component
OPA177CM
Public Made by Adomby adom
HGSEMI Precision Op Amps, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA177CM
HGSEMI · Precision Op Amps · SOP-8
OPA177CM from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Offset Trim | passive | Offset voltage trim terminal; optional external potentiometer (RP = 20k) gives an adjustment range of about ±3mV. |
| 2 | -In | input | Inverting input, protected by 500Ω series resistor and diode clamps, withstands ±30V differential input. |
| 3 | +In | input | Non-inverting input, protected by 500Ω series resistor and diode clamps, withstands ±30V differential input. |
| 4 | V- | power_in | Negative supply; absolute maximum supply voltage is ±22V. |
| 5 | NC | unconnected | No internal connection. |
| 6 | VO | output | Op amp output with continuous short-circuit protection and ±13V typical swing into RL≥2kΩ. |
| 7 | V+ | power_in | Positive supply; absolute maximum supply voltage is ±22V. |
| 8 | Offset Trim | passive | Offset voltage trim terminal; optional external potentiometer (RP = 20k) gives an adjustment range of about ±3mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | -22 | 22 | V | 3 | |||
| Differential Input Voltage | -30 | 30 | V | 3 | |||
| Operating Temperature | -40 | 85 | °C | Plastic DIP8, SOP8 | 3 | ||
| Storage Temperature | -65 | 125 | °C | Plastic DIP8, SOP8 | 3 | ||
| Junction Temperature | 150 | °C | 3 | ||||
| Lead Temperature (Soldering, 10 seconds) | 260 | °C | Soldering, 10 seconds | 3 | |||
| Thermal Resistance Junction-to-Ambient (SOP) | θJASOP | 160 | °C/W | SOP8 package | 3 | ||
| Input Offset Voltage | 20 | 60 | µV | VS = ±15V, TA = +25°C | 4 | ||
| Power Supply Rejection Ratio | 110 | 120 | dB | VS = ±15V, TA = +25°C; VS =±3V to±18V | 4 | ||
| Input Offset Current | 0.3 | 2.8 | nA | VS = ±15V, TA = +25°C | 4 | ||
| Input Bias Current | 0.5 | 2.8 | nA | VS = ±15V, TA = +25°C | 4 | ||
| Input Noise Voltage | 85 | 150 | nVrms | VS = ±15V, TA = +25°C; 1Hz to 100Hz | 4 | ||
| Input Resistance Differential Mode | 18.5 | MΩ | VS = ±15V, TA = +25°C | 4 | |||
| Common-Mode Input Range | -13 | 14 | 13 | V | VS = ±15V, TA = +25°C | 4 | |
| Common-Mode Rejection | 115 | 140 | dB | VS = ±15V, TA = +25°C; VCM =±13V | 4 | ||
| Large Signal Voltage Gain | 200 | 6000 | V/mV | VS = ±15V, TA = +25°C; RL≥2KΩ, VO=±10V | 4 | ||
| Output Voltage Swing | -13.5 | 14 | 13.5 | V | VS = ±15V, TA = +25°C; RL≥10kΩ | 4 | |
| Output Voltage Swing | -12.5 | 13 | 12.5 | V | VS = ±15V, TA = +25°C; RL≥2kΩ | 4 | |
| Output Voltage Swing | -12 | 12.5 | 12 | V | VS = ±15V, TA = +25°C; RL≥1kΩ | 4 | |
| Slew Rate | 0.1 | 0.3 | V/µs | VS = ±15V, TA = +25°C; RL≥2kΩ | 4 | ||
| Closed-Loop Bandwidth | 0.4 | 0.6 | MHz | VS = ±15V, TA = +25°C; G=+1 | 4 | ||
| Power Consumption | 40 | 60 | mW | VS = ±15V, TA = +25°C; VS =±15V, No Load | 4 | ||
| Power Consumption | 3.5 | 4.5 | mW | VS = ±15V, TA = +25°C; VS =±3V, No Load | 4 | ||
| Supply Current | 1.3 | 2 | mW | VS = ±15V, TA = +25°C; VS =±15V, No Load | 4 | ||
| Offset Adjustment Range | -3 | 3 | mV | RP = 20k | 4 | ||
| Input Offset Voltage | 20 | 100 | µV | VS = ±15V, -40°C ≤ TA ≤ +85°C | 5 | ||
| Average Input Offset Voltage Drift | 0.7 | 1.2 | µv/°C | VS = ±15V, -40°C ≤ TA ≤ +85°C | 5 | ||
| Power Supply Rejection Ratio | 106 | 115 | dB | VS = ±15V, -40°C ≤ TA ≤ +85°C; VS =±3 to ±18V | 5 | ||
| Input Offset Current | 0.5 | 4.5 | nA | VS = ±15V, -40°C ≤ TA ≤ +85°C | 5 | ||
| Average Input Offset Current Drift | 1.5 | 85 | Pa/°C | VS = ±15V, -40°C ≤ TA ≤ +85°C | 5 | ||
| Input Bias Current | -6 | 0.5 | 6 | nA | VS = ±15V, -40°C ≤ TA ≤ +85°C | 5 | |
| Average Input Bias Current Drift | 15 | 60 | Pa/°C | VS = ±15V, -40°C ≤ TA ≤ +85°C | 5 | ||
| Common-Mode Input Range | -13 | 13.5 | 13 | V | VS = ±15V, -40°C ≤ TA ≤ +85°C | 5 | |
| Common-Mode Rejection | 110 | 140 | dB | VS = ±15V, -40°C ≤ TA ≤ +85°C; VCM =±13V | 5 | ||
| Large Signal Voltage Gain | 1000 | 4000 | V/mV | VS = ±15V, -40°C ≤ TA ≤ +85°C; RL≥2KΩ, VO=±10V | 5 | ||
| Output Voltage Swing | -12 | 13 | 12 | V | VS = ±15V, -40°C ≤ TA ≤ +85°C; RL≥2KΩ | 5 | |
| Power Consumption | 60 | 75 | mW | VS = ±15V, -40°C ≤ TA ≤ +85°C; VS =±15V, No Load | 5 | ||
| Supply Current | 2 | 25 | mA | VS = ±15V, -40°C ≤ TA ≤ +85°C; VS =±15V, No Load | 5 |
CAD (KiCad official)
- Symbol:
OPA177CM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
opa177cm-etched.step/opa177cm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa177cm.step/opa177cm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (14 pp, sha256
55f33b1528986b4a, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).