Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2211AIDDAR

Texas Instruments · Precision Op Amps · SOIC-8-EP

OPA2211AIDDAR from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output channel A; delivers 30mA sourcing or 45mA sinking maximum current with output swing (V-) + 0.6V to (V+) - 0.6V.
2 -IN A input Inverting input channel A; accepts voltages from (V-) - 0.5V to (V+) + 0.5V absolute maximum with input bias current ±175nA max.
3 +IN A input Noninverting input channel A; accepts voltages from (V-) - 0.5V to (V+) + 0.5V absolute maximum with input bias current ±175nA max.
4 V- power_in Negative power supply; operates 4.5V to 36V single supply (±2.25V to ±18V dual supply) with absolute maximum 40V supply voltage difference.
5 +IN B input Noninverting input channel B; accepts voltages from (V-) - 0.5V to (V+) + 0.5V absolute maximum with input bias current ±175nA max.
6 -IN B input Inverting input channel B; accepts voltages from (V-) - 0.5V to (V+) + 0.5V absolute maximum with input bias current ±175nA max.
7 OUT B output Output channel B; delivers 30mA sourcing or 45mA sinking maximum current with output swing (V-) + 0.6V to (V+) - 0.6V.
8 V+ power_in Positive power supply; operates 4.5V to 36V single supply (±2.25V to ±18V dual supply) with absolute maximum 40V supply voltage difference.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8-EP
Category Amplifiers/Comparators
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS 20 50 μV VS = ±15V 10
Input offset voltage drift dVOS/dT -0.85 0.15 0.85 μV/°C VS = ±15V, TA = –40°C to +125°C 10
Input offset voltage vs power supply (PSRR) PSRR 0.1 0.5 μV/V TA = 25°C 10
Input offset voltage vs power supply (PSRR) PSRR 3 μV/V TA = -40°C to +125°C 10
Input bias current IB -125 50 125 nA VCM = 0V 10
Input bias current IB -200 200 nA VCM = 0V, TA = –40°C to +125°C 10
Input offset current IOS -75 20 75 nA VCM = 0V 10
Input offset current IOS 150 nA TA = –40°C to +125°C 10
Common-mode rejection ratio CMRR 114 120 dB VS ≥ ±5V, (V–) + 2V ≤ VCM ≤ (V+) – 2V, TA = –40°C to +125°C 10
Common-mode rejection ratio CMRR 110 120 dB VS < ±5V, (V–) + 2V ≤ VCM ≤ (V+) – 2V, TA = –40°C to +125°C 10
Open-loop voltage gain AOL 114 130 dB (V–) + 0.2V ≤ VO ≤ (V+) – 0.2V, RL = 10kΩ, TA = –40°C to +125°C 10
Open-loop voltage gain AOL 110 114 dB (V–) + 0.6V ≤ VO ≤ (V+) – 0.6V, RL = 600Ω 10
Short-circuit current ISC -45 30 mA 12
Shutdown current IQ(SD) 1 20 μA Shutdown (disabled) 12
Quiescent current per channel IQ 3.6 4.5 mA IOUT = 0A 12
Quiescent current per channel IQ 6 mA IOUT = 0A, TA = –40°C to +125°C 12
Supply voltage (rated) VS 2.25 18 V 12
Rated temperature range TA -40 125 °C 12
Temperature range TA -55 150 °C 12
Junction-to-ambient thermal resistance (high-K board) RθJA 50.4 °C/W 6
Junction-to-board thermal resistance RθJB 13 °C/W 6
Junction-to-top characterization parameter ψJT 5.2 °C/W 6
Junction-to-board characterization parameter ψJB 11.7 °C/W 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 1.1 °C/W 6

CAD (KiCad official)

  • Symbol: OPA2211AIDDAR
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: opa2211aiddar-etched.step / opa2211aiddar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2211aiddar.step / opa2211aiddar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (53 pp, sha256 0136da924c2df6bb, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF