component
OPA2691I-14DR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownOPA2691I-14DR
Texas Instruments · Operational Amplifier · SOIC-14
OPA2691I-14DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -In A | input | Channel A inverting input; the input signal range is limited to the common-mode input range of ±3.5V typical with ±5V supplies. |
| 2 | +In A | input | Channel A noninverting input, high-impedance (100 |
| 3 | DIS A | input | Channel A disable control; pulling LOW shuts the channel down to less than 150µA/ch with the output in a high-impedance state, while leaving open or holding HIGH gives normal operation. |
| 4 | -VS | power_in | Negative power supply; the device operates from ±2V to ±6V dual supply (±5V specified) with an absolute maximum of ±6.5V. |
| 5 | DIS B | input | Channel B disable control; pulling LOW shuts the channel down to less than 150µA/ch with the output in a high-impedance state, while leaving open or holding HIGH gives normal operation. |
| 6 | +In B | input | Channel B noninverting input, high-impedance (100 |
| 7 | -In B | input | Channel B inverting input; the input signal range is limited to the common-mode input range of ±3.5V typical with ±5V supplies. |
| 8 | Out B | output | Channel B output; drives up to ±190mA typical sourcing/sinking at VO = 0 and enters a high-impedance state when channel B is disabled. |
| 9 | NC | unconnected | No internal connection. |
| 10 | NC | unconnected | No internal connection. |
| 11 | +VS | power_in | Positive power supply; the device operates from +5V to +12V single supply or ±2.5V to ±6V dual supply, with an absolute maximum of ±6.5V. |
| 12 | NC | unconnected | No internal connection. |
| 13 | NC | unconnected | No internal connection. |
| 14 | Out A | output | Channel A output; drives up to ±190mA typical sourcing/sinking at VO = 0 and enters a high-impedance state when channel A is disabled. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
OPA2691I-14DR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
opa2691i-14dr-etched.step/opa2691i-14dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2691i-14dr.step/opa2691i-14dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
ad1546153594907b, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).