Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2383DGKR

Texas Instruments · Precision Op Amps · VSSOP-8

OPA2383DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT A output Output of channel A; the rail-to-rail output swings within 5mV of the supplies under normal test conditions.
2 -IN A input Inverting input of channel A; the common-mode input range extends 100mV beyond the supply rails.
3 +IN A input Noninverting input of channel A; the common-mode input range extends 100mV beyond the supply rails.
4 V- power_in Negative (lowest) power supply; the single-supply range is 1.7V to 5.5V, or ±0.85V to ±2.75V dual supply.
5 +IN B input Noninverting input of channel B; the common-mode input range extends 100mV beyond the supply rails.
6 -IN B input Inverting input of channel B; the common-mode input range extends 100mV beyond the supply rails.
7 OUT B output Output of channel B; the rail-to-rail output swings within 5mV of the supplies under normal test conditions.
8 V+ power_in Positive (highest) power supply; the single-supply range is 1.7V to 5.5V, or ±0.85V to ±2.75V dual supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -5 0.4 5 µV VS = 5.5V 8
Input offset voltage over temperature VOS -0.5 0.5 µV TA = -40°C to +125°C 8
Input offset voltage drift dVOS/dT -0.025 0.004 0.025 μV/°C TA = -40°C to +125°C 8
Power supply rejection ratio PSRR -0.9 0.05 0.9 μV/V 8
Power supply rejection ratio over temperature PSRR -0.9 0.9 μV/V TA = -40°C to +125°C 8
Input bias current IB -62 10 62 pA 8
Input bias current IB -76 76 pA TA = -40°C to +85°C 8
Input bias current IB -212 212 pA TA = -40°C to +125°C 8
Input offset current IOS -123 20 123 pA 8
Input offset current IOS -300 300 pA TA = -40°C to +125°C 8
Common-mode rejection ratio CMRR 122 135 dB (V-), 0.1V < VCM < (V+) + 0.1V, VS = 5.5V 8
Common-mode rejection ratio over temperature CMRR 120 dB (V-), 0.1V < VCM < (V+) + 0.1V, VS = 5.5V, TA = -40°C to +125°C 8
Common-mode rejection ratio CMRR 116 130 dB (V-), 0.1V < VCM < (V+), VS = 1.7V 8
Common-mode rejection ratio over temperature CMRR 114 dB (V-), 0.1V < VCM < (V+), VS = 1.7V, TA = -40°C to +125°C 8
Open-loop voltage gain AOL 120 145 dB (V-) + 100mV < VOUT < (V+), 100mV, VS = 5.5V 8
Open-loop voltage gain AOL 120 dB (V-) + 100mV < VOUT < (V+), 100mV, VS = 1.7V 8
Open-loop voltage gain over temperature AOL 119 dB (V-) + 100mV < VOUT < (V+), 100mV, TA = -40°C to +125°C 8
Open-loop voltage gain, RL = 2kΩ AOL 119 140 dB (V-) + 150mV < VOUT < (V+), 150mV, RL = 2kΩ, VS = 5.5V 8
Open-loop voltage gain, RL = 2kΩ AOL 119 dB (V-) + 150mV < VOUT < (V+), 150mV, RL = 2kΩ, VS = 1.7V 8
Open-loop voltage gain, RL = 2kΩ over temperature AOL 118 dB (V-) + 150mV < VOUT < (V+), 150mV, RL = 2kΩ, TA = -40°C to +125°C 8
Voltage output swing from rail 1 10 mV No load 9
Voltage output swing from rail (second row, rail not labelled) 5 30 mV No load 9
Voltage output swing from rail 60 150 mV RL = 2kΩ 9
Voltage output swing from rail over temperature 155 mV RL = 2kΩ, TA = -40°C to +125°C 9
Short-circuit current ISC -28 28 mA VS = 5.5V 9
Short-circuit current ISC -2.5 2.5 mA VS = 1.7V 9
Quiescent current per amplifier IQ 65 100 μA IO = 0mA 9
Quiescent current per amplifier over temperature IQ 110 μA TA = -40°C to 125°C 9
Single-supply voltage (absolute maximum) VS 6 V Single-supply 6
Dual-supply voltage (absolute maximum) VS 3 V Dual-supply, ±3 V per rail as printed 6
Input current, all pins -10 10 mA 6
Operating temperature TA -55 150 °C 6
Junction temperature TJ -55 150 °C 6
Storage temperature Tstg -65 150 °C 6
Single-supply voltage (recommended) VS 1.7 5.5 V Single-supply 6
Dual-supply voltage (recommended, per rail magnitude) VS 0.85 2.75 V Dual-supply, ±0.85 V to ±2.75 V as printed 6
Specified temperature TA -40 125 °C 6
Junction-to-ambient thermal resistance RθJA 165 °C/W DGK (VSSOP) 8-pin 7
Junction-to-case (top) thermal resistance RθJC(top) 53 °C/W DGK (VSSOP) 8-pin 7
Junction-to-board thermal resistance RθJB 87 °C/W DGK (VSSOP) 8-pin 7
Junction-to-top characterization parameter ΨJT 4.9 °C/W DGK (VSSOP) 8-pin 7
Junction-to-board characterization parameter ΨJB 85 °C/W DGK (VSSOP) 8-pin 7

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: OPA2383DGKR
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa2383dgkr-etched.step / opa2383dgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2383dgkr.step / opa2383dgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 4851dfa92d0a5e19, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF