OPA2363IDGSR

{
  "slug": "opa2363idgsr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Operational Amplifier, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "opa2363idgsr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "opa2363idgsr.kicad_sym",
    "opa2363idgsr.kicad_mod",
    "opa2363idgsr.glb",
    "opa2363idgsr.step",
    "opa2363idgsr.lbr",
    "docs/hero.png",
    "docs/opa2363idgsr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "opa2363idgsr-hero.glb",
    "opa2363idgsr-hero.overlay.json"
  ],
  "component": {
    "mpn": "OPA2363IDGSR",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-10-0.5mm",
    "pin_count": 10,
    "category": "Amplifiers/Comparators",
    "subcategory": "Operational Amplifier",
    "datasheet": "https://www.ti.com/cn/lit/gpn/opa2363",
    "parts": {
      "symbol": "opa2363idgsr.kicad_sym",
      "footprint": "opa2363idgsr.kicad_mod",
      "model_3d": "opa2363idgsr-hero.glb",
      "model_3d_plain": "opa2363idgsr.glb",
      "model_3d_step": "opa2363idgsr-etched.step",
      "model_3d_step_plain": "opa2363idgsr.step",
      "lbr": "opa2363idgsr.lbr"
    },
    "distributor_links": {
      "lcsc": "C181294",
      "digikey": "296-29413-2-ND",
      "mouser": "595-OPA2363IDGSR"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T16:04:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-29413-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-OPA2363IDGSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT A",
        "type": "output",
        "description": "Output of amplifier channel A."
      },
      {
        "number": "2",
        "name": "-IN A",
        "type": "input",
        "description": "Inverting input of channel A."
      },
      {
        "number": "3",
        "name": "+IN A",
        "type": "input",
        "description": "Non-inverting input of channel A."
      },
      {
        "number": "4",
        "name": "V-",
        "type": "power_in",
        "description": "Negative power supply, the lowest potential in the circuit."
      },
      {
        "number": "5",
        "name": "Enable A",
        "type": "input",
        "description": "Enable input for amplifier A; a logic high enables the amplifier and a logic low disables it, and the pin must not be left floating."
      },
      {
        "number": "6",
        "name": "Enable B",
        "type": "input",
        "description": "Enable input for amplifier B; a logic high enables the amplifier and a logic low disables it, and the pin must not be left floating."
      },
      {
        "number": "7",
        "name": "+IN B",
        "type": "input",
        "description": "Non-inverting input of channel B."
      },
      {
        "number": "8",
        "name": "-IN B",
        "type": "input",
        "description": "Inverting input of channel B."
      },
      {
        "number": "9",
        "name": "OUT B",
        "type": "output",
        "description": "Output of amplifier channel B."
      },
      {
        "number": "10",
        "name": "V+",
        "type": "power_in",
        "description": "Positive power supply, the highest potential in the circuit."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The DGS pinout is printed as '10 引脚 MSOP' on page 5 of the datasheet; the orderable addendum (page 2; The enable-pin logic thresholds (high above 75% of V+, low within 0.8 V of V-, and the 20 µs enable ; The datasheet's pin table gives no NC pins for the DGS package (NC pins 1, 2, 3, 4, 9, 12 apply only"
        ],
        "pages_sent": 27,
        "cost_usd": 0.1288,
        "at": "2026-10-10T16:04:26"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/opa2363",
        "pages": 65,
        "sha256": "78a564cc6571e3d7",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "opa2363idgsr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "opa2363idgsr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f52c0f30ccd2c7865e40a70a941b0733750cfd9349af2cc66f57c58f75f4065c",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}