component
OPA187IDR
Public Made by Adomby adom
Texas Instruments Precision Op Amps, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownOPA187IDR
Texas Instruments · Precision Op Amps · SOIC-8
OPA187IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection (can be left floating). |
| 2 | -IN | input | Inverting input with signal voltage range from (V-) - 0.5 V to (V+) + 0.5 V and maximum input current of ±10 mA. |
| 3 | +IN | input | Non-inverting input with signal voltage range from (V-) - 0.5 V to (V+) + 0.5 V and common-mode voltage range (V-) - 0.1 V to (V+) - 2 V. |
| 4 | V- | power_in | Negative (lowest) supply voltage; total supply voltage (V+) - (V-) must be between 4.5 V and 36 V. |
| 5 | NC | unconnected | No internal connection (can be left floating). |
| 6 | OUT | output | Output signal with rail-to-rail swing within 5 mV of the supply rails into high-impedance loads and maximum output current of ±55 mA. |
| 7 | V+ | power_in | Positive (highest) supply voltage; total supply voltage (V+) - (V-) must be between 4.5 V and 36 V. |
| 8 | NC | unconnected | No internal connection (can be left floating). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
OPA187IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
opa187idr-etched.step/opa187idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa187idr.step/opa187idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (54 pp, sha256
62bd7b5285171597, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).