component
OPA177M
Public Made by Adomby adom
HGSEMI Precision Op Amps, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA177M
HGSEMI · Precision Op Amps · SOP-8
OPA177M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Offset Trim | passive | Offset voltage trim terminal; an optional external potentiometer (RP = 20k) between pins 1 and 8 gives about ±3 mV adjustment range. |
| 2 | -In | input | Inverting input, protected by 500Ω series resistor and diode clamps, withstanding ±30V differential input. |
| 3 | +In | input | Non-inverting input, protected by 500Ω series resistor and diode clamps, withstanding ±30V differential input. |
| 4 | V- | power_in | Negative supply; supply voltage absolute maximum is ±22V, and the part is specified at VS = ±15V. |
| 5 | NC | unconnected | No internal connection. |
| 6 | VO | output | Op amp output with continuous short-circuit protection and a swing of ±14V typical at RL≥10kΩ. |
| 7 | V+ | power_in | Positive supply; supply voltage absolute maximum is ±22V, and 0.1µF ceramic decoupling is suggested close to the pin. |
| 8 | Offset Trim | passive | Offset voltage trim terminal; an optional external potentiometer (RP = 20k) between pins 1 and 8 gives about ±3 mV adjustment range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | 10 | 25 | µV | VS = ±15V, TA = +25°C | 2 | ||
| Offset Adjustment Range | -3 | 3 | mV | RP = 20k | 2 | ||
| Power Supply Rejection Ratio | 115 | 125 | dB | VS =±3V to±18V | 2 | ||
| Input Offset Current | 0.3 | 1.5 | nA | VS = ±15V, TA = +25°C | 2 | ||
| Input Bias Current | -2 | 0.5 | 2 | nA | VS = ±15V, TA = +25°C | 2 | |
| Input Noise Voltage | 85 | 150 | nVrms | 1Hz to 100Hz | 2 | ||
| Input Resistance Differential Mode | 26 | 45 | MΩ | Differential Mode | 2 | ||
| Common-Mode Input Range | -13 | 14 | 13 | V | 2 | ||
| Common-Mode Rejection | 130 | 140 | dB | VCM =±13V | 2 | ||
| Large Signal Voltage Gain | 5110 | 12000 | V/mV | RL≥2KΩ, VO=±10V | 2 | ||
| Output Voltage Swing | -13.5 | 14 | 13.5 | V | RL≥10kΩ | 2 | |
| Output Voltage Swing | -12.5 | 13 | 12.5 | V | RL≥2kΩ | 2 | |
| Output Voltage Swing | -12 | 12.5 | 12 | V | RL≥1kΩ | 2 | |
| Slew Rate | 0.1 | 0.3 | V/µs | RL≥2kΩ | 3 | ||
| Closed-Loop Bandwidth | 0.4 | 0.6 | MHz | G=+1 | 3 | ||
| Power Consumption | 40 | 60 | mW | VS =±15V, No Load | 3 | ||
| Power Consumption | 3.5 | 4.5 | mW | VS =±3V, No Load | 3 | ||
| Supply Current | 1.3 | 2 | mW | VS =±15V, No Load | 3 | ||
| Input Offset Voltage | 15 | 40 | µV | VS =±15V, -40°C ≤ TA ≤ +85°C | 3 | ||
| Average Input Offset Voltage Drift | 0.1 | 0.3 | µv/°C | VS =±15V, -40°C ≤ TA ≤ +85°C | 3 | ||
| Power Supply Rejection Ratio | 110 | 120 | dB | VS =±3 to ±18V, -40°C ≤ TA ≤ +85°C | 3 | ||
| Input Offset Current | 0.5 | 2.2 | nA | VS =±15V, -40°C ≤ TA ≤ +85°C | 3 | ||
| Average Input Offset Current Drift | 1.5 | 40 | Pa/°C | VS =±15V, -40°C ≤ TA ≤ +85°C | 3 | ||
| Input Bias Current | -4 | 0.5 | 4 | nA | VS =±15V, -40°C ≤ TA ≤ +85°C | 3 | |
| Average Input Bias Current Drift | 8 | 40 | Pa/°C | VS =±15V, -40°C ≤ TA ≤ +85°C | 3 | ||
| Common-Mode Input Range | -13 | 13.5 | 13 | V | VS =±15V, -40°C ≤ TA ≤ +85°C | 3 | |
| Common-Mode Rejection | 120 | 140 | dB | VCM =±13V, -40°C ≤ TA ≤ +85°C | 3 | ||
| Large Signal Voltage Gain | 2000 | 6000 | V/mV | RL≥2KΩ, VO=±10V, -40°C ≤ TA ≤ +85°C | 3 | ||
| Output Voltage Swing | -12 | 13 | 12 | V | RL≥2KΩ, -40°C ≤ TA ≤ +85°C | 3 | |
| Power Consumption | 60 | 75 | mW | VS =±15V, No Load, -40°C ≤ TA ≤ +85°C | 3 | ||
| Supply Current | 2 | 25 | mA | VS =±15V, No Load, -40°C ≤ TA ≤ +85°C | 3 | ||
| Power Supply Voltage | -22 | 22 | V | 4 | |||
| Differential Input Voltage | -30 | 30 | V | 4 | |||
| Operating Temperature | -40 | 85 | °C | Plastic DIP8, SOP8 | 4 | ||
| Storage Temperature | -65 | 125 | °C | Plastic DIP8, SOP8 | 4 | ||
| Junction Temperature | 150 | °C | 4 | ||||
| Thermal Resistance Junction-to-Ambient (SOP) | θJA | 160 | °C/W | SOP8 package | 4 | ||
| Lead Temperature (soldering, 3s) M package | 260 | °C | soldering, 3s, M package | 4 |
CAD (KiCad official)
- Symbol:
OPA177M - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
opa177m-etched.step/opa177m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa177m.step/opa177m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (12 pp, sha256
e45203799177efe2, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).