main
John Lauer
3D model from KiCad's own package generator at the datasheet's values: radiused gull-wing leads in matte tin, reviewed…
3c8e369
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166
{
"plan": {
"schema": "adom/mark-plan@1",
"mpn": "OPA2365AIDR",
"step": "/home/adom/project/kicad-gen/work/opa2365aidr/opa2365aidr.step",
"footprint": "/home/adom/project/kicad-gen/work/opa2365aidr/opa2365aidr.kicad_mod",
"standUp": [],
"standUpSource": "as-is (Z up)",
"inputs": {
"up": "auto",
"face": "auto",
"along": null,
"upSupplied": false,
"faceSupplied": false,
"faceSource": "inferred: top face"
},
"face": "top",
"pin1": {
"source": "footprint pad 1",
"xyMm": [
-2.475,
1.905
],
"corner": "left/lower"
},
"existingMarks": [],
"vendorMarking": {
"present": false,
"glyphFaces": 0
},
"faceNormal": [
0,
0,
1
],
"longAxis": {
"axis": "y",
"vector": [
0.0,
1.0,
0.0
],
"why": "two pin rows (4 + 4 pins, 4.95 mm apart): parallel to the pin rows (band 3.57 mm along, 3.54 mm across)",
"source": "pin-rows",
"override": null,
"pinRows": {
"axis": "y",
"pinsPerRow": [
4,
4
],
"rowSpacingMm": 4.95,
"exposed": 0
}
},
"readingDirection": {
"vector": [
-0.0,
-1.0,
0.0
],
"angleDeg": 270,
"textUp": [
1.0,
-0.0,
0.0
],
"rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
},
"band": {
"regionMm": [
-1.7705,
-2.2705,
1.7705,
1.3005
],
"zMm": 1.69,
"lengthMm": 3.571,
"heightMm": 3.541,
"why": "highest flat face over the body centre",
"terminationsExcludedBy": null,
"trimmedEnds": [],
"keepouts": [
[
-1.4205,
1.3205,
-0.8205,
1.9205
]
],
"sideTurn": null,
"margins": {
"lengthEachSide": 0.12,
"heightEachSide": 0.15
}
},
"text": {
"lines": [
"OPA2365",
"AIDR"
],
"chars": 11,
"capHeightMm": 0.4881,
"smallestLineMm": 0.4881,
"heightPctOfBand": 31.7,
"why": "two lines: the smaller line (0.488 mm) beats one line (0.307 mm) by 1.59x",
"alternative": {
"lines": [
"OPA2365AIDR"
],
"capHeightMm": 0.307,
"smallestLineMm": 0.307
},
"font": "service-step2glb /laser-etch (single-stroke outline font)"
},
"etch": {
"poseQuarterTurnsZ": 1,
"service": "/laser-etch?mode=flat",
"note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
},
"outline": {
"upAxis": "z",
"poseRotZDeg": 180,
"rot": 90,
"recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn OPA2365AIDR (stands the STEP up (as-is (Z up)), turns it 180 deg about Z and draws OPA2365 / AIDR on the planned band, rot 90)",
"why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
},
"widget": {
"px": 320,
"pxPerMm": 39.85,
"capHeightPx": 15.9
},
"hints": [],
"warnings": [],
"summary": "Mark along the 3.57 mm axis (-Y), 0.49 mm text (2 lines), upright with pin 1 left lower, outline rot 90 after a 180 deg pose turn; ~16 px caps at 320 px"
},
"etch": {
"out": "/home/adom/project/kicad-gen/work/opa2365aidr/opa2365aidr-etched.step",
"mpn": "OPA2365AIDR",
"lines": [
"O2365A"
],
"removedOldMarks": [],
"turns": [
{
"axis": "z",
"quarterTurns": 1
}
],
"serviceMarkTurnedQuarter": 0,
"line2Scaled": false,
"fit": {
"scale": 0.8727,
"capMm": 0.5658,
"markMm": [
2.714,
0.5715
],
"bandMm": [
3.571,
3.541
],
"zMm": 1.695
}
}
}