Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2211AIDRGT

Texas Instruments · Operational Amplifier · HVSON-8-EP(3x3)

OPA2211AIDRGT from Texas Instruments, in a HVSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output Channel A with voltage swing from (V-)+0.2V to (V+)-0.2V (RL=10kΩ), maximum output current ±30mA.
2 -IN A input Inverting input Channel A with common-mode voltage (V-)+1.8V to (V+)-1.4V (VS≥±5V), maximum input bias current ±250nA.
3 +IN A input Non-inverting input Channel A with common-mode voltage (V-)+1.8V to (V+)-1.4V (VS≥±5V), maximum input bias current ±250nA.
4 V- power_in Negative power supply and thermal pad connection with supply voltage (V+)-(V-) between 4.5V and 36V.
5 +IN B input Non-inverting input Channel B with common-mode voltage (V-)+1.8V to (V+)-1.4V (VS≥±5V), maximum input bias current ±250nA.
6 -IN B input Inverting input Channel B with common-mode voltage (V-)+1.8V to (V+)-1.4V (VS≥±5V), maximum input bias current ±250nA.
7 OUT B output Output Channel B with voltage swing from (V-)+0.2V to (V+)-0.2V (RL=10kΩ), maximum output current ±30mA.
8 V+ power_in Positive power supply with supply voltage (V+)-(V-) between 4.5V and 36V, quiescent current 3.6mA per channel typical.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HVSON-8-EP(3x3)
Category Amplifiers/Comparators
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -50 20 50 μV VS = ±15V 10
Input offset voltage drift dVOS/dT -0.85 0.15 0.85 μV/°C VS = ±15V, TA = –40°C to +125°C 10
Input offset voltage vs supply (PSRR) PSRR 0.1 0.5 μV/V TA = 25°C 10
Input offset voltage vs supply (PSRR) PSRR 3 μV/V TA = –40°C to +125°C 10
Input bias current IB -125 50 125 nA VCM = 0V 10
Input bias current IB -200 200 nA VCM = 0V, TA = –40°C to +125°C 10
Input offset current IOS -75 20 75 nA VCM = 0V 10
Input offset current IOS 150 nA TA = –40°C to +125°C 10
Common-mode rejection ratio CMRR 114 120 dB VS ≥ ±5V, (V–) + 2V ≤ VCM ≤ (V+) – 2V, TA = –40°C to +125°C 10
Common-mode rejection ratio CMRR 110 120 dB VS < ±5V, (V–) + 2V ≤ VCM ≤ (V+) – 2V, TA = –40°C to +125°C 10
Open-loop voltage gain AOL 114 130 dB (V–) + 0.2V ≤ VO ≤ (V+) – 0.2V, RL = 10kΩ, TA = –40°C to +125°C 10
Open-loop voltage gain AOL 110 114 dB (V–) + 0.6V ≤ VO ≤ (V+) – 0.6V, RL = 600Ω 10
Rated supply voltage (dual supply, printed ±2.25 V to ±18 V) VS 2.25 18 V 12
Rated operating supply voltage (single supply) VS 4.5 36 V 28
Quiescent current (per channel) IQ 3.6 4.5 mA IOUT = 0A 12
Quiescent current (per channel) IQ 6 mA IOUT = 0A, TA = –40°C to +125°C 12
Shutdown (disabled) current 1 20 μA Shutdown (disabled) 12
Short-circuit current (source / sink) ISC -45 30 mA 12
Rated ambient temperature range TA -40 125 °C 12
Temperature range (TA 温度范围) TA -55 150 °C 12
Junction-to-ambient thermal resistance RθJA 125 °C/W High-K board 6
Junction-to-board thermal resistance RθJB 28.8 °C/W 6
Junction-to-top characterization parameter ψJT 3 °C/W 6
Junction-to-board characterization parameter ψJB 25 °C/W 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 19.1 °C/W 6

CAD (KiCad official)

  • Symbol: OPA2211AIDRGT
  • Footprint: Package_SON:HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm
  • 3D model: HVSON-8-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal VQFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: opa2211aidrgt-etched.step / opa2211aidrgt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2211aidrgt.step / opa2211aidrgt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (53 pp, sha256 0136da924c2df6bb, retrieved 2026-10-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF