main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers opa228ua-2k5: viewers rendered from the public page · Ray
opa228ua-2k5-etched.glb Publish 0.1.0 · Ray
opa228ua-2k5-etched.step opa228ua-2k5: factory component page (tier=mfr) · Ray
opa228ua-2k5-hero.glb opa228ua-2k5: hero GLB from the etched model (keeps the MPN mark) · Ray
opa228ua-2k5-hero.overlay.json Publish 0.1.0 · Ray
opa228ua-2k5.glb Publish 0.1.0 · Ray
opa228ua-2k5.kicad_mod Publish 0.1.0 · Ray
opa228ua-2k5.kicad_sym Publish 0.1.0 · Ray
opa228ua-2k5.lbr Publish 0.1.0 · Ray
opa228ua-2k5.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

OPA228UA

Texas Instruments · Precision Op Amps · SOIC-8

OPA228UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Offset Trim input Input offset voltage trim pin; leave floating if not used and use only to null the amplifier offset.
2 -In input Inverting input.
3 +In input Noninverting input.
4 V- power_in Negative (lowest) power supply; supply range is ±2.5 V to ±18 V dual or 5 V to 36 V single, per the recommended operating conditions.
5 NC unconnected No internal connection; can be left floating.
6 Output output Amplifier output.
7 V+ power_in Positive (highest) power supply; supply range is ±2.5 V to ±18 V dual or 5 V to 36 V single, per the recommended operating conditions.
8 Trim input Input offset voltage trim pin; leave floating if not used and use only to null the amplifier offset.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Single supply voltage, VS = (V+), (V-) (absolute maximum) VS 36 V 5
Dual supply voltage, VS = (V+), (V-) (absolute maximum) VS 18 V 5
Signal input pins current (absolute maximum) 20 mA 5
Operating temperature (absolute maximum) TA -55 125 °C 5
Junction temperature (absolute maximum) TJ 150 °C 5
Storage temperature (absolute maximum) Tstg -65 150 °C 5
Single supply voltage, VS = (V+), (V-) (recommended) VS 4.5 30 36 V Single supply; NOM column printed as 30 5
Dual supply voltage, VS = (V+), (V-) (recommended) VS 2.25 15 18 V Dual supply (±VS); NOM column printed as ±15 5
Specified temperature (recommended) TA -40 85 °C 5
Input offset voltage VOS, UA grade VOS -200 10 200 µV UA grade; TA = +25°C; VS = ±5 V to ±15 V; VCM = VOUT = VS/2; RL = 10 kΩ 9
Input offset voltage VOS, UA grade over temperature VOS -200 200 µV UA grade; TA = -40°C to +85°C 9
Input offset voltage drift dVOS/dT, UA grade dVOS/dT -2 0.3 2 µV/°C UA grade; TA = -40°C to +85°C 9
Power-supply rejection ratio PSRR PSRR -2 0.5 2 µV/V VS = ±2.5 V to ±18 V 9
Power-supply rejection ratio PSRR over temperature PSRR -2 2 µV/V TA = -40°C to +85°C 9
Long-term offset drift 0.2 µV/mo 9
Channel separation (dual, quad), DC 0.2 µV/V DC 9
Channel separation (dual, quad), f = 1 kHz 110 dB f = 1 kHz, RL = 5 kΩ 9
Input bias current IB IB -10 2.5 10 nA 9
Input bias current IB over temperature IB -10 10 nA TA = -40°C to +85°C 9
Input offset current IOS IOS -10 2.5 10 nA 9
Input offset current IOS over temperature IOS -10 10 nA TA = -40°C to +85°C 9
Input voltage noise (peak-to-peak) 90 nVPP f = 0.1 Hz to 10 Hz 9
Input voltage noise (RMS) 15 nVRMS f = 0.1 Hz to 10 Hz 9
Input voltage noise density en en 3.5 nV/√Hz f = 10 Hz 9
Input voltage noise density en en 3 nV/√Hz f = 100 Hz 9
Input current noise density in in 0.4 pA/√Hz f = 1 kHz 9
Common-mode rejection ratio CMRR CMRR 120 138 dB (V-) + 2 V < VCM < (V+), 2 V 9
Common-mode rejection ratio CMRR over temperature CMRR 120 dB TA = -40°C to +85°C 9
Open-loop voltage gain AOL AOL 132 160 dB (V-) + 2 V < VO < (V+), 2 V 10
Open-loop voltage gain AOL over temperature AOL 132 dB TA = -40°C to +85°C 10
Open-loop voltage gain AOL, RL = 600 Ω AOL 132 160 dB (V-) + 3.5 V < VO < (V+), 3.5 V, RL = 600 Ω 10
Open-loop voltage gain AOL, RL = 600 Ω over temperature AOL 132 dB TA = -40°C to +85°C 10
Unity gain bandwidth GBW GBW 33 MHz 10
Slew rate SR SR 11 V/µs 10
Settling time to 0.1% 1.5 µs G = 1, 10-V step, CL = 100 pF 10
Settling time to 0.01% 2 µs G = 1, 10-V step, CL = 100 pF 10
Overload recovery time 0.6 µs VIN × G = VS 10
Total harmonic distortion + noise THD+N THD+N 5e-05 % G = 1, f = 1 kHz, VO = 3.5 VRMS 10
Short-circuit current ISC ISC 45 mA 10
Open-loop output impedance ZO ZO 27 Ω f = 1 MHz 10
Quiescent current per amplifier IQ IQ 3.7 3.8 mA IO = 0 A 10
Quiescent current per amplifier IQ over temperature IQ 4.2 mA TA = -40°C to +85°C 10
Junction-to-ambient thermal resistance RθJA (D, SOIC-8) RθJA 110.1 °C/W OPA228UA, SOIC (D) 8-pin 6
Junction-to-case(top) thermal resistance RθJC(top) (D, SOIC-8) RθJC(top) 52.2 °C/W OPA228UA, SOIC (D) 8-pin 6
Junction-to-board thermal resistance RθJB (D, SOIC-8) RθJB 52.3 °C/W OPA228UA, SOIC (D) 8-pin 6
Junction-to-top characterization parameter ψJT (D, SOIC-8) ψJT 10.4 °C/W OPA228UA, SOIC (D) 8-pin 6
Junction-to-board characterization parameter ψJB (D, SOIC-8) ψJB 51.5 °C/W OPA228UA, SOIC (D) 8-pin 6

CAD (KiCad official)

  • Symbol: OPA228UA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: opa228ua-2k5-etched.step / opa228ua-2k5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa228ua-2k5.step / opa228ua-2k5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 95e85acb5da90138, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF