main
History Download
Ray Publish 0.1.0 16deca9

OPA2734AIDGSR

Texas Instruments · Precision Op Amps · VSSOP-10-0.5mm

OPA2734AIDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output, rail-to-rail swing within 50mV of the rails and high-impedance when Enable A is low.
2 -IN A input Amplifier A inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more.
3 +IN A input Amplifier A non-inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more.
4 V- power_in Negative supply (ground in single-supply use); supply range is 2.7V to 12V total, and the Enable inputs are referenced to this pin.
5 Enable A input Amplifier A enable/shutdown, CMOS input referenced to V−: logic high above (V−)+2V enables, logic low below (V−)+0.8V shuts down, and an open pin enables the amplifier via internal pull-up.
6 Enable B input Amplifier B enable/shutdown, CMOS input referenced to V−: logic high above (V−)+2V enables, logic low below (V−)+0.8V shuts down, and an open pin enables the amplifier via internal pull-up.
7 +IN B input Amplifier B non-inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more.
8 -IN B input Amplifier B inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more.
9 OUT B output Amplifier B output, rail-to-rail swing within 50mV of the rails and high-impedance when Enable B is low.
10 V+ power_in Positive supply, 2.7V to 12V operating range (absolute maximum 13.2V), with a 0.1µF capacitor placed closely across the supply pins.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-10-0.5mm
Category Amplifiers/Comparators
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 1 5 µV 3
Offset Voltage vs Temperature dVOS/dT 0.01 0.05 µV/°C 3
Offset Voltage vs Power Supply (PSRR) PSRR 0.2 1.8 µV/V VS = 2.7V to 12V, VCM = 0V 3
Input Bias Current IB -200 100 200 pA VCM = VS/2 3
Input Offset Current IOS -300 200 300 pA VCM = VS/2 3
Common-Mode Rejection Ratio CMRR 115 130 dB (V−) − 0.1V < VCM < (V+) − 1.5V 3
Open-Loop Voltage Gain AOL 115 130 dB (V−) + 100mV < VO < (V+) − 100mV 3
Voltage Output Swing from Rail 20 50 mV RL = 10kΩ 3
Quiescent Current in Shutdown (per amplifier) IQSD 4 9 µA 3
Operating Voltage Range VS 2.7 12 V 3
Quiescent Current (per amplifier) IQ 0.6 0.75 mA IO = 0 3
Specified Temperature Range -40 85 °C 3
Operating Temperature Range -40 150 °C 3
Storage Temperature Range -65 150 °C 3
Supply Voltage 13.2 V 2
Signal Input Terminals Current -10 10 mA 2
Operating Temperature -40 150 °C 2
Storage Temperature -65 150 °C 2
Junction Temperature 150 °C 2
Lead Temperature (soldering) 300 °C soldering, 10s 2
ESD Rating (Human Body Model), OPA735, OPA2734, OPA2735 2000 V Human Body Model 2
Thermal Resistance, junction-to-ambient (MSOP-8, MSOP-10, SO-8) JA 150 °C/W MSOP-8, MSOP-10, SO-8 package 3

CAD (KiCad official)

  • Symbol: OPA2734AIDGSR
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
  • 3D model files: opa2734aidgsr-etched.step / opa2734aidgsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2734aidgsr.step / opa2734aidgsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 4f28e5b78b0e04db, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF