main
History Download
Ray Publish 0.1.0 b6c4adc

OPA2354AIDGKT

Texas Instruments · Operational Amplifier · VSSOP-8

OPA2354AIDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of channel A; the datasheet specifies output current of 100 mA for single, dual and quad versions at 5 V supply.
2 -IN A input Inverting input of channel A; the common-mode input range extends from (V-) - 0.1 V to (V+) + 0.1 V.
3 +IN A input Noninverting input of channel A; the common-mode input range extends from (V-) - 0.1 V to (V+) + 0.1 V.
4 V- power_in Negative (lowest) supply; recommended supply range is 2.5 V to 5.5V with VS = (V+) - (V-), and the absolute maximum supply voltage is 7.5 V.
5 +IN B input Noninverting input of channel B; the common-mode input range extends from (V-) - 0.1 V to (V+) + 0.1 V.
6 -IN B input Inverting input of channel B; the common-mode input range extends from (V-) - 0.1 V to (V+) + 0.1 V.
7 OUT B output Output of channel B; the datasheet specifies output current of 100 mA for single, dual and quad versions at 5 V supply.
8 V+ power_in Positive (highest) supply; recommended supply range is 2.5 V to 5.5 V with VS = (V+) - (V-), and the absolute maximum supply voltage is 7.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VS = (V+), (V-) VS 7.5 V 5
Signal input terminals current II -10 10 mA 5
Operating temperature TA -55 125 °C 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage, VS = (V+), (V-) VS 2.5 5.5 V 5
Specified temperature TA -40 25 125 °C 5
Input offset voltage VOS -8 2 8 mV VS = 5V, TA = 25°C 7
Input offset voltage over temperature VOS -10 10 mV VS = 5V, TA = -40°C to +125°C 7
Power-supply rejection ratio PSRR -800 200 800 µV/V VS = 2.7V to 5.5V, VCM = (VS / 2), 0.55V 7
Power-supply rejection ratio over temperature PSRR -900 900 µV/V VS = 2.7V to 5.5V, VCM = (VS / 2), 0.55V, TA = -40°C to +125°C 7
Input bias current IB -50 3 50 pA 7
Input offset current IOS -50 1 50 pA 7
Common-mode rejection ratio CMRR 66 80 dB VS = 5.5V, -0.1V < VCM < 3.5V, TA = 25°C 7
Common-mode rejection ratio over temperature CMRR 64 dB VS = 5.5V, -0.1V < VCM < 3.5V, TA = -40°C to +125°C 7
Common-mode rejection ratio CMRR 56 68 dB VS = 5.5V, -0.1V < VCM < 5.6V, TA = 25°C 7
Common-mode rejection ratio over temperature CMRR 55 dB VS = 5.5V, -0.1V < VCM < 5.6V, TA = -40°C to +125°C 7
Open-loop gain AOL 94 110 dB VS = 5.5V, 0.3V < VO < 4.7V, TA = 25°C 7
Open-loop gain over temperature AOL 90 dB VS = 5.5V, 0.4V < VO < 4.6V, TA = -40 to +125°C 7
Output voltage swing from supply rails 0.1 0.3 V VS = 5V, AOL > 94dB 8
Output voltage swing from supply rails over temperature 0.4 V VS = 5V, RL = 1kΩ, AOL > 90dB, TA = -40°C to +125°C 8
Quiescent current (per amplifier) IQ 4.9 6 mA TA = 25°C, VS = 5V (enabled), IO = 0A, for OPA2354, OPA4354 8
Quiescent current (per amplifier) over temperature IQ 7.5 mA TA = -40°C to +125°C, for OPA2354, OPA4354 8
Junction-to-ambient thermal resistance (DGK) RθJA 150 °C/W 6
Junction-to-case (top) thermal resistance (DGK) RθJC(top) 68.2 °C/W 6
Junction-to-board thermal resistance (DGK) RθJB 87 °C/W 6
Junction-to-top characterization parameter (DGK) ψJT 9.4 °C/W 6
Junction-to-board characterization parameter (DGK) ψJB 86.3 °C/W 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper ground planes, short and direct signal traces, and a suitable bypass capacitor located at the V+ pin provide clean, stable operation. Large areas of copper provides a means of dissipating heat that is 22

CAD (KiCad official)

  • Symbol: OPA2354AIDGKT
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa2354aidgkt-etched.step / opa2354aidgkt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2354aidgkt.step / opa2354aidgkt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 21c2d9f67869aa77, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF