3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗README
markdownOPA2345EA
The maker sells this part only as OPA2345EA/250, OPA2345EA/2K5 (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.4: "Models with a slash (/) are available only in Tape and Reel")). The DigiKey and Mouser numbers on this page are for OPA2345EA/250.
Texas Instruments · Operational Amplifier · VSSOP-8
OPA2345EA from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Amplifier A output, rail-to-rail swinging within 1mV of the supply rails (RL = 100kΩ), with short-circuit current of ±15mA. |
| 2 | -In A | input | Amplifier A inverting input, with common-mode range of -0.3V to (V+) + 0.3V and diode-clamped to the supply rails (limit input current to 10mA). |
| 3 | +In A | input | Amplifier A non-inverting input, with common-mode range of -0.3V to (V+) + 0.3V and diode-clamped to the supply rails (limit input current to 10mA). |
| 4 | V- | power_in | Negative supply (ground in single-supply use); the V+ to V- supply is 2.5V to 5.5V operating and 7.5V absolute maximum. |
| 5 | +In B | input | Amplifier B non-inverting input, with common-mode range of -0.3V to (V+) + 0.3V and diode-clamped to the supply rails (limit input current to 10mA). |
| 6 | -In B | input | Amplifier B inverting input, with common-mode range of -0.3V to (V+) + 0.3V and diode-clamped to the supply rails (limit input current to 10mA). |
| 7 | Out B | output | Amplifier B output, rail-to-rail swinging within 1mV of the supply rails (RL = 100kΩ), with short-circuit current of ±15mA. |
| 8 | V+ | power_in | Positive supply; operating range 2.5V to 5.5V (specified 2.7V to 5.5V), 7.5V absolute maximum between V+ and V-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -1 | 0.2 | 1 | mV | VS = +5.5V, VCM = VS/2 | 3 |
| Input Offset Voltage over temperature | VOS | -1.2 | 0.8 | 1.2 | mV | Over temperature | 3 |
| Offset voltage vs temperature | dVOS/dT | -3 | 3 | µV/°C | 3 | ||
| Power supply rejection ratio | PSRR | 30 | 200 | µV/V | VS = 2.7V to 5.5V, VCM < (V+) -1.8V | 3 | |
| Power supply rejection ratio over temperature | PSRR | 250 | µV/V | Over temperature, VS = 2.7V to 5.5V, VCM < (V+) -1.8V | 3 | ||
| Input Bias Current | IB | -10 | 0.2 | 10 | pA | 3 | |
| Input Offset Current | IOS | -10 | 0.2 | 10 | pA | 3 | |
| Common-Mode Voltage Range | VCM | -0.3 | V | Upper limit printed as (V+) + 0.3 V | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 76 | 92 | dB | VS = +5.5V, -0.3V < VCM < (V+)-1.8 | 3 | |
| Common-Mode Rejection Ratio over temperature | CMRR | 74 | dB | Over temperature, VS = +5.5V, -0.3V < VCM < (V+)-1.8 | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 70 | 84 | dB | VS = +5.5V, -0.3V < VCM < 5.8V | 3 | |
| Common-Mode Rejection Ratio over temperature | CMRR | 68 | dB | Over temperature, VS = +5.5V, -0.3V < VCM < 5.8V | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 66 | 80 | dB | VS = +2.7V, -0.3V < VCM < 3V | 3 | |
| Common-Mode Rejection Ratio over temperature | CMRR | 64 | dB | Over temperature, VS = +2.7V, -0.3V < VCM < 3V | 3 | ||
| Open-Loop Voltage Gain | AOL | 104 | 122 | dB | RL = 100kΩ, 10mV < VO < (V+) -10mV | 3 | |
| Open-Loop Voltage Gain over temperature | AOL | 100 | dB | Over temperature, RL = 100kΩ, 10mV < VO < (V+) -10mV | 3 | ||
| Open-Loop Voltage Gain | AOL | 96 | 120 | dB | RL = 5kΩ, 400mV < VO < (V+) -400mV | 3 | |
| Open-Loop Voltage Gain over temperature | AOL | 90 | dB | Over temperature, RL = 5kΩ, 400mV < VO < (V+) -400mV | 3 | ||
| Voltage Output Swing from Rail | 1 | mV | RL = 100kΩ, AOL ≥ 96dB | 3 | |||
| Voltage Output Swing from Rail | 3 | 10 | mV | RL = 100kΩ, AOL ≥ 104dB | 3 | ||
| Voltage Output Swing from Rail over temperature | 10 | mV | Over temperature, RL = 100kΩ, AOL ≥ 100dB | 3 | |||
| Voltage Output Swing from Rail | 40 | 400 | mV | RL = 5kΩ, AOL ≥ 96dB | 3 | ||
| Voltage Output Swing from Rail over temperature | 400 | mV | Over temperature, RL = 5kΩ, AOL ≥ 90dB | 3 | |||
| Short-Circuit Current | ISC | -15 | 15 | mA | 3 | ||
| Quiescent Current (per amplifier) | IQ | 150 | 250 | µA | VS = 5.5V, IO = 0 | 3 | |
| Quiescent Current (per amplifier) over temperature | IQ | 300 | µA | Over temperature | 3 | ||
| Specified Voltage Range | VS | 2.7 | 5.5 | V | 3 | ||
| Operating Voltage Range | 2.5 | 5.5 | V | 3 | |||
| Specified Temperature Range | -40 | 85 | °C | 3 | |||
| Supply Voltage, V+ to V- | 7.5 | V | 4 | ||||
| Signal Input Terminals Current | 10 | mA | Signal input terminals, current | 4 | |||
| Operating Temperature | -55 | 125 | °C | 4 | |||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Junction Temperature | 150 | °C | 4 | ||||
| Lead Temperature | 300 | °C | Soldering, 10s | 4 | |||
| Thermal Resistance θJA, MSOP-8 surface mount | θJA | 150 | °C/W | MSOP-8 Surface Mount | 3 |
CAD (KiCad official)
- Symbol:
OPA2345EA - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa2345ea-etched.step/opa2345ea-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2345ea.step/opa2345ea.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
91df469ae7c9a621, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).