main
Ray
Publish 0.1.0
d942e9b
OPA2333MM
HGSEMI · Operational Amplifier · MSOP-8
OPA2333MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A output; the output swing is stated as within 100mV of the supply rails, and the device is unity-gain stable. |
| 2 | -IN A | input | Channel A inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V. |
| 3 | +IN A | input | Channel A non-inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V. |
| 4 | V- | power_in | Negative power supply (lowest potential); the operating supply range is 1.8V to 5.5V total (V+ minus V-). |
| 5 | +IN B | input | Channel B non-inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V. |
| 6 | -IN B | input | Channel B inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V. |
| 7 | OUT B | output | Channel B output; the output swing is stated as within 100mV of the supply rails, and the device is unity-gain stable. |
| 8 | V+ | power_in | Positive power supply (highest potential); the operating supply range is 1.8V to 5.5V total (V+ minus V-). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (OPA2333, non-B) | VOS | 2 | 15 | µV | VS = 5V | 8 | |
| Power supply rejection ratio | PSRR | 1 | 8 | µV/V | VS = 1.8V to 5.5V | 8 | |
| Input bias current | IB | -70 | 70 | pA | 8 | ||
| Input bias current over full temperature range | IB | -150 | 150 | pA | TA = -40°C to +125°C | 8 | |
| Input offset current | IOS | -140 | 140 | pA | 8 | ||
| Common-mode rejection ratio | CMRR | 102 | 115 | dB | (V-) - 0.1V < VCM < (V+) + 0.1V | 8 | |
| Open-loop voltage gain | AOL | 102 | 130 | dB | (V-) + 0.1V < VO < (V+) - 0.1V | 8 | |
| Output voltage swing from supply rail | 30 | 70 | mV | TA = -40°C to +125°C | 8 | ||
| Short-circuit current | ISC | -5 | 5 | mA | 8 | ||
| Quiescent current per amplifier | IQ | 17 | 28 | µA | IO = 0mA, TA = -40°C to +125°C | 9 | |
| Supply voltage (rated range) | VS | 1.8 | 5.5 | V | 6 | ||
| Rated temperature range | -40 | 125 | °C | 6 | |||
| Operating temperature range | -40 | 85 | °C | 9 | |||
| Supply voltage | VS | 7 | V | VS = (V+) - (V-) | 6 | ||
| Current at signal input pins | -10 | 10 | mA | 6 | |||
| Operating temperature | -40 | 125 | °C | 6 | |||
| Soldering lead temperature (10 s) | 260 | °C | 10 s | 6 | |||
| Junction temperature | 150 | °C | 6 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| ESD human body model (HBM) | V(ESD) | -4000 | 4000 | V | ANSI/ESDA/JEDEC JS-001 | 6 | |
| ESD charged device model (CDM) | V(ESD) | -1000 | 1000 | V | JEDEC JESD22-C101 | 6 | |
| Junction-to-ambient thermal resistance (MSOP-8) | RθJA | 180.3 | °C/W | 7 | |||
| Junction-to-case (top) thermal resistance (MSOP-8) | RθJC(top) | 48.1 | °C/W | 7 | |||
| Junction-to-board thermal resistance (MSOP-8) | RθJB | 100.9 | °C/W | 7 | |||
| Junction-to-top characterization parameter (MSOP-8) | ψJT | 2.4 | °C/W | 7 | |||
| Junction-to-board characterization parameter (MSOP-8) | ψJB | 99.3 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
OPA2333MM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
opa2333mm-etched.step/opa2333mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2333mm.step/opa2333mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (20 pp, sha256
bc8cb63c9597692f, retrieved 2026-11-04, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA2333MM
**HGSEMI** · Operational Amplifier · MSOP-8
OPA2333MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A output; the output swing is stated as within 100mV of the supply rails, and the device is unity-gain stable. |
| 2 | -IN A | input | Channel A inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V. |
| 3 | +IN A | input | Channel A non-inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V. |
| 4 | V- | power_in | Negative power supply (lowest potential); the operating supply range is 1.8V to 5.5V total (V+ minus V-). |
| 5 | +IN B | input | Channel B non-inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V. |
| 6 | -IN B | input | Channel B inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V. |
| 7 | OUT B | output | Channel B output; the output swing is stated as within 100mV of the supply rails, and the device is unity-gain stable. |
| 8 | V+ | power_in | Positive power supply (highest potential); the operating supply range is 1.8V to 5.5V total (V+ minus V-). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (OPA2333, non-B) | VOS | | 2 | 15 | µV | VS = 5V | 8 |
| Power supply rejection ratio | PSRR | | 1 | 8 | µV/V | VS = 1.8V to 5.5V | 8 |
| Input bias current | IB | -70 | | 70 | pA | | 8 |
| Input bias current over full temperature range | IB | -150 | | 150 | pA | TA = -40°C to +125°C | 8 |
| Input offset current | IOS | -140 | | 140 | pA | | 8 |
| Common-mode rejection ratio | CMRR | 102 | 115 | | dB | (V-) - 0.1V < VCM < (V+) + 0.1V | 8 |
| Open-loop voltage gain | AOL | 102 | 130 | | dB | (V-) + 0.1V < VO < (V+) - 0.1V | 8 |
| Output voltage swing from supply rail | | | 30 | 70 | mV | TA = -40°C to +125°C | 8 |
| Short-circuit current | ISC | -5 | | 5 | mA | | 8 |
| Quiescent current per amplifier | IQ | | 17 | 28 | µA | IO = 0mA, TA = -40°C to +125°C | 9 |
| Supply voltage (rated range) | VS | 1.8 | | 5.5 | V | | 6 |
| Rated temperature range | | -40 | | 125 | °C | | 6 |
| Operating temperature range | | -40 | | 85 | °C | | 9 |
| Supply voltage | VS | | | 7 | V | VS = (V+) - (V-) | 6 |
| Current at signal input pins | | -10 | | 10 | mA | | 6 |
| Operating temperature | | -40 | | 125 | °C | | 6 |
| Soldering lead temperature (10 s) | | | | 260 | °C | 10 s | 6 |
| Junction temperature | | | | 150 | °C | | 6 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 6 |
| ESD human body model (HBM) | V(ESD) | -4000 | | 4000 | V | ANSI/ESDA/JEDEC JS-001 | 6 |
| ESD charged device model (CDM) | V(ESD) | -1000 | | 1000 | V | JEDEC JESD22-C101 | 6 |
| Junction-to-ambient thermal resistance (MSOP-8) | RθJA | | 180.3 | | °C/W | | 7 |
| Junction-to-case (top) thermal resistance (MSOP-8) | RθJC(top) | | 48.1 | | °C/W | | 7 |
| Junction-to-board thermal resistance (MSOP-8) | RθJB | | 100.9 | | °C/W | | 7 |
| Junction-to-top characterization parameter (MSOP-8) | ψJT | | 2.4 | | °C/W | | 7 |
| Junction-to-board characterization parameter (MSOP-8) | ψJB | | 99.3 | | °C/W | | 7 |
## CAD (KiCad official)
- Symbol: `OPA2333MM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `opa2333mm-etched.step` / `opa2333mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa2333mm.step` / `opa2333mm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/opa2333mm-datasheet.pdf) (20 pp, sha256 `bc8cb63c9597692f`, retrieved 2026-11-04, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa2333mm-datasheet.pdf)