Texas Instruments OPA189IDBVR precision amplifier

{
 "schema": "adom/mark-check@1",
 "step": "/home/adom/project/adom-custom-electronic-load/components/opa189idbvr/opa189idbvr-marked.step",
 "mpn": "OPA189IDBVR",
 "status": "PASS",
 "checks": [
  {
   "check": "axis",
   "status": "PASS",
   "detail": "text along the 2.75 mm axis",
   "angleDeg": 0
  },
  {
   "check": "upright",
   "status": "PASS",
   "detail": "upright, left to right, pin 1 left lower"
  },
  {
   "check": "size",
   "status": "PASS",
   "detail": "text height 0.436 mm, 99% of what fits (0.441 mm), block fills 69% of the 1.45 mm band height",
   "capMm": 0.4361,
   "fitMm": 0.4409
  },
  {
   "check": "band",
   "status": "PASS",
   "detail": "inside the usable band"
  },
  {
   "check": "flat",
   "status": "PASS",
   "detail": "flat, coplanar with the face (+5 um)"
  },
  {
   "check": "group",
   "status": "PASS",
   "detail": "Adom.LaserEtch group"
  },
  {
   "check": "colour",
   "status": "PASS",
   "detail": "light mark (sRGB 0.90, 0.90, 0.89)",
   "rgb": [
    0.896243869286,
    0.896243869286,
    0.886003966688
   ]
  },
  {
   "check": "widget",
   "status": "PASS",
   "detail": "27.9 px caps with the outline 320 px wide",
   "capHeightPx320": 27.9
  }
 ],
 "plan": {
  "summary": "Mark along the 2.75 mm axis (-Y), 0.44 mm text (2 lines), upright with pin 1 left lower, outline rot 90 after a 180 deg pose turn; ~28 px caps at 320 px",
  "band": [
   -0.725,
   -1.375,
   0.725,
   1.375
  ],
  "readingDirection": [
   -0.0,
   -1.0,
   0.0
  ],
  "lines": [
   "OPA189",
   "IDBVR"
  ]
 },
 "thresholds": {
  "sizePass": 0.8,
  "sizeFail": 0.6,
  "widgetPxPass": 6.0,
  "widgetPxFail": 4.0,
  "outlineOffsetMax": 0.15,
  "coplanarMaxMm": 0.02
 },
 "image": "components/opa189idbvr/opa189idbvr-marked.check.png",
 "reportPath": "components/opa189idbvr/opa189idbvr-marked.check.json"
}