3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA171AIDR
Texas Instruments · Operational Amplifier · SO-8
OPA171AIDR from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal circuit connection; can be left floating |
| 2 | -IN | input | Inverting input; input common mode voltage range from (V-) - 0.1 V to (V+) - 2 V; input bias current ±8 pA typical |
| 3 | +IN | input | Non-inverting input; input common mode voltage range from (V-) - 0.1 V to (V+) - 2 V; input bias current ±8 pA typical |
| 4 | V- | power_in | Negative (lowest) power supply; rated voltage range 2.7 V to 36 V (or ±1.35 V to ±18 V) |
| 5 | NC | unconnected | No internal circuit connection; can be left floating |
| 6 | OUT | output | Output; voltage can swing within ±0.35 V of supply rails; maximum short circuit current +25 mA (source) / -35 mA (sink) at +25°C |
| 7 | V+ | power_in | Positive (highest) power supply; rated voltage range 2.7 V to 36 V (or ±1.35 V to ±18 V) |
| 8 | NC | unconnected | No internal circuit connection; can be left floating |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入失调电压 VOS | VOS | -1.8 | 0.25 | 1.8 | mV | TA = 25°C | 8 |
| 在温度范围内的输入失调电压 | VOS | -2 | 0.3 | 2 | mV | TA = –40°C 至 +125°C | 8 |
| 失调电压漂移 dVOS/dT | dVOS/dT | -2 | 0.3 | 2 | µV/°C | TA = –40°C 至 +125°C | 8 |
| 与电源的关系(PSRR) | -3 | 1 | 3 | µV/V | VS = 4V 至 36V; TA = –40°C 至 +125°C | 8 | |
| 输入偏置电流 IB | IB | -15 | 8 | 15 | pA | 8 | |
| 在温度范围内的输入偏置电流 | IB | -3.5 | 3.5 | nA | TA = -40°C 至 +125°C | 8 | |
| 在温度范围内的输入失调电流 | IOS | -3.5 | 3.5 | nA | TA = -40°C 至 +125°C | 8 | |
| 共模抑制比 CMRR(VS = ±2V) | CMRR | 90 | 104 | dB | VS = ±2V; (V–) – 0.1V < VCM < (V+) – 2V; TA = –40°C 至 +125°C | 8 | |
| 共模抑制比 CMRR(VS = ±18V) | CMRR | 104 | 120 | dB | VS = ±18V; (V–) – 0.1V < VCM < (V+) – 2V; TA = –40°C 至 +125°C | 8 | |
| 开环电压增益 AOL | AOL | 110 | 130 | dB | VS = 4V 至 36V; (V–) + 0.35V < VO < (V+) – 0.35V; TA = –40°C 至 +125°C | 8 | |
| 短路电流 ISC | ISC | -35 | 25 | mA | 9 | ||
| 距离电源轨的电压输出摆幅 | VO | 30 | mV | VS = 5V, RL = 10kΩ | 9 | ||
| 每个放大器的静态电流 IQ | IQ | 475 | 595 | µA | IO = 0 A | 9 | |
| 在温度范围内的每个放大器静态电流 IQ | IQ | 650 | µA | IO = 0A; TA = –40°C 至 +125°C | 9 | ||
| 额定电压范围 VS | VS | 2.7 | 36 | V | 9 | ||
| 指定的温度范围 | -40 | 125 | °C | 9 | |||
| 工作温度范围 | -55 | 150 | °C | 9 | |||
| 结至环境热阻 RθJA(D, 8 引脚 SO) | RθJA | 149.5 | °C/W | 7 | |||
| 结至外壳(顶部)热阻 RθJC(top)(D, 8 引脚 SO) | RθJC(top) | 97.9 | °C/W | 7 | |||
| 结至电路板热阻 RθJB(D, 8 引脚 SO) | RθJB | 87.7 | °C/W | 7 | |||
| 结至顶部特征参数 ψJT(D, 8 引脚 SO) | ψJT | 35.5 | °C/W | 7 | |||
| 结至电路板特征参数 ψJB(D, 8 引脚 SO) | ψJB | 89.5 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
OPA171AIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
opa171aidr-etched.step/opa171aidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa171aidr.step/opa171aidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (57 pp, sha256
3c380002bd8285da, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).