component
OPA2320SAIDGST
Public Made by Adomby adom
Texas Instruments Operational Amplifier, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA2320SAIDGST
Texas Instruments · Operational Amplifier · VSSOP-10-0.5mm
OPA2320SAIDGST from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A amplifier output. |
| 2 | -IN A | input | Inverting input of channel A. |
| 3 | +IN A | input | Non-inverting input of channel A. |
| 4 | V- | power_in | Negative power supply, the lowest potential in the circuit. |
| 5 | SHDN A | input | Channel A shutdown input, active low. |
| 6 | SHDN B | input | Channel B shutdown input, active low. |
| 7 | +IN B | input | Non-inverting input of channel B. |
| 8 | -IN B | input | Inverting input of channel B. |
| 9 | OUT B | output | Channel B amplifier output. |
| 10 | V+ | power_in | Positive power supply, the highest potential in the circuit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Amplifiers/Comparators |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, rated range | VS | 1.8 | 5.5 | V | 6 | ||
| Rated ambient temperature range | TA | -40 | 125 | °C | 6 | ||
| Supply voltage VS = (V+) – (V–) | VS | 6 | V | 6 | |||
| Signal input pin current | -10 | 10 | mA | Input pins diode-clamped to supply rails | 6 | ||
| Operating temperature range | TA | -40 | 150 | °C | 6 | ||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 6 | ||
| Input offset voltage | VOS | 40 | 150 | µV | 7 | ||
| Input offset voltage drift vs temperature | dVOS/dT | 1.5 | 5 | µV/°C | VS = 5.5V, TA = -40°C to 125°C | 7 | |
| Input offset voltage vs power supply (PSR) | PSR | 5 | 20 | µV/V | VS = 1.8V to 5.5V, TA = 25°C | 7 | |
| Input offset voltage vs power supply (PSR), full temperature | PSR | 15 | µV/V | VS = 1.8V to 5.5V, TA = -40°C to 125°C | 7 | ||
| Common-mode rejection ratio | CMRR | 100 | 114 | dB | VS = 5.5V, (V–) – 0.1V < VCM < (V+) + 0.1V, TA = 25°C | 7 | |
| Common-mode rejection ratio, full temperature | CMRR | 96 | dB | VS = 5.5V, (V–) – 0.1V < VCM < (V+) + 0.1V, TA = -40°C to 125°C | 7 | ||
| Input bias current | IB | -0.9 | 0.2 | 0.9 | pA | TA = 25°C | 7 |
| Input bias current | IB | -50 | 50 | pA | TA = -40°C to 85°C | 7 | |
| Input bias current (OPA2320 and OPA2320S) | IB | -400 | 400 | pA | TA = -40°C to 125°C | 7 | |
| Input offset current | IOS | -0.9 | 0.2 | 0.9 | pA | TA = 25°C | 7 |
| Input offset current | IOS | -50 | 50 | pA | TA = -40°C to 85°C | 7 | |
| Input offset current | IOS | -400 | 400 | pA | TA = -40°C to 125°C | 7 | |
| Open-loop voltage gain | AOL | 114 | 132 | dB | 0.1V < VO < (V+) – 0.1V, RL = 10kΩ, TA = 25°C | 8 | |
| Open-loop voltage gain | AOL | 100 | 130 | dB | 0.1V < VO < (V+) – 0.1V, RL = 10kΩ, TA = -40°C to 125°C | 8 | |
| Open-loop voltage gain | AOL | 108 | 123 | dB | 0.2V < VO < (V+) – 0.2V, RL = 2kΩ, TA = 25°C | 8 | |
| Open-loop voltage gain | AOL | 96 | 130 | dB | 0.2V < VO < (V+) – 0.2V, RL = 2kΩ, TA = -40°C to 125°C | 8 | |
| Overload recovery time | 100 | ns | VIN × G > VS | 8 | |||
| Output voltage swing from rail | VO | 10 | 20 | mV | RL = 10kΩ, TA = 25°C | 8 | |
| Output voltage swing from rail | VO | 25 | 35 | mV | RL = 2kΩ, TA = 25°C | 8 | |
| Output voltage swing from rail | VO | 30 | mV | RL = 10kΩ, TA = -40°C to 125°C | 8 | ||
| Output voltage swing from rail | VO | 45 | mV | RL = 2kΩ, TA = -40°C to 125°C | 8 | ||
| Short-circuit current | ISC | -65 | 65 | mA | VS = 5.5V | 8 | |
| Quiescent current in shutdown (per amplifier) | IQSD | 0.1 | 0.5 | µA | All amplifiers disabled, SHDN = V– | 8 | |
| Quiescent current in shutdown, partial (OPA2320S only) | IQSD | 1.6 | mA | OPA2320S only, SHDN A = VS–, SHDN B = VS+ | 8 | ||
| High-level input voltage (SHDN) | VIH | 5.5 | V | Amplifier enabled | 8 | ||
| Amplifier enable time (full shutdown) | tON | 20 | µs | G = 1, VOUT = 0.1 × VS/2, full shutdown | 8 | ||
| Amplifier enable time (partial shutdown, OPA2320S only) | tON | 6 | µs | OPA2320S only, partial shutdown | 8 | ||
| Amplifier disable time | tOFF | 3 | µs | G = 1, VOUT = 0.1 × VS/2 | 8 | ||
| Quiescent current per amplifier (OPA2320 and OPA2320S) | IQ | 1.45 | 1.6 | mA | IO = 0mA, VS = 5.5V, TA = 25°C | 9 | |
| Quiescent current per amplifier (OPA2320 and OPA2320S) | IQ | 1.7 | mA | IO = 0mA, VS = 5.5V, TA = -40°C to 125°C | 9 | ||
| Junction-to-ambient thermal resistance (DGS VSSOP-10) | RθJA | 171.5 | °C/W | 7 | |||
| Junction-to-case (top) thermal resistance (DGS VSSOP-10) | RθJC(top) | 43 | °C/W | 7 | |||
| Junction-to-board thermal resistance (DGS VSSOP-10) | RθJB | 91.4 | °C/W | 7 | |||
| Junction-to-top characterization parameter (DGS VSSOP-10) | ψJT | 1.9 | °C/W | 7 | |||
| Junction-to-board characterization parameter (DGS VSSOP-10) | ψJB | 89.9 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
OPA2320SAIDGST - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
opa2320saidgst-etched.step/opa2320saidgst-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2320saidgst.step/opa2320saidgst.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (57 pp, sha256
b434006b69b2f9d7, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).