component
OPA2376AIDR-MS
Public Made by Adomby adom
MSKSEMI Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA2376AIDR-MS
MSKSEMI · Operational Amplifier · SOP-8
OPA2376AIDR-MS from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel A output of the dual rail-to-rail I/O op amp. |
| 2 | -INA | input | Inverting input of channel A. |
| 3 | +INA | input | Noninverting input of channel A, with rail-to-rail input range and phase-reversal protection per the datasheet. |
| 4 | V- | power_in | Negative (lowest) power supply; the part runs from 2V to 5.5V single-supply (±1V to ±2.75V). |
| 5 | +INB | input | Noninverting input of channel B, with rail-to-rail input range and phase-reversal protection per the datasheet. |
| 6 | -INB | input | Inverting input of channel B. |
| 7 | OUTB | output | Channel B output of the dual rail-to-rail I/O op amp. |
| 8 | V+ | power_in | Positive (highest) power supply; 6V absolute maximum, which can permanently damage the amplifier, so keep within the 2V to 5.5V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Single supply voltage range | 2 | 5.5 | V | Single-supply operation, as printed | 2 | ||
| Absolute maximum supply voltage | 6 | V | High supply voltage can permanently damage the amplifier | 10 | |||
| Dual supply voltage range | 1 | 2.75 | V | Printed as ±1V to ±2.75V (dual supply) | 10 | ||
| Operating temperature range | -25 | 125 | ℃ | Specified operating range, as printed for OPA2376AIDR-MS (SOP-8) | 2 | ||
| Input offset voltage | 2 | μV | Typical, as printed in features | 2 | |||
| Quiescent current | 600 | μA | Vs=5V | 2 | |||
| Gain bandwidth | 6 | MHz | As printed in features | 2 | |||
| Slew rate | 5 | V/us | As printed in features | 2 | |||
| Input voltage noise density | 6 | nV/VHz | At 1kHz | 2 | |||
| Zero drift | 0.03 | μV/C | Typical, as printed in features | 2 |
CAD (KiCad official)
- Symbol:
OPA2376AIDR-MS - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
opa2376aidr-ms-etched.step/opa2376aidr-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2376aidr-ms.step/opa2376aidr-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (13 pp, sha256
fb8fe9079db0066c, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).