Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2674IDR

Texas Instruments · Operational Amplifier · SOIC-8

OPA2674IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out A output Channel A output, delivers ±500mA typ output current (±380mA min at +25°C) with ±800mA typ short-circuit current limit.
2 -In A input Channel A inverting input; differential input voltage limited to ±1.2V and common-mode within ±VS, with ESD rating >500V HBM.
3 +In A input Channel A noninverting input; differential input voltage limited to ±1.2V, common-mode range ±VS absolute maximum (±4.5V typ CMIR at ±6V supplies).
4 -VS power_in Negative power supply (ground in single-supply operation); total supply to +VS is limited to ±6.5V absolute maximum.
5 +In B input Channel B noninverting input; differential input voltage limited to ±1.2V, common-mode range ±VS absolute maximum (±4.5V typ CMIR at ±6V supplies).
6 -In B input Channel B inverting input; differential input voltage limited to ±1.2V and common-mode within ±VS, with ESD rating >500V HBM.
7 Out B output Channel B output, delivers ±500mA typ output current (±380mA min at +25°C) with ±800mA typ short-circuit current limit.
8 +VS power_in Positive power supply; specified at ±6V (+12V single supply) with ±6.5V absolute maximum supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Absolute Max: Power Supply Voltage (±VS total) 6.5 VDC 2
Absolute Max: Differential Input Voltage 1.2 V 2
Absolute Max: Storage Temperature Range -65 125 °C 2
Absolute Max: Lead Temperature (soldering) 300 °C soldering, 10s 2
Absolute Max: Junction Temperature TJ 150 °C 2
ESD Rating: Human Body Model (HBM) 2000 V Human Body Model (HBM) 2
[±6V] Small-Signal Bandwidth 170 225 MHz G = +2, RF = 475Ω 3
[±6V] Small-Signal Bandwidth 170 220 MHz G = +4, RF = 402Ω 3
[±6V] Small-Signal Bandwidth 200 260 MHz G = +8, RF = 250Ω 3
[±6V] Bandwidth for 0.1dB Gain Flatness 40 100 MHz G = +4, VO = 0.5VPP 3
[±6V] Slew Rate 1500 2000 V/µs G = +4, 5V step 3
[±6V] 2nd-Harmonic Distortion -72 -68 dBc G = +4, f = 5MHz, VO = 2VPP, RL = 100Ω 3
[±6V] 2nd-Harmonic Distortion -82 -80 dBc G = +4, f = 5MHz, VO = 2VPP, RL ≥ 500Ω 3
[±6V] Input Voltage Noise 2 2.6 nV/√Hz f > 1MHz 3
[±6V] Noninverting Input Current Noise 16 20 pA/√Hz f > 1MHz 3
[±6V] Inverting Input Current Noise 24 29 pA/√Hz f > 1MHz 3
[±6V] Open-Loop Transimpedance Gain 80 135 kΩ VO = 0V, RL = 100Ω 3
[±6V] Input Offset Voltage (max magnitude ±4.5) 1 4.5 mV VCM = 0V 3
[±6V] Offset Voltage Drift 4 10 µV/°C VCM = 0V 3
[±6V] Noninverting Input Bias Current (max magnitude ±30) 10 30 µA VCM = 0V 3
[±6V] Noninverting Input Bias Current Drift 5 50 nA/°C VCM = 0V 3
[±6V] Inverting Input Bias Current (max magnitude ±35) 10 35 µA VCM = 0V 3
[±6V] Inverting Input Bias Current Drift 10 100 nA/°C VCM = 0V 3
[±6V] Common-Mode Input Range (CMIR) 4.1 4.5 V 3
[±6V] Common-Mode Rejection Ratio (CMRR) 51 55 dB VCM = 0V, Input-Referred 3
[±6V] Minimum Inverting Input Resistance 12 22 Ω Open-Loop 3
[±6V] Maximum Inverting Input Resistance 22 35 Ω Open-Loop 3
[±6V] Output Voltage Swing (No Load) 4.9 5.1 V No Load 3
[±6V] Output Voltage Swing (RL=100Ω) 4.8 5 V RL = 100Ω 3
[±6V] Current Output 380 500 mA VO = 0 3
[±6V] Maximum Operating Voltage 6.3 V 4
[±6V] Maximum Quiescent Current 18 18.6 mA VS = ±6V, Both Channels 4
[±6V] Minimum Quiescent Current 17.4 18 mA VS = ±6V, Both Channels 4
[±6V] Power-Supply Rejection Ratio (PSRR) 51 56 dB f = 100kHz, Input-Referred 4
[+5V] Small-Signal Bandwidth 140 175 MHz G = +2, RF = 511Ω 5
[+5V] Small-Signal Bandwidth 130 168 MHz G = +4, RF = 453Ω 5
[+5V] Bandwidth for 0.1dB Gain Flatness 24 34 MHz G = +4, VO = 0.5VPP 5
[+5V] Slew Rate 650 900 V/µs G = +4, 2V Step 5
[+5V] 2nd-Harmonic Distortion -65 -63 dBc G = +4, f = 5MHz, VO = 2VPP, RL = 100Ω 5
[+5V] 2nd-Harmonic Distortion -72 -70 dBc G = +4, f = 5MHz, VO = 2VPP, RL ≥ 500Ω 5
[+5V] Input Voltage Noise 2 2.6 nV/√Hz f > 1MHz 5
[+5V] Noninverting Input Current Noise 16 20 pA/√Hz f > 1MHz 5
[+5V] Inverting Input Current Noise 24 29 pA/√Hz f > 1MHz 5
[+5V] Open-Loop Transimpedance Gain 72 110 kΩ VO = 0V, RL = 100Ω 5
[+5V] Input Offset Voltage (max magnitude ±3.5) 0.8 3.5 mV VCM = 0V 5
[+5V] Noninverting Input Bias Current (max magnitude ±30) 10 30 µA VCM = 0V 5
[+5V] Inverting Input Bias Current (max magnitude ±35) 10 35 µA VCM = 0V 5
[+5V] Most Positive Input Voltage 3.3 3.7 V 5
[+5V] Most Negative Input Voltage 1.7 1.3 V 5
[+5V] Common-Mode Rejection Ratio (CMRR) 49 53 dB VCM = 2.5V, Input-Referred 5
[+5V] Most Positive Output Voltage (No Load) 3.9 4.1 V No Load 5
[+5V] Most Positive Output Voltage (RL=100Ω) 3.8 3.9 V RL = 100Ω 5
[+5V] Most Negative Output Voltage (No Load) 0.8 1 V No Load 5
[+5V] Most Negative Output Voltage (RL=100Ω) 1 1.1 V RL = 100Ω 5
[+5V] Current Output 200 260 mA VO = 0 5
[+5V] Maximum Operating Voltage 12.6 V 6
[+5V] Maximum Quiescent Current 13.6 14.8 mA VS = +5V, Both Channels 6
[+5V] Minimum Quiescent Current 12 13.6 mA VS = +5V, Both Channels 6
Thermal Resistance, Junction-to-Ambient (SO-8, ID) JA 125 °C/W ID SO-8 package 4

CAD (KiCad official)

  • Symbol: OPA2674IDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: opa2674idr-etched.step / opa2674idr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2674idr.step / opa2674idr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 1d22e209b42d9d89, retrieved 2026-10-01, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF