Generated by kicad-footprint-generator · KiCad file format 20260206
OPA2188AIDGKT
Texas Instruments · Precision OpAmps · VSSOP-8
OPA2188AIDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of channel A; the output swings to within 15 mV of the rails with no load and is short-circuit protected to ground (one amplifier per package). |
| 2 | -IN A | input | Negative (inverting) input signal for channel A; input signals more than 0.5 V beyond the supply rails should be current-limited to 10 mA or less. |
| 3 | +IN A | input | Positive (noninverting) input signal for channel A; the common-mode voltage range is (V-) to (V+) - 1.5 V. |
| 4 | V- | power_in | Negative (lowest) power supply; the device operates from 4 V to 36 V total (±2 V to ±18 V) and supply voltages above 40 V can permanently damage the device. |
| 5 | +IN B | input | Positive (noninverting) input signal for channel B; the common-mode voltage range is (V-) to (V+) - 1.5 V. |
| 6 | -IN B | input | Negative (inverting) input signal for channel B; input signals more than 0.5 V beyond the supply rails should be current-limited to 10 mA or less. |
| 7 | OUT B | output | Output of channel B; the output swings to within 15 mV of the rails with no load and is short-circuit protected to ground (one amplifier per package). |
| 8 | V+ | power_in | Positive (highest) power supply; the device operates from 4 V to 36 V total (±2 V to ±18 V) and supply voltages above 40 V can permanently damage the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 6 | 25 | μV | 5 | ||
| Input offset voltage drift | 0.03 | 0.085 | μV/°C | TA = -40°C to +105°C | 5 | ||
| Power-supply rejection ratio | PSRR | 0.075 | 0.3 | μV/V | VS = 4 V to 36 V, VCM = VS / 2 | 5 | |
| Power-supply rejection ratio | PSRR | 0.3 | μV/V | VS = 4 V to 36 V, VCM = VS / 2, TA = -40°C to +105°C | 5 | ||
| Input bias current | IB | -850 | 160 | 850 | pA | VCM = VS / 2 | 5 |
| Input bias current | IB | -18 | 18 | nA | TA = -40°C to +105°C | 5 | |
| Input offset current | IOS | -1700 | 320 | 1700 | pA | 5 | |
| Input offset current | IOS | -6 | 6 | nA | TA = -40°C to +105°C | 5 | |
| Common-mode rejection ratio | CMRR | 120 | 134 | dB | (V-) < VCM < (V+), 1.5 V | 5 | |
| Common-mode rejection ratio | CMRR | 130 | 146 | dB | (V-) + 0.5 V < VCM < (V+), 1.5 V, VS = ±18 V | 5 | |
| Common-mode rejection ratio | CMRR | 120 | 126 | dB | (V-) + 0.5 V < VCM < (V+), 1.5 V, VS = ±18 V, TA = -40°C to +105°C | 5 | |
| Open-loop voltage gain | AOL | 130 | 136 | dB | (V-) + 500 mV < VO < (V+), 500 mV, RL = 10 kΩ | 5 | |
| Open-loop voltage gain | AOL | 120 | 126 | dB | (V-) + 500 mV < VO < (V+), 500 mV, RL = 10 kΩ, TA = -40°C to +105°C | 5 | |
| Voltage output swing from rail | 6 | 15 | mV | No load | 6 | ||
| Voltage output swing from rail | 220 | 250 | mV | RL = 10 kΩ | 6 | ||
| Voltage output swing from rail | 310 | 350 | mV | RL = 10 kΩ, TA = -40°C to +105°C | 6 | ||
| Short-circuit current | ISC | -18 | 18 | mA | 6 | ||
| Capacitive load drive | CLOAD | 1 | nF | 6 | |||
| Quiescent current (per amplifier) | IQ | 415 | 510 | μA | VS = ±4 V to VS = ±18 V | 6 | |
| Quiescent current (per amplifier) | IQ | 600 | μA | IO = 0 mA, TA = -40°C to +105°C | 6 | ||
| Common-mode rejection ratio (low-voltage) | CMRR | 106 | 114 | dB | (V-) < VCM < (V+), 1.5 V | 7 | |
| Common-mode rejection ratio (low-voltage) | CMRR | 114 | 120 | dB | (V-) + 0.5 V < VCM < (V+), 1.5 V, VS = ±2 V | 7 | |
| Common-mode rejection ratio (low-voltage) | CMRR | 110 | 120 | dB | (V-) + 0.5 V < VCM < (V+), 1.5 V, VS = ±2 V, TA = -40°C to +105°C | 7 | |
| Open-loop voltage gain (low-voltage) | AOL | 110 | 120 | dB | (V-) + 500 mV < VO < (V+), 500 mV, RL = 5 kΩ, VS = 5 V | 7 | |
| Open-loop voltage gain (low-voltage) | AOL | 120 | 130 | dB | (V-) + 500 mV < VO < (V+), 500 mV, RL = 10 kΩ | 7 | |
| Open-loop voltage gain (low-voltage) | AOL | 114 | 120 | dB | (V-) + 500 mV < VO < (V+), 500 mV, RL = 10 kΩ, TA = -40°C to +105°C | 7 | |
| Quiescent current (per amplifier, low-voltage) | IQ | 385 | 485 | μA | VS = ±2 V to VS = ±4 V | 8 | |
| Quiescent current (per amplifier, low-voltage) | IQ | 590 | μA | IO = 0 mA, TA = -40°C to +105°C | 8 | ||
| Operating temperature range | TA | -40 | 125 | °C | 8 | ||
| Supply voltage (single supply) | 40 | V | single supply | 4 | |||
| Supply voltage (dual supply, ±20 V as printed) | 20 | V | 4 | ||||
| Signal input terminals current | -10 | 10 | mA | 4 | |||
| Operating free-air temperature | TA | -55 | 125 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VS | 4 | 36 | V | 4 | ||
| Specified temperature range | TA | -40 | 105 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DGK package) | RθJA | 159.3 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DGK package) | RθJC(top) | 37.4 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DGK package) | RθJB | 48.5 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
OPA2188AIDGKT - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa2188aidgkt-etched.step/opa2188aidgkt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2188aidgkt.step/opa2188aidgkt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
725088c5934f54c6, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).