main
Ray
Publish 0.1.0
922adc5
OPA2345EA
Texas Instruments · Operational Amplifier · VSSOP-8
OPA2345EA from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Output of amplifier A, which swings within 1 mV of the supply rails at light loads (>50kΩ) and has ±15 mA short-circuit current. |
| 2 | -In A | input | Inverting input of amplifier A; the common-mode voltage range extends from -0.3 V to 0.3 V beyond the supplies, and input signals more than 0.5 V beyond the rails should be limited to 10 mA. |
| 3 | +In A | input | Non-inverting input of amplifier A with a common-mode range of -0.3 V to (V+) + 0.3 V; a Schottky clamp is required if the input can go more than 0.3 V below ground. |
| 4 | V- | power_in | Negative power supply, which is ground in single-supply operation; the device is specified for a total supply of 2.7 V to 5.5 V. |
| 5 | +In B | input | Non-inverting input of amplifier B with a common-mode range of -0.3 V to (V+) + 0.3 V. |
| 6 | -In B | input | Inverting input of amplifier B with a common-mode range of -0.3 V to (V+) + 0.3 V; input signals more than 0.5 V beyond the rails should be limited to 10 mA. |
| 7 | Out B | output | Output of amplifier B, which swings within 1 mV of the supply rails at light loads (>50kΩ) and has ±15 mA short-circuit current. |
| 8 | V+ | power_in | Positive power supply; the device is specified for 2.7 V to 5.5 V with an absolute maximum total supply of 7.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -1 | 0.2 | 1 | mV | VS = +5.5V, VCM = VS/2 | 3 |
| Input Offset Voltage (over temperature) | VOS | -1.2 | 0.8 | 1.2 | mV | Over Temperature | 3 |
| Input Bias Current | IB | -10 | 0.2 | 10 | pA | 3 | |
| Input Offset Current | IOS | -10 | 0.2 | 10 | pA | 3 | |
| Power Supply Rejection Ratio | PSRR | 30 | 200 | µV/V | VS = 2.7V to 5.5V, VCM < (V+) -1.8V | 3 | |
| Power Supply Rejection Ratio (over temperature) | PSRR | 250 | µV/V | VS = 2.7V to 5.5V, VCM < (V+) -1.8V | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 76 | 92 | dB | VS = +5.5V, -0.3V < VCM < (V+)-1.8 | 3 | |
| Common-Mode Rejection Ratio (over temperature) | CMRR | 74 | dB | VS = +5.5V, -0.3V < VCM < (V+)-1.8 | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 70 | 84 | dB | VS = +5.5V, -0.3V < VCM < 5.8V | 3 | |
| Common-Mode Rejection Ratio (over temperature) | CMRR | 68 | dB | VS = +5.5V, -0.3V < VCM < 5.8V | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 66 | 80 | dB | VS = +2.7V, -0.3V < VCM < 3V | 3 | |
| Common-Mode Rejection Ratio (over temperature) | CMRR | 64 | dB | VS = +2.7V, -0.3V < VCM < 3V | 3 | ||
| Open-Loop Voltage Gain | AOL | 104 | 122 | dB | RL = 100kΩ, 10mV < VO < (V+) -10mV | 3 | |
| Open-Loop Voltage Gain (over temperature) | AOL | 100 | dB | RL = 100kΩ, 10mV < VO < (V+) -10mV | 3 | ||
| Open-Loop Voltage Gain | AOL | 96 | 120 | dB | RL = 5kΩ, 400mV < VO < (V+) -400mV | 3 | |
| Open-Loop Voltage Gain (over temperature) | AOL | 90 | dB | RL = 5kΩ, 400mV < VO < (V+) -400mV | 3 | ||
| Voltage Output Swing from Rail | 3 | 10 | mV | RL = 100kΩ, AOL ≥ 104dB | 3 | ||
| Voltage Output Swing from Rail (over temperature) | 10 | mV | RL = 100kΩ, AOL ≥ 100dB | 3 | |||
| Voltage Output Swing from Rail | 40 | 400 | mV | RL = 5kΩ, AOL ≥ 96dB | 3 | ||
| Voltage Output Swing from Rail (over temperature) | 400 | mV | RL = 5kΩ, AOL ≥ 90dB | 3 | |||
| Short-Circuit Current | ISC | -15 | 15 | mA | 3 | ||
| Common-Mode Voltage Range | VCM | -0.3 | V | 3 | |||
| Specified Voltage Range | VS | 2.7 | 5.5 | V | 3 | ||
| Operating Voltage Range | 2.5 | 5.5 | V | 3 | |||
| Quiescent Current (per amplifier) | IQ | 150 | 250 | µA | VS = 5.5V, IO = 0 | 3 | |
| Quiescent Current (over temperature) | IQ | 300 | µA | Over Temperature | 3 | ||
| Specified Range | -40 | 85 | °C | 3 | |||
| Operating Range | -55 | 125 | °C | 3 | |||
| Supply Voltage (V+ to V-) | 7.5 | V | 4 | ||||
| Input Current | 10 | mA | Input terminals (see note 2) | 4 | |||
| Operating Temperature | -55 | 125 | °C | 4 | |||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Junction Temperature | 150 | °C | 4 | ||||
| Lead Temperature (soldering) | 300 | °C | soldering, 10s | 4 | |||
| ESD Tolerance | 4000 | V | Human Body Model | 4 | |||
| Thermal Resistance, junction-to-ambient | θJA | 150 | °C/W | MSOP-8 Surface Mount | 3 |
CAD (KiCad official)
- Symbol:
OPA2345EA - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa2345ea-250-etched.step/opa2345ea-250-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2345ea-250.step/opa2345ea-250.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
91df469ae7c9a621, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA2345EA
**Texas Instruments** · Operational Amplifier · VSSOP-8
OPA2345EA from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Output of amplifier A, which swings within 1 mV of the supply rails at light loads (>50kΩ) and has ±15 mA short-circuit current. |
| 2 | -In A | input | Inverting input of amplifier A; the common-mode voltage range extends from -0.3 V to 0.3 V beyond the supplies, and input signals more than 0.5 V beyond the rails should be limited to 10 mA. |
| 3 | +In A | input | Non-inverting input of amplifier A with a common-mode range of -0.3 V to (V+) + 0.3 V; a Schottky clamp is required if the input can go more than 0.3 V below ground. |
| 4 | V- | power_in | Negative power supply, which is ground in single-supply operation; the device is specified for a total supply of 2.7 V to 5.5 V. |
| 5 | +In B | input | Non-inverting input of amplifier B with a common-mode range of -0.3 V to (V+) + 0.3 V. |
| 6 | -In B | input | Inverting input of amplifier B with a common-mode range of -0.3 V to (V+) + 0.3 V; input signals more than 0.5 V beyond the rails should be limited to 10 mA. |
| 7 | Out B | output | Output of amplifier B, which swings within 1 mV of the supply rails at light loads (>50kΩ) and has ±15 mA short-circuit current. |
| 8 | V+ | power_in | Positive power supply; the device is specified for 2.7 V to 5.5 V with an absolute maximum total supply of 7.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -1 | 0.2 | 1 | mV | VS = +5.5V, VCM = VS/2 | 3 |
| Input Offset Voltage (over temperature) | VOS | -1.2 | 0.8 | 1.2 | mV | Over Temperature | 3 |
| Input Bias Current | IB | -10 | 0.2 | 10 | pA | | 3 |
| Input Offset Current | IOS | -10 | 0.2 | 10 | pA | | 3 |
| Power Supply Rejection Ratio | PSRR | | 30 | 200 | µV/V | VS = 2.7V to 5.5V, VCM < (V+) -1.8V | 3 |
| Power Supply Rejection Ratio (over temperature) | PSRR | | | 250 | µV/V | VS = 2.7V to 5.5V, VCM < (V+) -1.8V | 3 |
| Common-Mode Rejection Ratio | CMRR | 76 | 92 | | dB | VS = +5.5V, -0.3V < VCM < (V+)-1.8 | 3 |
| Common-Mode Rejection Ratio (over temperature) | CMRR | 74 | | | dB | VS = +5.5V, -0.3V < VCM < (V+)-1.8 | 3 |
| Common-Mode Rejection Ratio | CMRR | 70 | 84 | | dB | VS = +5.5V, -0.3V < VCM < 5.8V | 3 |
| Common-Mode Rejection Ratio (over temperature) | CMRR | 68 | | | dB | VS = +5.5V, -0.3V < VCM < 5.8V | 3 |
| Common-Mode Rejection Ratio | CMRR | 66 | 80 | | dB | VS = +2.7V, -0.3V < VCM < 3V | 3 |
| Common-Mode Rejection Ratio (over temperature) | CMRR | 64 | | | dB | VS = +2.7V, -0.3V < VCM < 3V | 3 |
| Open-Loop Voltage Gain | AOL | 104 | 122 | | dB | RL = 100kΩ, 10mV < VO < (V+) -10mV | 3 |
| Open-Loop Voltage Gain (over temperature) | AOL | 100 | | | dB | RL = 100kΩ, 10mV < VO < (V+) -10mV | 3 |
| Open-Loop Voltage Gain | AOL | 96 | 120 | | dB | RL = 5kΩ, 400mV < VO < (V+) -400mV | 3 |
| Open-Loop Voltage Gain (over temperature) | AOL | 90 | | | dB | RL = 5kΩ, 400mV < VO < (V+) -400mV | 3 |
| Voltage Output Swing from Rail | | | 3 | 10 | mV | RL = 100kΩ, AOL ≥ 104dB | 3 |
| Voltage Output Swing from Rail (over temperature) | | | | 10 | mV | RL = 100kΩ, AOL ≥ 100dB | 3 |
| Voltage Output Swing from Rail | | | 40 | 400 | mV | RL = 5kΩ, AOL ≥ 96dB | 3 |
| Voltage Output Swing from Rail (over temperature) | | | | 400 | mV | RL = 5kΩ, AOL ≥ 90dB | 3 |
| Short-Circuit Current | ISC | -15 | | 15 | mA | | 3 |
| Common-Mode Voltage Range | VCM | -0.3 | | | V | | 3 |
| Specified Voltage Range | VS | 2.7 | | 5.5 | V | | 3 |
| Operating Voltage Range | | 2.5 | | 5.5 | V | | 3 |
| Quiescent Current (per amplifier) | IQ | | 150 | 250 | µA | VS = 5.5V, IO = 0 | 3 |
| Quiescent Current (over temperature) | IQ | | | 300 | µA | Over Temperature | 3 |
| Specified Range | | -40 | | 85 | °C | | 3 |
| Operating Range | | -55 | | 125 | °C | | 3 |
| Supply Voltage (V+ to V-) | | | | 7.5 | V | | 4 |
| Input Current | | | | 10 | mA | Input terminals (see note 2) | 4 |
| Operating Temperature | | -55 | | 125 | °C | | 4 |
| Storage Temperature | | -65 | | 150 | °C | | 4 |
| Junction Temperature | | | | 150 | °C | | 4 |
| Lead Temperature (soldering) | | | | 300 | °C | soldering, 10s | 4 |
| ESD Tolerance | | | | 4000 | V | Human Body Model | 4 |
| Thermal Resistance, junction-to-ambient | θJA | | 150 | | °C/W | MSOP-8 Surface Mount | 3 |
## CAD (KiCad official)
- Symbol: `OPA2345EA`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `opa2345ea-250-etched.step` / `opa2345ea-250-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa2345ea-250.step` / `opa2345ea-250.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa2345.pdf) (35 pp, sha256 `91df469ae7c9a621`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa2345ea-250-datasheet.pdf)