main
Ray Publish 0.1.0 16deca9
{
  "slug": "opa2734aidgsr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Precision Op Amps, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "opa2734aidgsr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "opa2734aidgsr.kicad_sym",
    "opa2734aidgsr.kicad_mod",
    "opa2734aidgsr.glb",
    "opa2734aidgsr.step",
    "opa2734aidgsr.lbr",
    "docs/hero.png",
    "docs/opa2734aidgsr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "opa2734aidgsr-hero.glb",
    "opa2734aidgsr-hero.overlay.json",
    "opa2734aidgsr-etched.glb"
  ],
  "component": {
    "mpn": "OPA2734AIDGSR",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-10-0.5mm",
    "pin_count": 10,
    "category": "Amplifiers/Comparators",
    "subcategory": "Precision Op Amps",
    "datasheet": "https://www.ti.com/lit/ds/symlink/opa2734.pdf",
    "parts": {
      "symbol": "opa2734aidgsr.kicad_sym",
      "footprint": "opa2734aidgsr.kicad_mod",
      "model_3d": "opa2734aidgsr-hero.glb",
      "model_3d_plain": "opa2734aidgsr-etched.glb",
      "model_3d_step": "opa2734aidgsr-etched.step",
      "model_3d_step_plain": "opa2734aidgsr.step",
      "lbr": "opa2734aidgsr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2060894",
      "digikey": "OPA2734AIDGSR-ND",
      "mouser": "595-OPA2734AIDGSR"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T07:39:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "OPA2734AIDGSR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-OPA2734AIDGSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT A",
        "type": "output",
        "description": "Amplifier A output, rail-to-rail swing within 50mV of the rails and high-impedance when Enable A is low."
      },
      {
        "number": "2",
        "name": "-IN A",
        "type": "input",
        "description": "Amplifier A inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more."
      },
      {
        "number": "3",
        "name": "+IN A",
        "type": "input",
        "description": "Amplifier A non-inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more."
      },
      {
        "number": "4",
        "name": "V-",
        "type": "power_in",
        "description": "Negative supply (ground in single-supply use); supply range is 2.7V to 12V total, and the Enable inputs are referenced to this pin."
      },
      {
        "number": "5",
        "name": "Enable A",
        "type": "input",
        "description": "Amplifier A enable/shutdown, CMOS input referenced to V−: logic high above (V−)+2V enables, logic low below (V−)+0.8V shuts down, and an open pin enables the amplifier via internal pull-up."
      },
      {
        "number": "6",
        "name": "Enable B",
        "type": "input",
        "description": "Amplifier B enable/shutdown, CMOS input referenced to V−: logic high above (V−)+2V enables, logic low below (V−)+0.8V shuts down, and an open pin enables the amplifier via internal pull-up."
      },
      {
        "number": "7",
        "name": "+IN B",
        "type": "input",
        "description": "Amplifier B non-inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more."
      },
      {
        "number": "8",
        "name": "-IN B",
        "type": "input",
        "description": "Amplifier B inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more."
      },
      {
        "number": "9",
        "name": "OUT B",
        "type": "output",
        "description": "Amplifier B output, rail-to-rail swing within 50mV of the rails and high-impedance when Enable B is low."
      },
      {
        "number": "10",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply, 2.7V to 12V operating range (absolute maximum 13.2V), with a 0.1µF capacitor placed closely across the supply pins."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin-configuration drawing for OPA2734 MSOP-10 (DGS) on page 4 is extracted as text, so the pin-n; Datasheet pin-table entries use the general MSOP-10 'Pin configurations' figure; the ordering part O"
        ],
        "pages_sent": 34,
        "cost_usd": 0.1218,
        "at": "2026-11-11T07:39:41"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/opa2734.pdf",
        "pages": 34,
        "sha256": "4f28e5b78b0e04db",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "opa2734aidgsr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "opa2734aidgsr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c4f08d6fe86651a710e1a9a68c6e2d3e1a51521edffd6b5dca33135708e56c4c",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DGS0010A",
      "source_page": 25,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E": {
        "nom_mm": 4.9,
        "range_mm": [
          4.75,
          5.05
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "opa2734aidgsr.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}