Generated by kicad-footprint-generator · KiCad file format 20260206
OPA2364IDGKR
Texas Instruments · Operational Amplifier · VSSOP-8
OPA2364IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of channel A. |
| 2 | -IN A | input | Inverting input of channel A, with input common-mode range extending from (V-) - 0.1 V to (V+) + 0.1 V. |
| 3 | +IN A | input | Noninverting input of channel A, with input common-mode range extending from (V-) - 0.1 V to (V+) + 0.1 V. |
| 4 | V- | power_in | Negative (lowest) power supply; the specified supply range is 1.8 V to 5.5 V as [V+] - [V-]. |
| 5 | +IN B | input | Noninverting input of channel B, with input common-mode range extending from (V-) - 0.1 V to (V+) + 0.1 V. |
| 6 | -IN B | input | Inverting input of channel B, with input common-mode range extending from (V-) - 0.1 V to (V+) + 0.1 V. |
| 7 | OUT B | output | Output of channel B. |
| 8 | V+ | power_in | Positive (highest) power supply; the absolute maximum supply voltage ([V+] - [V-]) is 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 900 | µV | 11 | |||
| Input offset voltage vs power supply | PSRR | 80 | 330 | µV/V | VS = 1.8 V to 5.5 V; VCM = (V-); TA = -40°C to +125°C | 11 | |
| Input bias current | IB | -10 | 1 | 10 | pA | TA = 25°C | 11 |
| Input offset current | IOS | -10 | 1 | 10 | pA | 11 | |
| Common-mode rejection ratio | CMRR | 74 | 90 | dB | (V−), 0.1 V < VCM < (V+) + 0.1 V; TA = -40°C to +125°C | 11 | |
| Open-loop voltage gain | AOL | 94 | 100 | dB | RL = 10 kΩ; 100 mV < VO < (V+), 100 mV; TA = 25°C | 11 | |
| Open-loop voltage gain | AOL | 86 | dB | RL = 10 kΩ; 100 mV < VO < (V+), 100 mV; VS = 1.8 V to 5.5 V; TA = -40°C to +125°C | 11 | ||
| Voltage output swing | 10 | 20 | mV | RL = 10 kΩ; TA = 25°C | 11 | ||
| Voltage output swing | 20 | mV | RL = 10 kΩ; TA = -40°C to +125°C | 11 | |||
| Specified voltage range | VS | 1.8 | 5.5 | V | 12 | ||
| Quiescent current (per amplifier) | IQ | 650 | 750 | µA | VS = 1.8 V; TA = -40°C to +125°C | 12 | |
| Quiescent current (per amplifier) | IQ | 850 | 1000 | µA | VS = 3.6 V; TA = -40°C to +125°C | 12 | |
| Quiescent current (per amplifier) | IQ | 1.1 | 1.4 | mA | VS = 5.5 V; TA = -40°C to +125°C | 12 | |
| Supply voltage | 1.8 | 5.5 | V | 8 | |||
| Operating temperature | TA | -40 | 125 | °C | 8 | ||
| Supply voltage ([V+], [V-]) | 0 | 5.5 | V | 8 | |||
| Signal input pin current | -10 | 10 | mA | 8 | |||
| Junction temperature | TJ | 150 | °C | 8 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 8 | ||
| Junction-to-ambient thermal resistance (DGK, VSSOP-8) | RθJA | 171.8 | °C/W | 10 | |||
| Junction-to-case (top) thermal resistance (DGK, VSSOP-8) | RθJC(top) | 63.2 | °C/W | 10 | |||
| Junction-to-board thermal resistance (DGK, VSSOP-8) | RθJB | 92.4 | °C/W | 10 | |||
| Junction-to-top characterization parameter (DGK, VSSOP-8) | ψJT | 9.5 | °C/W | 10 | |||
| Junction-to-board characterization parameter (DGK, VSSOP-8) | ψJB | 91 | °C/W | 10 |
CAD (KiCad official)
- Symbol:
OPA2364IDGKR - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa2364idgkr-etched.step/opa2364idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2364idgkr.step/opa2364idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (67 pp, sha256
d5e6d2f3a9400004, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).