main
Ray
opa2333hd: specified limits as data (metadata.characteristics, 48 rows from the datasheet)
89f3861
OPA2333HD
Texas Instruments · Precision Op Amps · SOIC-8
OPA2333HD from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Analog output of channel A. Rail-to-rail output stage swings within 150 mV of the supply rails; short-circuit protected (one amplifier per package). |
| 2 | -IN A | input | Inverting analog input of channel A. High-impedance CMOS input with common-mode range extending 100 mV beyond both supply rails; internal ESD/diode clamps to V+ and V- (limit input current to <10 mA if signal exceeds rails by more than 0.3 V). |
| 3 | +IN A | input | Noninverting analog input of channel A. High-impedance CMOS input with common-mode range extending 100 mV beyond both supply rails; diode-clamped to the supplies. |
| 4 | V- | power_in | Negative (lowest) power-supply pin. Single-supply operation ties this to GND; total supply span (V+) - (V-) must be 1.8 V to 5.5 V. Also serves as the die backside potential. |
| 5 | +IN B | input | Noninverting analog input of channel B. High-impedance CMOS input with common-mode range extending 100 mV beyond both supply rails; diode-clamped to the supplies. |
| 6 | -IN B | input | Inverting analog input of channel B. High-impedance CMOS input with common-mode range extending 100 mV beyond both supply rails; diode-clamped to the supplies. |
| 7 | OUT B | output | Analog output of channel B. Rail-to-rail output stage swings within 150 mV of the supply rails; short-circuit protected (one amplifier per package). |
| 8 | V+ | power_in | Positive (highest) power-supply pin. Accepts 1.8 V to 5.5 V above V- (single-supply) or ±0.9 V to ±2.75 V (split-supply). Bypass to V- with a 100 nF ceramic capacitor placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
OPA2333HDOPA2333HDG4OPA2333HDHJDOPA2333HDHKJOPA2333HDHKQOPA2333HDHKLOPA2333HDSKGD1
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 2 | 10 | μV | VS = 5 V; TA = 25°C | 6 | |
| Input offset voltage | VOS | 22 | μV | VS = 5 V; TA = –55°C to 125°C | 6 | ||
| Input offset voltage | VOS | 26 | μV | VS = 5 V; TA = –55°C to 175°C | 6 | ||
| Input offset voltage vs power supply | PSRR | 1 | 6 | μV/V | VS = 1.8 V to 5.5 V; TA = –55°C to 125°C | 6 | |
| Input offset voltage vs power supply | PSRR | 1.2 | 8 | μV/V | VS = 1.8 V to 5.5 V; TA = –55°C to 175°C | 6 | |
| Input offset voltage temperature drift | dVOS/dT | 0.02 | μV/°C | VS = 5 V; TA = –55°C to 125°C | 6 | ||
| Input offset voltage temperature drift | dVOS/dT | 0.05 | μV/°C | VS = 5 V; TA = –55°C to 175°C | 6 | ||
| Input bias current | IB | -200 | 70 | 200 | pA | TA = 25°C | 6 |
| Input bias current | IB | -150 | 150 | pA | TA = –55°C to 125°C | 6 | |
| Input bias current | IB | -1250 | 1250 | pA | TA = –55°C to 175°C | 6 | |
| Input offset current | IOS | -400 | 140 | 400 | pA | TA = –55°C to 125°C | 6 |
| Input offset current | IOS | -700 | 700 | pA | TA = –55°C to 175°C | 6 | |
| Common mode rejection ratio | CMRR | 102 | 130 | dB | (V–) – 0.1 V < VCM < (V+) + 0.1 V; TA = –55°C to 125°C | 6 | |
| Common mode rejection ratio | CMRR | 101 | dB | (V–) – 0.1 V < VCM < (V+) + 0.1 V; TA = –55°C to 175°C | 6 | ||
| Open-loop voltage gain | AOL | 104 | 130 | dB | (V–) + 100 mV < VO < (V+) – 100 mV, RL = 10 kΩ; TA = –55°C to 125°C | 6 | |
| Open-loop voltage gain | AOL | 93 | 110 | dB | (V–) + 100 mV < VO < (V+) – 100 mV, RL = 10 kΩ; TA = –55°C to 175°C | 6 | |
| Voltage output swing from rail | 30 | 50 | mV | RL = 10 kΩ; TA = 25°C | 7 | ||
| Voltage output swing from rail | 85 | mV | RL = 10 kΩ; TA = –55°C to 125°C | 7 | |||
| Voltage output swing from rail | 110 | mV | RL = 10 kΩ; TA = –55°C to 175°C | 7 | |||
| Short-circuit current | ISC | -5 | 5 | mA | TA = 25°C | 7 | |
| Quiescent current per amplifier | IQ | 17 | 25 | μA | IO = 0; TA = 25°C | 7 | |
| Quiescent current per amplifier | IQ | 30 | μA | IO = 0; TA = –55°C to 125°C | 7 | ||
| Quiescent current per amplifier | IQ | 35 | 40 | μA | IO = 0; TA = –55°C to 175°C | 7 | |
| Supply voltage | 7 | V | 5 | ||||
| Signal input terminals voltage | -0.3 | V | 5 | ||||
| Operating temperature | TA | -55 | 175 | °C | D package | 5 | |
| Junction temperature | TJ | 175 | °C | D package | 5 | ||
| Storage temperature | Tstg | -65 | 210 | °C | 5 | ||
| Supply voltage | VS | 1.8 | 5 | 5.5 | V | VS = (V+) – (V–) | 5 |
| Operating temperature | TA | -55 | 175 | °C | D package | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 117.5 | °C/W | High-K board, no airflow | 5 | ||
| Junction-to-board thermal resistance | RθJB | 57.7 | °C/W | High-K board without underfill | 5 | ||
| Junction-to-top characterization parameter | ψJT | 19.4 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 57.2 | °C/W | 5 | |||
| Input noise voltage, peak-to-peak | 0.3 | μVPP | f = 0.01 Hz to 1 Hz; TA = –55°C to 125°C | 6 | |||
| Input noise voltage, peak-to-peak | 1 | μVPP | f = 0.01 Hz to 1 Hz; TA = –55°C to 175°C | 6 | |||
| Input noise voltage, peak-to-peak | 1.1 | μVPP | f = 0.1 Hz to 10 Hz; TA = –55°C to 125°C | 6 | |||
| Input noise voltage, peak-to-peak | 1.5 | μVPP | f = 0.1 Hz to 10 Hz; TA = –55°C to 175°C | 6 | |||
| Input noise current density | in | 100 | fA/√Hz | f = 10 Hz; TA = 25°C | 6 | ||
| Input capacitance, differential | 2 | pF | Differential; TA = –55°C to 125°C | 6 | |||
| Input capacitance, differential | 4.25 | pF | Differential; TA = –55°C to 175°C | 6 | |||
| Input capacitance, common mode | 4 | pF | Common mode; TA = –55°C to 125°C | 6 | |||
| Input capacitance, common mode | 12.25 | pF | Common mode; TA = –55°C to 175°C | 6 | |||
| Gain-bandwidth product | GBW | 350 | kHz | CL = 100 pF; TA = –55°C to 125°C | 7 | ||
| Slew rate | SR | 0.16 | V/μs | G = 1; TA = –55°C to 125°C | 7 | ||
| Slew rate | SR | 0.25 | V/μs | G = 1; TA = –55°C to 175°C | 7 | ||
| Open-loop output impedance | 2 | kΩ | f = 350 kHz, IO = 0 | 7 | |||
| Turnon time | 100 | μs | VS = 5 V; TA = 25°C | 7 |
CAD (KiCad official)
- Symbol:
OPA2333HD - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (None pp, sha256
62b804e0df311bce, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA2333HD
**Texas Instruments** · Precision Op Amps · SOIC-8
OPA2333HD from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Analog output of channel A. Rail-to-rail output stage swings within 150 mV of the supply rails; short-circuit protected (one amplifier per package). |
| 2 | -IN A | input | Inverting analog input of channel A. High-impedance CMOS input with common-mode range extending 100 mV beyond both supply rails; internal ESD/diode clamps to V+ and V- (limit input current to <10 mA if signal exceeds rails by more than 0.3 V). |
| 3 | +IN A | input | Noninverting analog input of channel A. High-impedance CMOS input with common-mode range extending 100 mV beyond both supply rails; diode-clamped to the supplies. |
| 4 | V- | power_in | Negative (lowest) power-supply pin. Single-supply operation ties this to GND; total supply span (V+) - (V-) must be 1.8 V to 5.5 V. Also serves as the die backside potential. |
| 5 | +IN B | input | Noninverting analog input of channel B. High-impedance CMOS input with common-mode range extending 100 mV beyond both supply rails; diode-clamped to the supplies. |
| 6 | -IN B | input | Inverting analog input of channel B. High-impedance CMOS input with common-mode range extending 100 mV beyond both supply rails; diode-clamped to the supplies. |
| 7 | OUT B | output | Analog output of channel B. Rail-to-rail output stage swings within 150 mV of the supply rails; short-circuit protected (one amplifier per package). |
| 8 | V+ | power_in | Positive (highest) power-supply pin. Accepts 1.8 V to 5.5 V above V- (single-supply) or ±0.9 V to ±2.75 V (split-supply). Bypass to V- with a 100 nF ceramic capacitor placed close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `OPA2333HD`
- `OPA2333HDG4`
- `OPA2333HDHJD`
- `OPA2333HDHKJ`
- `OPA2333HDHKQ`
- `OPA2333HDHKL`
- `OPA2333HDSKGD1`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | | 2 | 10 | μV | VS = 5 V; TA = 25°C | 6 |
| Input offset voltage | VOS | | | 22 | μV | VS = 5 V; TA = –55°C to 125°C | 6 |
| Input offset voltage | VOS | | | 26 | μV | VS = 5 V; TA = –55°C to 175°C | 6 |
| Input offset voltage vs power supply | PSRR | | 1 | 6 | μV/V | VS = 1.8 V to 5.5 V; TA = –55°C to 125°C | 6 |
| Input offset voltage vs power supply | PSRR | | 1.2 | 8 | μV/V | VS = 1.8 V to 5.5 V; TA = –55°C to 175°C | 6 |
| Input offset voltage temperature drift | dVOS/dT | | | 0.02 | μV/°C | VS = 5 V; TA = –55°C to 125°C | 6 |
| Input offset voltage temperature drift | dVOS/dT | | | 0.05 | μV/°C | VS = 5 V; TA = –55°C to 175°C | 6 |
| Input bias current | IB | -200 | 70 | 200 | pA | TA = 25°C | 6 |
| Input bias current | IB | -150 | | 150 | pA | TA = –55°C to 125°C | 6 |
| Input bias current | IB | -1250 | | 1250 | pA | TA = –55°C to 175°C | 6 |
| Input offset current | IOS | -400 | 140 | 400 | pA | TA = –55°C to 125°C | 6 |
| Input offset current | IOS | -700 | | 700 | pA | TA = –55°C to 175°C | 6 |
| Common mode rejection ratio | CMRR | 102 | 130 | | dB | (V–) – 0.1 V < VCM < (V+) + 0.1 V; TA = –55°C to 125°C | 6 |
| Common mode rejection ratio | CMRR | 101 | | | dB | (V–) – 0.1 V < VCM < (V+) + 0.1 V; TA = –55°C to 175°C | 6 |
| Open-loop voltage gain | AOL | 104 | 130 | | dB | (V–) + 100 mV < VO < (V+) – 100 mV, RL = 10 kΩ; TA = –55°C to 125°C | 6 |
| Open-loop voltage gain | AOL | 93 | 110 | | dB | (V–) + 100 mV < VO < (V+) – 100 mV, RL = 10 kΩ; TA = –55°C to 175°C | 6 |
| Voltage output swing from rail | | | 30 | 50 | mV | RL = 10 kΩ; TA = 25°C | 7 |
| Voltage output swing from rail | | | | 85 | mV | RL = 10 kΩ; TA = –55°C to 125°C | 7 |
| Voltage output swing from rail | | | | 110 | mV | RL = 10 kΩ; TA = –55°C to 175°C | 7 |
| Short-circuit current | ISC | -5 | | 5 | mA | TA = 25°C | 7 |
| Quiescent current per amplifier | IQ | | 17 | 25 | μA | IO = 0; TA = 25°C | 7 |
| Quiescent current per amplifier | IQ | | | 30 | μA | IO = 0; TA = –55°C to 125°C | 7 |
| Quiescent current per amplifier | IQ | | 35 | 40 | μA | IO = 0; TA = –55°C to 175°C | 7 |
| Supply voltage | | | | 7 | V | | 5 |
| Signal input terminals voltage | | -0.3 | | | V | | 5 |
| Operating temperature | TA | -55 | | 175 | °C | D package | 5 |
| Junction temperature | TJ | | | 175 | °C | D package | 5 |
| Storage temperature | Tstg | -65 | | 210 | °C | | 5 |
| Supply voltage | VS | 1.8 | 5 | 5.5 | V | VS = (V+) – (V–) | 5 |
| Operating temperature | TA | -55 | | 175 | °C | D package | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 117.5 | | °C/W | High-K board, no airflow | 5 |
| Junction-to-board thermal resistance | RθJB | | 57.7 | | °C/W | High-K board without underfill | 5 |
| Junction-to-top characterization parameter | ψJT | | 19.4 | | °C/W | | 5 |
| Junction-to-board characterization parameter | ψJB | | 57.2 | | °C/W | | 5 |
| Input noise voltage, peak-to-peak | | | 0.3 | | μVPP | f = 0.01 Hz to 1 Hz; TA = –55°C to 125°C | 6 |
| Input noise voltage, peak-to-peak | | | 1 | | μVPP | f = 0.01 Hz to 1 Hz; TA = –55°C to 175°C | 6 |
| Input noise voltage, peak-to-peak | | | 1.1 | | μVPP | f = 0.1 Hz to 10 Hz; TA = –55°C to 125°C | 6 |
| Input noise voltage, peak-to-peak | | | 1.5 | | μVPP | f = 0.1 Hz to 10 Hz; TA = –55°C to 175°C | 6 |
| Input noise current density | in | | 100 | | fA/√Hz | f = 10 Hz; TA = 25°C | 6 |
| Input capacitance, differential | | | 2 | | pF | Differential; TA = –55°C to 125°C | 6 |
| Input capacitance, differential | | | 4.25 | | pF | Differential; TA = –55°C to 175°C | 6 |
| Input capacitance, common mode | | | 4 | | pF | Common mode; TA = –55°C to 125°C | 6 |
| Input capacitance, common mode | | | 12.25 | | pF | Common mode; TA = –55°C to 175°C | 6 |
| Gain-bandwidth product | GBW | | 350 | | kHz | CL = 100 pF; TA = –55°C to 125°C | 7 |
| Slew rate | SR | | 0.16 | | V/μs | G = 1; TA = –55°C to 125°C | 7 |
| Slew rate | SR | | 0.25 | | V/μs | G = 1; TA = –55°C to 175°C | 7 |
| Open-loop output impedance | | | 2 | | kΩ | f = 350 kHz, IO = 0 | 7 |
| Turnon time | | | 100 | | μs | VS = 5 V; TA = 25°C | 7 |
## CAD (KiCad official)
- Symbol: `OPA2333HD`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/opa2333-ht) (None pp, sha256 `62b804e0df311bce`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa2333hd-datasheet.pdf)