 5.5 V 7
Input bias current IB -275 275 pA 7
Input bias current over temperature IB -300 300 pA TA = -40°C to +125°C 7
Input offset current IOS -400 400 pA 7
Common-mode rejection ratio CMRR 95 108 dB TA = -40°C to +125°C, (V-), 0.1 V < VCM < (V+) + 0.1 V 7
Common-mode rejection ratio at VS = 5.5 V CMRR 95 108 dB TA = -40°C to +125°C, (V-), 0.1 V < VCM < (V+) + 0.1 V, VS = 5.5 V 7
Open-loop voltage gain AOL 100 110 dB TA = -40°C to +125°C, RL = 10 kΩ, (V-) + 100 mV < VO < (V+), 100 mV 7
Voltage output swing from rail 30 100 mV TA = -40°C to +125°C 7
Short-circuit current ISC -5 5 mA 7
Specified voltage VS 1.8 5.5 V 7
Quiescent current per amplifier IQ 21 35 μA TA = -40°C to +125°C, IO = 0 7
Junction-to-ambient thermal resistance (DBV) RθJA 220.8 °C/W DBV (SOT-23) 5-pin package 6
Junction-to-case (top) thermal resistance (DBV) RθJC(top) 97.5 °C/W DBV (SOT-23) 5-pin package 6
Junction-to-board thermal resistance (DBV) RθJB 61.7 °C/W DBV (SOT-23) 5-pin package 6
Junction-to-top characterization parameter (DBV) ψJT 7.6 °C/W DBV (SOT-23) 5-pin package 6
Junction-to-board characterization parameter (DBV) ψJB 61.1 °C/W DBV (SOT-23) 5-pin package 6

CAD (KiCad official)

  • Symbol: OPA317IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa317idbvr-etched.step / opa317idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa317idbvr.step / opa317idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 dd3552b63382fb56, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF