Generated by kicad-footprint-generator · KiCad file format 20260206
OPA2244EA
The maker sells this part only as OPA2244EA/2K5 (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.12; /250 Obsolete)). The DigiKey and Mouser numbers on this page are for OPA2244EA/2K5.
Texas Instruments · Operational Amplifier · VSSOP-8
OPA2244EA from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Output of amplifier A. |
| 2 | -In A | input | Inverting input of amplifier A; inputs are diode-clamped to the supply rails and should be current-limited to 10mA if they can exceed the rails by more than 0.3V. |
| 3 | +In A | input | Non-inverting input of amplifier A; common-mode range is 0 to (V+) - 0.9V. |
| 4 | V- | power_in | Negative supply (ground in single-supply use); total supply V+ to V- is 2.2V minimum operating, 2.6V to 36V specified. |
| 5 | +In B | input | Non-inverting input of amplifier B; common-mode range is 0 to (V+) - 0.9V. |
| 6 | -In B | input | Inverting input of amplifier B; inputs are diode-clamped to the supply rails and should be current-limited to 10mA if they can exceed the rails by more than 0.3V. |
| 7 | Out B | output | Output of amplifier B. |
| 8 | V+ | power_in | Positive supply; 2.2V to 36V single supply operation (2.6V to 36V specified) and should be bypassed with a 0.01µF ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -1.5 | 0.7 | 1.5 | mV | VS = ±7.5V, VCM = 0 | 3 |
| Input Offset Voltage over temperature | VOS | -2 | 2 | mV | TA = -40°C to 85°C | 3 | |
| Offset voltage drift vs Temperature | dVOS/dT | -4 | 4 | µV/°C | TA = -40°C to 85°C | 3 | |
| Power supply rejection (PSRR) | PSRR | 5 | 50 | µV/V | VS = +2.6V to +36V | 3 | |
| Power supply rejection (PSRR) over temperature | PSRR | 50 | µV/V | TA = -40°C to 85°C, VS = +2.6V to +36V | 3 | ||
| Input Bias Current | IB | -10 | -25 | nA | VCM = VS/2 | 3 | |
| Input Offset Current | IOS | -10 | 1 | 10 | nA | VCM = VS/2 | 3 |
| Common-Mode Rejection | CMRR | 72 | 98 | dB | VS = ±18V, VCM = -18V to +17.1V | 3 | |
| Common-Mode Rejection over temperature | CMRR | 72 | dB | TA = -40°C to 85°C, VS = ±18V, VCM = -18V to +17.1V | 3 | ||
| Open-Loop Voltage Gain | AOL | 86 | 106 | dB | VO = 0.5V to (V+), 0.9 | 3 | |
| Open-Loop Voltage Gain over temperature | AOL | 86 | dB | TA = -40°C to 85°C, VO = 0.5V to (V+), 0.9 | 3 | ||
| Slew Rate | SR | -0.1 | 0.16 | V/µs | G = 1 | 3 | |
| Voltage Output, Negative (RL to VS/2) | VO | 0.2 | 0.5 | V | AOL ≥ 80dB, RL = 20kΩ to VS/2 | 3 | |
| Voltage Output, Negative (RL to VS/2) over temperature | VO | 0.2 | 0.5 | V | TA = -40°C to 85°C, AOL ≥ 80dB, RL = 20kΩ to VS/2 | 3 | |
| Voltage Output, Negative (RL to Ground) | VO | 0.1 | V | AOL ≥ 80dB, RL = 20kΩ to Ground | 3 | ||
| Voltage Output, Negative (RL to Ground) over temperature | VO | 0.1 | V | TA = -40°C to 85°C, AOL ≥ 80dB, RL = 20kΩ to Ground | 3 | ||
| Short-Circuit Current | ISC | -25 | 12 | mA | 3 | ||
| Specified Voltage Range | VS | 2.6 | 36 | V | TA = -40°C to 85°C | 3 | |
| Minimum Operating Voltage | 2.2 | V | 3 | ||||
| Quiescent Current (per amplifier) | IQ | 40 | 50 | µA | IO = 0 | 3 | |
| Quiescent Current (per amplifier) over temperature | IQ | 63 | µA | TA = -40°C to 85°C, IO = 0 | 3 | ||
| Specified Temperature Range | -40 | 85 | °C | 3 | |||
| Operating Temperature Range | -55 | 125 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Supply Voltage, V+ to V- | 36 | V | 5 | ||||
| Input Current | 10 | mA | 5 | ||||
| Operating Temperature (absolute maximum) | -55 | 125 | °C | 5 | |||
| Storage Temperature (absolute maximum) | -65 | 150 | °C | 5 | |||
| Junction Temperature | 150 | °C | 5 | ||||
| Lead Temperature (soldering) | 300 | °C | soldering, 10s | 5 | |||
| ESD Capability | 2000 | V | 5 | ||||
| Channel Separation | 140 | dB | 3 | ||||
| Input Voltage Noise | 0.4 | µVp-p | f = 0.1kHz to 10kHz | 3 | |||
| Input Voltage Noise Density | en | 22 | nV/√Hz | f = 1kHz | 3 | ||
| Current Noise Density | in | 40 | fA/√Hz | f = 1kHz | 3 | ||
| Gain-Bandwidth Product | GBW | 430 | kHz | 3 | |||
| Settling Time | 150 | µs | 0.01% 10V Step | 3 | |||
| Overload Recovery Time | 8 | µs | VIN • Gain = VS | 3 | |||
| Thermal Resistance θJA (MSOP-8 Surface-Mount) | θJA | 200 | °C/W | MSOP-8 surface-mount | 3 |
CAD (KiCad official)
- Symbol:
OPA2244EA - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa2244ea-etched.step/opa2244ea-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2244ea.step/opa2244ea.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
99ee28e90576d87e, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).