main
Ray
opa170aidbvr: specified limits as data (metadata.characteristics, 26 rows from the datasheet)
0744c06
OPA170AIDBVR
Texas Instruments · Operational Amplifier · SOT-23-5
OPA170AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. |
| 2 | V- | power_in | Negative (lowest) supply pin; device rated for single-supply 2.7V to 36V or dual-supply ±1.35V to ±18V. |
| 3 | +IN | input | Non-inverting (positive) input. |
| 4 | -IN | input | Inverting (negative) input. |
| 5 | V+ | power_in | Positive (highest) supply pin; device rated for single-supply 2.7V to 36V or dual-supply ±1.35V to ±18V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入失调电压 Input offset voltage | VOS | -1.8 | 0.25 | 1.8 | mV | TA = 25°C | 9 |
| 输入失调电压 Input offset voltage | VOS | -2 | 2 | mV | TA=-40°C 至 +125°C | 9 | |
| 输入失调电压漂移 Input offset voltage drift | dVOS/dT | -2 | 2 | µV/°C | TA = –40°C 至 +125°C | 9 | |
| 输入失调电压与电源电压间的关系 PSRR | PSRR | -5 | 1 | 5 | µV/V | VS = 4V 至 36V,TA = –40°C 至 +125°C | 9 |
| 输入偏置电流 Input bias current | IB | -15 | 15 | pA | TA = 25°C | 9 | |
| 输入偏置电流 Input bias current | IB | -3.5 | 3.5 | nA | TA=-40°C 至 +125°C | 9 | |
| 输入失调电流 Input offset current | IOS | -15 | 15 | pA | TA = 25°C | 9 | |
| 输入失调电流 Input offset current | IOS | -3.5 | 3.5 | nA | TA=-40°C 至 +125°C | 9 | |
| 共模抑制比 CMRR | CMRR | 90 | 104 | dB | VS = ±2 V,(V–) - 0.1 V < VCM < (V+) - 2 V,TA = –40°C 至 +125°C | 9 | |
| 共模抑制比 CMRR | CMRR | 104 | 120 | dB | VS = ±18V,(V–) - 0.1V < VCM < (V+) - 2V,TA = –40°C 至 +125°C | 9 | |
| 开环电压增益 Open-loop voltage gain | AOL | 110 | 130 | dB | VS = 4V 至 36V,(V–) + 0.35V < VO < (V+) - 0.35V,TA = –40°C 至 +125°C | 9 | |
| 电压输出摆幅相对于正电源轨 Output swing from positive rail | VO | 10 | mV | IL = 0mA,VS = 4V 至 36V | 10 | ||
| 拉电流 Source current output swing | IL | 115 | mV | IL 拉电流 1mA,VS = 4V 至 36V | 10 | ||
| 电压输出摆幅相对于负电源轨 Output swing from negative rail | VO | 8 | mV | IL = 0 mA,VS = 4V 至 36V | 10 | ||
| 灌电流 Sink current output swing | IL | 70 | mV | IL 灌电流 1mA,VS = 4V 至 36V | 10 | ||
| 短路电流 Short-circuit current | ISC | -20 | 17 | mA | 10 | ||
| 额定电压范围 Rated supply voltage range | VS | 2.7 | 36 | V | 10 | ||
| 每个放大器的静态电流 Quiescent current per amplifier | IQ | 110 | 145 | µA | IO = 0A;TA = 25°C | 10 | |
| 每个放大器的静态电流 Quiescent current per amplifier | IQ | 155 | µA | IO = 0A;TA = –40°C 至 +125°C | 10 | ||
| 额定温度范围 Rated temperature range | -40 | 125 | °C | 10 | |||
| 工作温度范围 Operating temperature range | -55 | 150 | °C | 10 | |||
| 结至环境热阻 Junction-to-ambient thermal resistance (DBV, 5-pin) | RθJA | 245.8 | °C/W | 8 | |||
| 结至外壳(顶部)热阻 Junction-to-case (top) thermal resistance (DBV, 5-pin) | RθJC(top) | 133.9 | °C/W | 8 | |||
| 结至电路板热阻 Junction-to-board thermal resistance (DBV, 5-pin) | RθJB | 83.6 | °C/W | 8 | |||
| 结至顶部的特征参数 Junction-to-top characterization parameter (DBV, 5-pin) | ψJT | 18.2 | °C/W | 8 | |||
| 结至电路板的特征参数 Junction-to-board characterization parameter (DBV, 5-pin) | ψJB | 83.1 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
OPA170AIDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
opa170aidbvr-etched.step/opa170aidbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa170aidbvr.step/opa170aidbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (64 pp, sha256
094354bfd136e7d0, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA170AIDBVR
**Texas Instruments** · Operational Amplifier · SOT-23-5
OPA170AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. |
| 2 | V- | power_in | Negative (lowest) supply pin; device rated for single-supply 2.7V to 36V or dual-supply ±1.35V to ±18V. |
| 3 | +IN | input | Non-inverting (positive) input. |
| 4 | -IN | input | Inverting (negative) input. |
| 5 | V+ | power_in | Positive (highest) supply pin; device rated for single-supply 2.7V to 36V or dual-supply ±1.35V to ±18V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入失调电压 Input offset voltage | VOS | -1.8 | 0.25 | 1.8 | mV | TA = 25°C | 9 |
| 输入失调电压 Input offset voltage | VOS | -2 | | 2 | mV | TA=-40°C 至 +125°C | 9 |
| 输入失调电压漂移 Input offset voltage drift | dVOS/dT | -2 | | 2 | µV/°C | TA = –40°C 至 +125°C | 9 |
| 输入失调电压与电源电压间的关系 PSRR | PSRR | -5 | 1 | 5 | µV/V | VS = 4V 至 36V,TA = –40°C 至 +125°C | 9 |
| 输入偏置电流 Input bias current | IB | -15 | | 15 | pA | TA = 25°C | 9 |
| 输入偏置电流 Input bias current | IB | -3.5 | | 3.5 | nA | TA=-40°C 至 +125°C | 9 |
| 输入失调电流 Input offset current | IOS | -15 | | 15 | pA | TA = 25°C | 9 |
| 输入失调电流 Input offset current | IOS | -3.5 | | 3.5 | nA | TA=-40°C 至 +125°C | 9 |
| 共模抑制比 CMRR | CMRR | 90 | 104 | | dB | VS = ±2 V,(V–) - 0.1 V < VCM < (V+) - 2 V,TA = –40°C 至 +125°C | 9 |
| 共模抑制比 CMRR | CMRR | 104 | 120 | | dB | VS = ±18V,(V–) - 0.1V < VCM < (V+) - 2V,TA = –40°C 至 +125°C | 9 |
| 开环电压增益 Open-loop voltage gain | AOL | 110 | 130 | | dB | VS = 4V 至 36V,(V–) + 0.35V < VO < (V+) - 0.35V,TA = –40°C 至 +125°C | 9 |
| 电压输出摆幅相对于正电源轨 Output swing from positive rail | VO | | | 10 | mV | IL = 0mA,VS = 4V 至 36V | 10 |
| 拉电流 Source current output swing | IL | | | 115 | mV | IL 拉电流 1mA,VS = 4V 至 36V | 10 |
| 电压输出摆幅相对于负电源轨 Output swing from negative rail | VO | | | 8 | mV | IL = 0 mA,VS = 4V 至 36V | 10 |
| 灌电流 Sink current output swing | IL | | | 70 | mV | IL 灌电流 1mA,VS = 4V 至 36V | 10 |
| 短路电流 Short-circuit current | ISC | -20 | 17 | | mA | | 10 |
| 额定电压范围 Rated supply voltage range | VS | 2.7 | | 36 | V | | 10 |
| 每个放大器的静态电流 Quiescent current per amplifier | IQ | | 110 | 145 | µA | IO = 0A;TA = 25°C | 10 |
| 每个放大器的静态电流 Quiescent current per amplifier | IQ | | | 155 | µA | IO = 0A;TA = –40°C 至 +125°C | 10 |
| 额定温度范围 Rated temperature range | | -40 | | 125 | °C | | 10 |
| 工作温度范围 Operating temperature range | | -55 | | 150 | °C | | 10 |
| 结至环境热阻 Junction-to-ambient thermal resistance (DBV, 5-pin) | RθJA | | 245.8 | | °C/W | | 8 |
| 结至外壳(顶部)热阻 Junction-to-case (top) thermal resistance (DBV, 5-pin) | RθJC(top) | | 133.9 | | °C/W | | 8 |
| 结至电路板热阻 Junction-to-board thermal resistance (DBV, 5-pin) | RθJB | | 83.6 | | °C/W | | 8 |
| 结至顶部的特征参数 Junction-to-top characterization parameter (DBV, 5-pin) | ψJT | | 18.2 | | °C/W | | 8 |
| 结至电路板的特征参数 Junction-to-board characterization parameter (DBV, 5-pin) | ψJB | | 83.1 | | °C/W | | 8 |
## CAD (KiCad official)
- Symbol: `OPA170AIDBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `opa170aidbvr-etched.step` / `opa170aidbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa170aidbvr.step` / `opa170aidbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/opa170) (64 pp, sha256 `094354bfd136e7d0`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa170aidbvr-datasheet.pdf)