main
Ray Publish 0.1.0 20ed8f6

OPA2388QDGKRQ1

Texas Instruments · Precision OpAmps · VSSOP-8

OPA2388QDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT A output Output of channel A, which swings within 5 mV of the supplies under normal test conditions.
2 -IN A input Inverting input of channel A, with typical input bias current of approximately 30 pA during normal linear operation.
3 +IN A input Noninverting input of channel A, whose common-mode range extends 0.1 V beyond the supply rails without input crossover distortion.
4 V- power_in Negative (lowest) power supply; total supply VS = (V+) - (V-) is 2.5 V to 5.5 V single-supply or ±1.25 V to ±2.75 V dual-supply.
5 +IN B input Noninverting input of channel B, whose common-mode range extends 0.1 V beyond the supply rails without input crossover distortion.
6 -IN B input Inverting input of channel B, with typical input bias current of approximately 30 pA during normal linear operation.
7 OUT B output Output of channel B, which swings within 5 mV of the supplies under normal test conditions.
8 V+ power_in Positive (highest) power supply; the absolute maximum single-supply voltage is 6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, single-supply (absolute maximum) VS 6 V Single-supply, VS = (V+), (V-) 4
Supply voltage, dual-supply (absolute maximum) VS -3 3 V Dual-supply, VS = (V+), (V-) 4
Signal input pins current -10 10 mA 4
Operating temperature (absolute maximum) TA -55 150 °C 4
Junction temperature (absolute maximum) TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage, single-supply (recommended) VS 2.5 5.5 V Single-supply 4
Supply voltage, dual-supply (recommended) VS 1.25 2.75 V Dual-supply 4
Specified temperature (recommended) TA -40 125 °C 4
Input offset voltage, OPA2388-Q1 VOS -5 1.5 5 µV TA = 25°C; VS = 2.5 V to 5.5 V (±1.25 V to ±2.75 V); RLOAD = 10 kΩ 6
Input offset voltage over temperature VOS -7.5 7.5 µV TA = -40°C to +125°C 6
Input offset voltage drift dVOS/dT -0.05 0.005 0.05 µV/°C TA = -40°C to +125°C 6
Power-supply rejection ratio PSRR -1 0.1 1 µV/V TA = -40°C to +125°C 6
Input bias current IB -350 30 350 pA RIN = 100 kΩ 6
Input bias current IB -400 400 pA TA = 0°C to +85°C 6
Input bias current IB -700 700 pA TA = -40°C to +125°C 6
Input offset current IOS -700 700 pA RIN = 100 kΩ 6
Input offset current IOS -800 800 pA TA = 0°C to +85°C 6
Common-mode rejection ratio CMRR 124 138 dB (V-), 0.1 V < VCM < (V+) + 0.1 V, VS = ±1.25 V 6
Common-mode rejection ratio CMRR 124 140 dB (V-), 0.1 V < VCM < (V+) + 0.1 V, VS = ±2.75 V 6
Common-mode rejection ratio over temperature CMRR 114 134 dB (V-) < VCM < (V+) + 0.1 V, TA = -40°C to +125°C, VS = ±1.25 V 6
Common-mode rejection ratio over temperature CMRR 124 140 dB (V-), 0.05 V < VCM < (V+) + 0.1 V, TA = -40°C to +125°C, VS = ±2.75 V 6
Open-loop voltage gain AOL 126 148 dB (V-) + 0.15 V < VO < (V+), 0.15 V 6
Open-loop voltage gain over temperature AOL 120 126 dB TA = -40°C to +125°C 6
Open-loop voltage gain, RLOAD = 2 kΩ AOL 126 148 dB (V-) + 0.25 V < VO < (V+), 0.25 V, RLOAD = 2 kΩ 6
Open-loop voltage gain, RLOAD = 2 kΩ, over temperature AOL 120 148 dB (V-) + 0.30 V < VO < (V+), 0.30 V, RLOAD = 2 kΩ, TA = -40°C to +125°C 6
Output voltage swing from positive rail VO 1 15 mV Positive rail, no load 7
Output voltage swing from positive rail VO 5 20 mV Positive rail 7
Output voltage swing from positive rail, RLOAD = 2 kΩ VO 20 50 mV Positive rail, RLOAD = 2 kΩ 7
Output voltage swing from negative rail VO 5 15 mV Negative rail, no load 7
Output voltage swing from negative rail VO 10 20 mV Negative rail 7
Output voltage swing from negative rail, RLOAD = 2 kΩ VO 40 60 mV Negative rail, RLOAD = 2 kΩ 7
Output voltage swing from rail over temperature, both rails VO 10 25 mV TA = -40°C to +125°C, both rails, RLOAD = 10 kΩ 7
Short-circuit current ISC -60 60 mA VS = 5.5 V 7
Short-circuit current ISC -30 30 mA VS = 2.5 V 7
Quiescent current per amplifier IQ 1.7 2.4 mA VS = ±1.25 V (VS = 2.5 V), IO = 0 A 7
Quiescent current per amplifier over temperature IQ 1.7 2.4 mA TA = -40°C to +125°C 7
Quiescent current per amplifier IQ 1.9 2.6 mA VS = ±2.75 V (VS = 5.5 V), IO = 0 A 7
Quiescent current per amplifier over temperature IQ 1.9 2.6 mA TA = -40°C to +125°C 7
Unity-gain bandwidth GBW 10 MHz 7
Slew rate SR 5 V/µs G = 1, 4-V step 7
Total harmonic distortion + noise THD+N 0.0005 % G = 1, f = 1 kHz, VO = 1 VRMS 7
Settling time to 0.1% tS 0.75 µs VS = ±2.5 V, G = 1, 1-V step, to 0.1% 7
Settling time to 0.01% tS 2 µs VS = ±2.5 V, G = 1, 1-V step, to 0.01% 7
Overload recovery time tOR 10 µs VIN × G = VS 7
Open-loop output impedance ZO 100 Ω f = 1 MHz, IO = 0 A 7
Input voltage noise, 0.1 Hz to 10 Hz EN 0.14 µVPP f = 0.1 Hz to 10 Hz 6
Input voltage noise density eN 7 nV/√Hz f = 10 Hz 6
Input current noise density IN 100 fA/√Hz f = 1 kHz 6
Junction-to-ambient thermal resistance (DGK VSSOP) RθJA 165 °C/W 5
Junction-to-case (top) thermal resistance (DGK VSSOP) RθJC(top) 53 °C/W 5
Junction-to-board thermal resistance (DGK VSSOP) RθJB 87 °C/W 5
Junction-to-top characterization parameter (DGK VSSOP) ΨJT 4.9 °C/W 5
Junction-to-board characterization parameter (DGK VSSOP) ΨJB 85 °C/W 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: OPA2388QDGKRQ1
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa2388qdgkrq1-etched.step / opa2388qdgkrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2388qdgkrq1.step / opa2388qdgkrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 e01d45e27a97c48d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF