3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA2348AIDGKR
Texas Instruments · Operational Amplifier · VSSOP-8
OPA2348AIDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of operational amplifier channel A; can swing rail-to-rail from V- to V+ within 25 mV at RL = 100 kΩ. |
| 2 | -IN A | input | Inverting input of operational amplifier channel A; accepts input signals in common-mode range (V-) - 0.2 V to (V+) + 0.2 V. |
| 3 | +IN A | input | Non-inverting input of operational amplifier channel A; accepts input signals in common-mode range (V-) - 0.2 V to (V+) + 0.2 V. |
| 4 | V- | power_in | Negative supply rail; must be 0 V for single-supply operation with V+ from 2.1 V to 5.5 V. |
| 5 | +IN B | input | Non-inverting input of operational amplifier channel B; accepts input signals in common-mode range (V-) - 0.2 V to (V+) + 0.2 V. |
| 6 | -IN B | input | Inverting input of operational amplifier channel B; accepts input signals in common-mode range (V-) - 0.2 V to (V+) + 0.2 V. |
| 7 | OUT B | output | Output of operational amplifier channel B; can swing rail-to-rail from V- to V+ within 25 mV at RL = 100 kΩ. |
| 8 | V+ | power_in | Positive supply rail; operates from 2.1 V to 5.5 V for single-supply low-power CMOS operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VS | 7.5 | V | 6 | |||
| Signal input terminals current | 10 | mA | 6 | ||||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Operating temperature (ambient) | TA | -65 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Supply voltage (recommended) | 2.1 | 5.5 | V | 6 | |||
| Rated temperature range | -40 | 125 | °C | 6 | |||
| Input offset voltage | VOS | 1 | 5 | mV | VS = 5V, VCM = (V–) + 0.8V | 7 | |
| Input offset voltage over temperature | VOS | 6 | mV | VS = 5V, VCM = (V–) + 0.8V, TA = –40°C to 125°C | 7 | ||
| Power supply rejection ratio | PSRR | 60 | 175 | µV/V | VS = 2.5V to 5.5V, VCM < (V+) – 1.7V | 7 | |
| Power supply rejection ratio over temperature | PSRR | 300 | µV/V | TA = –40°C to 125°C, VS = 2.5V to 5.5V, VCM < (V+) – 1.7V | 7 | ||
| Common-mode rejection ratio | CMRR | 70 | 82 | dB | (V–) – 0.2V < VCM < (V+) – 1.7V | 8 | |
| Common-mode rejection ratio over temperature | CMRR | 66 | dB | (V–) < VCM < (V+) – 1.7V, TA = –40°C to 125°C | 8 | ||
| Common-mode rejection ratio, VS = 5.5V | CMRR | 60 | 71 | dB | VS = 5.5V, (V–) – 0.2V < VCM < (V+) + 0.2V | 8 | |
| Common-mode rejection ratio, VS = 5.5V, over temperature | CMRR | 56 | dB | VS = 5.5V, (V–) < VCM < (V+), TA = –40°C to 125°C | 8 | ||
| Input bias current | IB | -10 | 0.5 | 10 | pA | 8 | |
| Input offset current | IOS | -10 | 0.5 | 10 | pA | 8 | |
| Open-loop voltage gain | AOL | 94 | 108 | dB | VS = 5V, RL = 100kΩ, 0.025V < VO < 4.975V | 8 | |
| Open-loop voltage gain over temperature | AOL | 90 | dB | VS = 5V, RL = 100kΩ, 0.025V < VO < 4.975V, TA = –40°C to 125°C | 8 | ||
| Open-loop voltage gain, RL = 5kΩ | AOL | 90 | 98 | dB | VS = 5V, RL = 5kΩ, 0.125V < VO < 4.875V | 8 | |
| Open-loop voltage gain, RL = 5kΩ, over temperature | AOL | 88 | dB | VS = 5V, RL = 5kΩ, 0.125V < VO < 4.875V, TA = –40°C to 125°C | 8 | ||
| Output voltage swing from supply rail | 18 | 25 | mV | RL = 100kΩ, AOL > 94dB | 8 | ||
| Output voltage swing from supply rail, over temperature | 25 | mV | RL = 100kΩ, AOL > 90dB, TA = –40°C to 125°C | 8 | |||
| Output voltage swing from supply rail, RL = 5kΩ | 100 | 125 | mV | RL = 5kΩ, AOL > 90dB | 8 | ||
| Output voltage swing from supply rail, RL = 5kΩ, over temperature | 125 | mV | RL = 5kΩ, AOL > 88dB, TA = –40°C to 125°C | 8 | |||
| Short-circuit current | ISC | -10 | 10 | mA | 8 | ||
| Rated supply voltage | VS | 2.5 | 5.5 | V | 8 | ||
| Operating supply voltage | 2.1 | 5.5 | V | 8 | |||
| Quiescent current per amplifier | IQ | 45 | 65 | µA | IO = 0mA | 8 | |
| Quiescent current per amplifier over temperature | IQ | 75 | µA | IO = 0mA, TA = –40°C to 125°C | 8 | ||
| Junction-to-ambient thermal resistance (DGK, VSSOP-8) | RθJA | 191 | °C/W | DGK (VSSOP) 8-pin package | 7 | ||
| Junction-to-case (top) thermal resistance (DGK, VSSOP-8) | RθJC(top) | 83 | °C/W | DGK (VSSOP) 8-pin package | 7 | ||
| Junction-to-board thermal resistance (DGK, VSSOP-8) | RθJB | 112 | °C/W | DGK (VSSOP) 8-pin package | 7 | ||
| Junction-to-top characterization parameter (DGK, VSSOP-8) | ψJT | 18 | °C/W | DGK (VSSOP) 8-pin package | 7 | ||
| Junction-to-board characterization parameter (DGK, VSSOP-8) | ψJB | 110 | °C/W | DGK (VSSOP) 8-pin package | 7 |
CAD (KiCad official)
- Symbol:
OPA2348AIDGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
opa2348aidgkr-etched.step/opa2348aidgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2348aidgkr.step/opa2348aidgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
14c02678dcd3424f, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).