main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs opa2340ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
opa2340ua-etched.fit.json opa2340ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
opa2340ua-etched.glb opa2340ua: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
opa2340ua-etched.step opa2340ua: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
opa2340ua.glb Publish 0.1.0 · Ray
opa2340ua.kicad_mod Publish 0.1.0 · Ray
opa2340ua.kicad_sym Publish 0.1.0 · Ray
opa2340ua.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
opa2340ua.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json opa2340ua: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
README.md opa2340ua: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

OPA2340UA

UMW · Operational Amplifier · SOP-8

OPA2340UA from UMW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Output of amplifier channel A. Rail-to-rail output stage, swings to within 1 mV of V+ and V- with a 100 kΩ load.
2 -INA input Inverting (negative) input of amplifier channel A. Rail-to-rail input, common-mode range extends 500 mV beyond V- and V+.
3 +INA input Noninverting (positive) input of amplifier channel A. Rail-to-rail input, common-mode range extends 500 mV beyond V- and V+.
4 V- power_in Negative (lowest) power supply. Typically GND in single-supply operation; supports supplies as low as 2.5 V total (V+ - V-).
5 +INB input Noninverting (positive) input of amplifier channel B. Rail-to-rail input, common-mode range extends 500 mV beyond V- and V+.
6 -INB input Inverting (negative) input of amplifier channel B. Rail-to-rail input, common-mode range extends 500 mV beyond V- and V+.
7 OUTB output Output of amplifier channel B. Rail-to-rail output stage, swings to within 1 mV of V+ and V- with a 100 kΩ load.
8 V+ power_in Positive (highest) power supply. Single-supply operation from 2.5 V to 5.5 V (V+ referenced to V-). Bypass with 0.1 µF close to the pin.

Key specifications

Parameter Value
Manufacturer UMW
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • OPA2340UA

CAD (KiCad official)

  • Symbol: OPA2340UA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: opa2340ua-etched.step / opa2340ua-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2340ua.step / opa2340ua.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
opa2340ua.step 122 KB You want the bare part, or you mark your own boards.
opa2340ua-etched.step 2.0 MB You want the part with OPA2340UA already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 495 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (18 pp, sha256 e75e687924f6aa75, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF