Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2377AIDGKT

Texas Instruments · Operational Amplifier · VSSOP-8 (DGK)

OPA2377AIDGKT from Texas Instruments, in a VSSOP-8 (DGK). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output, rail-to-rail, with continuous short-circuit current to ground of +30/-50 mA (one amplifier per package).
2 -IN A input Amplifier A inverting input, diode-clamped to the supply rails; signals more than 0.5V beyond the rails must be current limited to 10 mA or less.
3 +IN A input Amplifier A noninverting input, diode-clamped to the supply rails, with a common-mode range of (V-) - 0.1V to (V+) + 0.1V.
4 V- power_in Negative supply (ground in single-supply use); total supply VS = (V+) - (V-) is specified 2.2V to 5.5V with an absolute maximum of 7V.
5 +IN B input Amplifier B noninverting input, diode-clamped to the supply rails, with a common-mode range of (V-) - 0.1V to (V+) + 0.1V.
6 -IN B input Amplifier B inverting input, diode-clamped to the supply rails; signals more than 0.5V beyond the rails must be current limited to 10 mA or less.
7 OUT B output Amplifier B output, rail-to-rail, with continuous short-circuit current to ground of +30/-50 mA (one amplifier per package).
8 V+ power_in Positive supply, specified 2.2V to 5.5V total supply with an absolute maximum of 7V, and should be bypassed with a 0.1 µF capacitor close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8 (DGK)
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VS 7 V 2
Signal Input Terminals Voltage -0.5 0.5 V Referenced to supply rails: (V–) – 0.5 V to (V+) + 0.5 V 2
Signal Input Terminals Current -10 10 mA 2
Operating Temperature TA -40 150 °C 2
Storage Temperature TA -65 150 °C 2
Junction Temperature TJ 150 °C 2
ESD Rating Human Body Model 4000 V Human Body Model 2
ESD Rating Charged Device Model 1000 V Charged Device Model 2
ESD Rating Machine Model 200 V Machine Model 2
Specified Voltage Range VS 2.2 5.5 V 3
Specified Temperature Range -40 125 °C 3
Input Offset Voltage VOS 0.25 1 mV VS = +5V 3
Input Offset Voltage vs Temperature dVOS/dT 0.32 2 mV/°C –40°C to +125°C 3
Power Supply Rejection Ratio PSRR 5 28 mV/V VS = +2.2V to +5.5V, VCM < (V+) – 1.3V 3
Power Supply Rejection Ratio Over Temperature PSRR 5 mV/V VS = +2.2V to +5.5V, VCM < (V+) – 1.3V 3
Input Bias Current IB -10 0.2 10 pA 3
Input Offset Current IOS -10 0.2 10 pA 3
Common-Mode Rejection Ratio CMRR 70 90 dB (V–) < VCM < (V+) – 1.3 V 3
Common-Mode Voltage Range VCM -0.1 0.1 V Referenced to supply rails: (V–) – 0.1 V to (V+) + 0.1 V 3
Open-Loop Voltage Gain AOL 112 134 dB 50mV < VO < (V+) – 50mV, RL = 10kΩ 3
Open-Loop Voltage Gain (RL = 2kΩ) AOL 126 dB 100mV < VO < (V+) – 100mV, RL = 2kΩ 3
Voltage Output Swing from Rail 10 20 mV RL = 10kΩ 3
Voltage Output Swing from Rail Over Temperature 40 mV RL = 10kΩ 3
Short-Circuit Current ISC -50 30 mA 3
Quiescent Current per amplifier IQ 0.76 1.05 mA IO = 0, VS = +5.5V 3
Quiescent Current per amplifier Over Temperature IQ 1.2 mA Over temperature 3
Thermal Resistance junction-to-ambient (MSOP-8, SO-8, TSSOP-14) qJA 150 °C/W MSOP-8, SO-8, TSSOP-14 3

CAD (Adom-generated)

  • Symbol: OPA2377AIDGKT
  • Footprint: Adom_Gen:Texas_Instruments_DGK0008A
  • 3D model: generated to fit the land (STEP)
  • 3D model files: opa2377aidgkt-etched.step / opa2377aidgkt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2377aidgkt.step / opa2377aidgkt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 811f349f200096b5, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: TI DGK0008A EXAMPLE BOARD LAYOUT (4214862/A), SBOS504B p.32, LAND PATTERN EXAMPLE: 8X pads 1.4 x 0.45 mm, (R0.05) TYP corners, 6X pitch 0.65 mm, pad row centre-to-centre (4.4) mm, so pads at x = +/-2.2, y = +/-0.325, +/-0.975. Body from PACKAGE OUTLINE p.31: 3.0 x 3.0 (2.9-3.1) mm, 1.1 mm max height, lead span 4.75-5.05. Task master ruling 2026-11-21: the maker's printed land wins over VSSOP-8_2.3x2mm_P0.5mm (a 0.5-pitch land) and KiCad's VSSOP-8_3x3mm_P0.65mm (1.625 x 0.5 at +/-2.1125).

Datasheet PDF