Generated by kicad-footprint-generator · KiCad file format 20260206
OPA2314AIDRBR
Texas Instruments · Operational Amplifier · VSON-8-EP(3x3)
OPA2314AIDRBR from Texas Instruments, in a VSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A typically swings to within 5 mV of either supply rail for resistive loads up to 10 kΩ. |
| 2 | -IN A | input | Inverting input of amplifier A accepting signal voltage from (V-) - 0.5 V to (V+) + 0.5 V with signal current -10 to 10 mA. |
| 3 | +IN A | input | Noninverting input of amplifier A accepting signal voltage from (V-) - 0.5 V to (V+) + 0.5 V with signal current -10 to 10 mA. |
| 4 | V- | power_in | Negative (lowest) supply voltage with recommended operating range 1.8 V to 5.5 V; connect exposed thermal pad to this pin. |
| 5 | +IN B | input | Noninverting input of amplifier B accepting signal voltage from (V-) - 0.5 V to (V+) + 0.5 V with signal current -10 to 10 mA. |
| 6 | -IN B | input | Inverting input of amplifier B accepting signal voltage from (V-) - 0.5 V to (V+) + 0.5 V with signal current -10 to 10 mA. |
| 7 | OUT B | output | Output of amplifier B typically swings to within 5 mV of either supply rail for resistive loads up to 10 kΩ. |
| 8 | V+ | power_in | Positive (highest) supply voltage with recommended operating range 1.8 V to 5.5 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSON-8-EP(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | 7 | V | 6 | ||||
| Signal input terminals current | -10 | 10 | mA | Signal input terminals; input signals beyond the rails should be current limited to 10 mA or less | 6 | ||
| Operating temperature | TA | -40 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Supply voltage | VS | 1.8 | 5.5 | V | 6 | ||
| Ambient operating temperature | TA | -40 | 125 | °C | 6 | ||
| Junction-to-ambient thermal resistance (DRB) | RθJA | 53.8 | °C/W | OPA2314 DRB (DFN) 8-pin package | 7 | ||
| Junction-to-case(top) thermal resistance (DRB) | RθJC(top) | 69.2 | °C/W | OPA2314 DRB (DFN) 8-pin package | 7 | ||
| Junction-to-board thermal resistance (DRB) | RθJB | 20.1 | °C/W | OPA2314 DRB (DFN) 8-pin package | 7 | ||
| Input offset voltage | VOS | 0.5 | 2.5 | mV | VCM = (VS+) – 1.3 V; TA = 25 °C | 7 | |
| PSRR vs power supply | PSRR | 78 | 92 | dB | VCM = (VS+) – 1.3 V; TA = 25 °C | 7 | |
| CMRR (common-mode range below transition region) | CMRR | 75 | 96 | dB | VS = 1.8 V to 5.5 V, (VS–) – 0.2 V < VCM < (VS+) – 1.3 V; TA = 25 °C | 7 | |
| CMRR (full common-mode range) | CMRR | 66 | 80 | dB | VS = 5.5 V, VCM = –0.2 V to 5.7 V | 7 | |
| CMRR over temperature | CMRR | 70 | 86 | dB | Over temperature; VS = 1.8 V, (VS–) – 0.2 V < VCM < (VS+) – 1.3 V | 7 | |
| CMRR over temperature | CMRR | 73 | 90 | dB | Over temperature; VS = 5.5 V, (VS–) – 0.2 V < VCM < (VS+) – 1.3 V | 7 | |
| Input bias current | IB | 0.2 | 10 | pA | 7 | ||
| Input offset current | IOS | 0.2 | 10 | pA | 7 | ||
| Open-loop voltage gain | AOL | 90 | 115 | dB | VS = 1.8 V, 0.2 V < VO < (V+) – 0.2 V, RL = 10 kΩ | 8 | |
| Open-loop voltage gain | AOL | 100 | 128 | dB | VS = 5.5 V, 0.2 V < VO < (V+) – 0.2 V, RL = 10 kΩ | 8 | |
| Open-loop voltage gain | AOL | 90 | 100 | dB | VS = 1.8 V, 0.5 V < VO < (V+) – 0.5 V, RL = 2 kΩ | 8 | |
| Open-loop voltage gain | AOL | 94 | 110 | dB | VS = 5.5 V, 0.5 V < VO < (V+) – 0.5 V, RL = 2 kΩ | 8 | |
| Open-loop voltage gain over temperature | AOL | 90 | 110 | dB | Over temperature; VS = 5.5 V, 0.2 V < VO < (V+) – 0.2 V, RL = 10 kΩ | 8 | |
| Voltage output swing from supply rails | VO | 5 | 15 | mV | VS = 1.8 V, RL = 10 kΩ | 8 | |
| Voltage output swing from supply rails | VO | 5 | 20 | mV | VS = 5.5 V, RL = 10 kΩ | 8 | |
| Voltage output swing from supply rails | VO | 15 | 30 | mV | VS = 1.8 V, RL = 2 kΩ | 8 | |
| Voltage output swing from supply rails | VO | 22 | 40 | mV | VS = 5.5 V, RL = 2 kΩ | 8 | |
| Specified voltage range | VS | 1.8 | 5.5 | V | 8 | ||
| Quiescent current per amplifier | IQ | 130 | 180 | µA | VS = 1.8 V, IO = 0 mA | 8 | |
| Quiescent current per amplifier | IQ | 150 | 190 | µA | VS = 5 V, IO = 0 mA | 8 | |
| Specified temperature range | -40 | 125 | °C | 8 |
CAD (KiCad official)
- Symbol:
OPA2314AIDRBR - Footprint:
Package_SON:VSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm - 3D model: VSON-8-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal VQFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
opa2314aidrbr-etched.step/opa2314aidrbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2314aidrbr.step/opa2314aidrbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (53 pp, sha256
7f610a6b13b36010, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).