3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA2336UA
Texas Instruments · Operational Amplifier · SOIC-8
OPA2336UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Amplifier A output, rail-to-rail swinging within 3mV of the supplies with a 100kΩ load, with ±5mA short-circuit current. |
| 2 | -In A | input | Amplifier A inverting input, common-mode range -0.2V to (V+)-1V and diode-clamped to the rails (limit input current to 10mA). |
| 3 | +In A | input | Amplifier A non-inverting input, common-mode range -0.2V to (V+)-1V and diode-clamped to the rails (limit input current to 10mA). |
| 4 | V- | power_in | Negative supply (ground in single-supply use); the input common-mode range extends to this rail. |
| 5 | +In B | input | Amplifier B non-inverting input, common-mode range -0.2V to (V+)-1V and diode-clamped to the rails (limit input current to 10mA). |
| 6 | -In B | input | Amplifier B inverting input, common-mode range -0.2V to (V+)-1V and diode-clamped to the rails (limit input current to 10mA). |
| 7 | Out B | output | Amplifier B output, rail-to-rail swinging within 3mV of the supplies with a 100kΩ load, with ±5mA short-circuit current. |
| 8 | V+ | power_in | Positive supply, specified from 2.3V to 5.5V (minimum operating 2.1V, absolute maximum 7.5V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | 7.5 | V | 2 | ||||
| Current at signal input terminals | 10 | mA | Input terminals; inputs beyond supply rails by more than 0.3V | 2 | |||
| Operating Temperature | -55 | 125 | °C | 2 | |||
| Storage Temperature | -55 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature | 300 | °C | Soldering, 10s | 2 | |||
| ESD Rating Human Body Model (HBM) | HBM | 500 | V | Human Body Model | 2 | ||
| ESD Rating Machine Model (MM) | MM | 100 | V | Machine Model | 2 | ||
| Specified Temperature Range | -40 | 85 | °C | Specified range | 3 | ||
| Operating Range | -55 | 125 | °C | Operating range | 3 | ||
| Storage Range | -55 | 125 | °C | Storage range | 3 | ||
| Specified Voltage Range | VS | 2.3 | 5.5 | V | 3 | ||
| Minimum Operating Voltage | 2.1 | V | 3 | ||||
| Input Offset Voltage | VOS | -125 | 60 | 125 | µV | 3 | |
| Offset Voltage vs Temperature | dVOS/dT | -1.5 | 1.5 | 1.5 | µV/°C | 3 | |
| Offset Voltage vs Power Supply (PSRR) | PSRR | 25 | 100 | µV/V | VS = 2.3V to 5.5V | 3 | |
| Offset Voltage Over Temperature vs Power Supply | PSRR | 130 | µV/V | VS = 2.3V to 5.5V, over temperature | 3 | ||
| Channel Separation, dc | 0.1 | µV/V | 3 | ||||
| Input Bias Current | IB | -10 | 1 | 10 | pA | 3 | |
| Input Bias Current Over Temperature | IB | -60 | 60 | pA | Over temperature | 3 | |
| Input Offset Current | IOS | -10 | 1 | 10 | pA | 3 | |
| Input Voltage Noise | 3 | µVp-p | f = 0.1 to 10Hz | 3 | |||
| Input Voltage Noise Density | en | 40 | nV/√Hz | f = 1kHz | 3 | ||
| Current Noise Density | in | 30 | fA/√Hz | f = 1kHz | 3 | ||
| Common-Mode Voltage Range | VCM | -0.2 | V | Upper limit printed as (V+) – 1V (not a number) | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 80 | 90 | dB | –0.2V < VCM < (V+) –1V | 3 | |
| Open-Loop Voltage Gain | AOL | 100 | 115 | dB | RL = 25kΩ, 100mV < VO < (V+) – 100mV | 3 | |
| Open-Loop Voltage Gain | AOL | 90 | 106 | dB | RL = 5kΩ, 500mV < VO < (V+) – 500mV | 3 | |
| Gain-Bandwidth Product | GBW | 100 | kHz | VS = 5V, G = 1 | 3 | ||
| Slew Rate | SR | 0.03 | V/µs | VS = 5V, G = 1 | 3 | ||
| Overload Recovery Time | 100 | µs | VIN • G = VS | 3 | |||
| Voltage Output Swing from Rail | 3 | mV | RL = 100kΩ, AOL ≥ 70dB | 3 | |||
| Voltage Output Swing from Rail | 20 | 100 | mV | RL = 25kΩ, AOL ≥ 90dB | 3 | ||
| Voltage Output Swing from Rail Over Temperature | 100 | mV | RL = 25kΩ, AOL ≥ 90dB, over temperature | 3 | |||
| Voltage Output Swing from Rail | 70 | 500 | mV | RL = 5kΩ, AOL ≥ 90dB | 3 | ||
| Voltage Output Swing from Rail Over Temperature | 500 | mV | RL = 5kΩ, AOL ≥ 90dB, over temperature | 3 | |||
| Short-Circuit Current | ISC | -5 | 5 | 5 | mA | 3 | |
| Quiescent Current (per amplifier) | IQ | 20 | 32 | µA | IO = 0 | 3 | |
| Quiescent Current Over Temperature (per amplifier) | IQ | 36 | µA | IO = 0, over temperature | 3 | ||
| Thermal Resistance θJA, SO-8 Surface-Mount | θJA | 150 | °C/W | SO-8 surface-mount package | 3 |
CAD (KiCad official)
- Symbol:
OPA2336UA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
opa2336ua-etched.step/opa2336ua-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2336ua.step/opa2336ua.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
c9413cc89f5cf311, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).