component
OPA180IDBVT
Public Made by Adomby adom
Texas Instruments Pre-ordered Chips, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA180IDBVT
Texas Instruments · Pre-ordered Chips · SOT-23-5
OPA180IDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output of the amplifier. |
| 2 | V- | power_in | Negative supply or ground, used for single-supply operation. |
| 3 | +IN | input | Noninverting input. |
| 4 | -IN | input | Inverting input. |
| 5 | V+ | power_in | Positive supply or ground, used for single-supply operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 15 | 75 | μV | 10 | ||
| Input offset voltage drift | dVIO/dT | 0.1 | 0.35 | μV/°C | TA = -40°C to +125°C | 10 | |
| Power supply rejection ratio | PSRR | 0.1 | 0.5 | μV/V | VS = 4 V to 36 V, VCM = VS / 2 | 10 | |
| Power supply rejection ratio over temperature | PSRR | 0.5 | μV/V | TA = -40°C to +125°C, VS = 4 V to 36 V, VCM = VS / 2 | 10 | ||
| Input bias current | IIB | 0.25 | 1.7 | nA | OPA180, OPA4180 | 10 | |
| Input bias current over temperature | IIB | 6 | nA | OPA180, OPA4180: TA = -40°C to +125°C | 10 | ||
| Input offset current | IIO | 3.4 | nA | OPA180, OPA4180 | 10 | ||
| Input offset current over temperature | IIO | 3 | nA | OPA180, OPA4180: TA = -40°C to +125°C | 10 | ||
| Common-mode rejection ratio | CMRR | 104 | 114 | dB | (V-) < VCM < (V+), 1.5 V | 10 | |
| Common-mode rejection ratio over temperature | CMRR | 100 | 104 | dB | TA = -40°C to +125°C, (V-) + 0.5 V < VCM < (V+), 1.5 V | 10 | |
| Open-loop voltage gain | AOL | 110 | 120 | dB | (V-) + 500 mV < VO < (V+), 500 mV, RL = 10 kΩ | 10 | |
| Open-loop voltage gain over temperature | AOL | 104 | 114 | dB | TA = -40°C to +125°C, (V-) + 500 mV < VO < (V+), 500 mV, RL = 10 kΩ | 10 | |
| Voltage output swing from rail | 8 | 18 | mV | No load | 11 | ||
| Voltage output swing from rail | 250 | 300 | mV | RL = 10 kΩ | 11 | ||
| Voltage output swing from rail over temperature | 325 | 360 | mV | TA = -40°C to +125°C, RL = 10 kΩ | 11 | ||
| Short-circuit current | IOS | -18 | 18 | mA | 11 | ||
| Capacitive load drive | CLOAD | 1 | nF | 11 | |||
| Operating voltage range | VS | 2 | 18 | V | Dual supply ±2 V to ±18 V (or 4 V to 36 V single supply) | 11 | |
| Quiescent current per amplifier | IQ | 450 | 525 | μA | 11 | ||
| Quiescent current over temperature | IQ | 600 | μA | TA = -40°C to +125°C | 11 | ||
| Specified temperature range | -40 | 105 | °C | 11 | |||
| Operating temperature range (recommended) | -40 | 125 | °C | 8 | |||
| Single-supply voltage (recommended) | 4.5 | 36 | V | Single-supply | 8 | ||
| Bipolar supply voltage (recommended) | 2.25 | 18 | V | Bipolar-supply ±2.25 V to ±18 V | 8 | ||
| Supply voltage (absolute maximum, dual supply) | 20 | V | Dual supply | 8 | |||
| Supply voltage (absolute maximum, single supply) | 40 | V | Single-supply | 8 | |||
| Signal input current | -10 | 10 | mA | 8 | |||
| Operating temperature (absolute maximum) | -55 | 125 | °C | 8 | |||
| Junction temperature | TJ | 150 | °C | 8 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 8 | ||
| Junction-to-ambient thermal resistance (DBV, SOT-23) | RθJA | 158.8 | °C/W | DBV (SOT-23), 5 pins | 9 | ||
| Junction-to-case (top) thermal resistance (DBV, SOT-23) | RθJC(top) | 60.7 | °C/W | DBV (SOT-23), 5 pins | 9 | ||
| Junction-to-board thermal resistance (DBV, SOT-23) | RθJB | 44.8 | °C/W | DBV (SOT-23), 5 pins | 9 | ||
| Junction-to-top characterization parameter (DBV, SOT-23) | ψJT | 1.6 | °C/W | DBV (SOT-23), 5 pins | 9 | ||
| Junction-to-board characterization parameter (DBV, SOT-23) | ψJB | 4.2 | °C/W | DBV (SOT-23), 5 pins | 9 |
CAD (KiCad official)
- Symbol:
OPA180IDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
opa180idbvt-etched.step/opa180idbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa180idbvt.step/opa180idbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
4d974f486a130537, retrieved 2026-11-02, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).