main
Ray
Publish 0.1.0
9763f42
OPA1688IDRGR
Texas Instruments · Operational Amplifier · WSON-8-EP(3x3)
OPA1688IDRGR from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN A | input | Noninverting input for channel A; the datasheet gives an absolute maximum common-mode range of (V-) - 0.5 V to (V+) + 0.5 V and a normal input range of 100 mV below the negative rail to within 2 V of the positive rail. |
| 2 | V+ | power_in | Positive (highest) power supply; the device is specified for a supply range of 4.5 V to 36 V (±2.25 V to ±18 V). |
| 3 | V- | power_in | Negative (lowest) power supply, which is the reference for the input range and the 100 mV-below-negative-rail input limit. |
| 4 | +IN B | input | Noninverting input for channel B; the datasheet gives an absolute maximum common-mode range of (V-) - 0.5 V to (V+) + 0.5 V. |
| 5 | -IN B | input | Inverting input for channel B; the datasheet gives an absolute maximum common-mode range of (V-) - 0.5 V to (V+) + 0.5 V. |
| 6 | OUT B | output | Output of channel B, which swings rail to rail and is protected by the device's output short-circuit rating (continuous, to ground, one amplifier per package). |
| 7 | OUT A | output | Output of channel A, which swings rail to rail and is protected by the device's output short-circuit rating (continuous, to ground, one amplifier per package). |
| 8 | -IN A | input | Inverting input for channel A; the datasheet gives an absolute maximum common-mode range of (V-) - 0.5 V to (V+) + 0.5 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 4.5 | 36 | V | (V+, V-) | 4 | |
| Specified temperature | -40 | 85 | °C | 4 | |||
| Operating temperature | -55 | 125 | °C | 4 | |||
| Supply voltage | VS | 40 | V | single supply; dual supply ±20 V | 4 | ||
| Differential input voltage | -0.5 | 0.5 | V | See Section 8.4.2 | 4 | ||
| Signal input current | -10 | 10 | mA | 4 | |||
| Temperature range | -55 | 150 | °C | 4 | |||
| Junction temperature | 150 | °C | 4 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD human-body model | V(ESD) | -4000 | 4000 | V | HBM per ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD charged-device model | V(ESD) | -1000 | 1000 | V | CDM per JEDEC JESD22-C101 | 4 | |
| Input offset voltage | VOS | 0.25 | 1.5 | mV | TA = 25°C | 5 | |
| Input offset voltage over temperature | VOS | 1.6 | mV | TA = -40°C to +85°C | 5 | ||
| VOS drift over temperature | dVOS/dT | 0.5 | 2 | µV/°C | TA = -40°C to +85°C | 5 | |
| Power-supply rejection ratio | PSRR | 1 | 2.5 | µV/V | TA = -40°C to +85°C | 5 | |
| Input bias current | IB | 10 | 20 | pA | TA = 25°C | 5 | |
| Input bias current | IB | 1.5 | nA | TA = -40°C to +85°C | 5 | ||
| Input offset current | IOS | 3 | 7 | pA | TA = 25°C | 5 | |
| Input offset current | IOS | 250 | pA | TA = -40°C to +85°C | 5 | ||
| Common-mode rejection ratio | CMRR | 90 | 104 | dB | VS = ±2.25 V, (V-), 0.1 V < VCM < (V+), 2 V, TA = -40°C to +85°C | 5 | |
| Common-mode rejection ratio | CMRR | 104 | 120 | dB | VS = ±18 V, (V-), 0.1 V < VCM < (V+), 2 V, TA = -40°C to +85°C | 5 | |
| Open-loop voltage gain | AOL | 108 | 130 | dB | (V-) + 0.35 V < VO < (V+), 0.35 V, RL = 10 kΩ, TA = -40°C to +85°C | 6 | |
| Open-loop voltage gain | AOL | 118 | dB | (V-) + 0.5 V < VO < (V+), 0.5 V, RL = 2 kΩ, TA = -40°C to +85°C | 6 | ||
| Voltage output swing from rail | VO | 70 | 90 | mV | IL = ±1 mA, VS = 36 V, RL = 10 kΩ | 6 | |
| Voltage output swing from rail | VO | 330 | 400 | mV | IL = ±1 mA, VS = 36 V, RL = 2 kΩ | 6 | |
| Short-circuit current | ISC | -75 | 75 | mA | 6 | ||
| Quiescent current per amplifier | IQ | 1.6 | 1.8 | mA | IO = 0 A | 6 | |
| Quiescent current per amplifier | IQ | 2 | mA | IO = 0 A, TA = -40°C to +85°C | 6 | ||
| Gain bandwidth product | GBP | 10 | MHz | G = 1 | 5 | ||
| Slew rate | SR | 8 | V/µs | G = 1 | 5 | ||
| Full-power bandwidth | 1.3 | MHz | VO = 1 VPP | 5 | |||
| Overload recovery time | 200 | ns | VIN × gain > VS | 5 | |||
| Channel separation (dual) | -120 | dB | f = 1 kHz | 5 | |||
| Settling time | tS | 3 | µs | To 0.1%, VS = ±18 V, G = 1, 10-V step | 5 | ||
| Input voltage noise | En | 2.5 | µVPP | f = 0.1 Hz to 10 Hz | 5 | ||
| Input voltage noise density | en | 14 | nV/√Hz | f = 100 Hz | 5 | ||
| Input voltage noise density | en | 8 | nV/√Hz | f = 1 kHz | 5 | ||
| Input current noise density | in | 1.8 | fA/√Hz | f = 1 kHz | 5 | ||
| Channel separation, dc | 0.1 | µV/V | At dc | 5 | |||
| Open-loop output impedance | ZO | 60 | Ω | f = 1 MHz, IO = 0 A | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 63.2 | °C/W | DRG (WSON) package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 63.5 | °C/W | DRG (WSON) package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 36.5 | °C/W | DRG (WSON) package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 1.4 | °C/W | DRG (WSON) package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 36.6 | °C/W | DRG (WSON) package | 4 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 6.3 | °C/W | DRG (WSON) package | 4 |
CAD (KiCad official)
- Symbol:
OPA1688IDRGR - Footprint:
Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm - 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
opa1688idrgr-etched.step/opa1688idrgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa1688idrgr.step/opa1688idrgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
b4a4d89f46d8024b, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA1688IDRGR
**Texas Instruments** · Operational Amplifier · WSON-8-EP(3x3)
OPA1688IDRGR from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN A | input | Noninverting input for channel A; the datasheet gives an absolute maximum common-mode range of (V-) - 0.5 V to (V+) + 0.5 V and a normal input range of 100 mV below the negative rail to within 2 V of the positive rail. |
| 2 | V+ | power_in | Positive (highest) power supply; the device is specified for a supply range of 4.5 V to 36 V (±2.25 V to ±18 V). |
| 3 | V- | power_in | Negative (lowest) power supply, which is the reference for the input range and the 100 mV-below-negative-rail input limit. |
| 4 | +IN B | input | Noninverting input for channel B; the datasheet gives an absolute maximum common-mode range of (V-) - 0.5 V to (V+) + 0.5 V. |
| 5 | -IN B | input | Inverting input for channel B; the datasheet gives an absolute maximum common-mode range of (V-) - 0.5 V to (V+) + 0.5 V. |
| 6 | OUT B | output | Output of channel B, which swings rail to rail and is protected by the device's output short-circuit rating (continuous, to ground, one amplifier per package). |
| 7 | OUT A | output | Output of channel A, which swings rail to rail and is protected by the device's output short-circuit rating (continuous, to ground, one amplifier per package). |
| 8 | -IN A | input | Inverting input for channel A; the datasheet gives an absolute maximum common-mode range of (V-) - 0.5 V to (V+) + 0.5 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 4.5 | | 36 | V | (V+, V-) | 4 |
| Specified temperature | | -40 | | 85 | °C | | 4 |
| Operating temperature | | -55 | | 125 | °C | | 4 |
| Supply voltage | VS | | | 40 | V | single supply; dual supply ±20 V | 4 |
| Differential input voltage | | -0.5 | | 0.5 | V | See Section 8.4.2 | 4 |
| Signal input current | | -10 | | 10 | mA | | 4 |
| Temperature range | | -55 | | 150 | °C | | 4 |
| Junction temperature | | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| ESD human-body model | V(ESD) | -4000 | | 4000 | V | HBM per ANSI/ESDA/JEDEC JS-001 | 4 |
| ESD charged-device model | V(ESD) | -1000 | | 1000 | V | CDM per JEDEC JESD22-C101 | 4 |
| Input offset voltage | VOS | | 0.25 | 1.5 | mV | TA = 25°C | 5 |
| Input offset voltage over temperature | VOS | | | 1.6 | mV | TA = -40°C to +85°C | 5 |
| VOS drift over temperature | dVOS/dT | | 0.5 | 2 | µV/°C | TA = -40°C to +85°C | 5 |
| Power-supply rejection ratio | PSRR | | 1 | 2.5 | µV/V | TA = -40°C to +85°C | 5 |
| Input bias current | IB | | 10 | 20 | pA | TA = 25°C | 5 |
| Input bias current | IB | | | 1.5 | nA | TA = -40°C to +85°C | 5 |
| Input offset current | IOS | | 3 | 7 | pA | TA = 25°C | 5 |
| Input offset current | IOS | | | 250 | pA | TA = -40°C to +85°C | 5 |
| Common-mode rejection ratio | CMRR | 90 | 104 | | dB | VS = ±2.25 V, (V-), 0.1 V < VCM < (V+), 2 V, TA = -40°C to +85°C | 5 |
| Common-mode rejection ratio | CMRR | 104 | 120 | | dB | VS = ±18 V, (V-), 0.1 V < VCM < (V+), 2 V, TA = -40°C to +85°C | 5 |
| Open-loop voltage gain | AOL | 108 | 130 | | dB | (V-) + 0.35 V < VO < (V+), 0.35 V, RL = 10 kΩ, TA = -40°C to +85°C | 6 |
| Open-loop voltage gain | AOL | 118 | | | dB | (V-) + 0.5 V < VO < (V+), 0.5 V, RL = 2 kΩ, TA = -40°C to +85°C | 6 |
| Voltage output swing from rail | VO | | 70 | 90 | mV | IL = ±1 mA, VS = 36 V, RL = 10 kΩ | 6 |
| Voltage output swing from rail | VO | | 330 | 400 | mV | IL = ±1 mA, VS = 36 V, RL = 2 kΩ | 6 |
| Short-circuit current | ISC | -75 | | 75 | mA | | 6 |
| Quiescent current per amplifier | IQ | | 1.6 | 1.8 | mA | IO = 0 A | 6 |
| Quiescent current per amplifier | IQ | | | 2 | mA | IO = 0 A, TA = -40°C to +85°C | 6 |
| Gain bandwidth product | GBP | | 10 | | MHz | G = 1 | 5 |
| Slew rate | SR | | 8 | | V/µs | G = 1 | 5 |
| Full-power bandwidth | | | 1.3 | | MHz | VO = 1 VPP | 5 |
| Overload recovery time | | | 200 | | ns | VIN × gain > VS | 5 |
| Channel separation (dual) | | | -120 | | dB | f = 1 kHz | 5 |
| Settling time | tS | | 3 | | µs | To 0.1%, VS = ±18 V, G = 1, 10-V step | 5 |
| Input voltage noise | En | | 2.5 | | µVPP | f = 0.1 Hz to 10 Hz | 5 |
| Input voltage noise density | en | | 14 | | nV/√Hz | f = 100 Hz | 5 |
| Input voltage noise density | en | | 8 | | nV/√Hz | f = 1 kHz | 5 |
| Input current noise density | in | | 1.8 | | fA/√Hz | f = 1 kHz | 5 |
| Channel separation, dc | | | 0.1 | | µV/V | At dc | 5 |
| Open-loop output impedance | ZO | | 60 | | Ω | f = 1 MHz, IO = 0 A | 6 |
| Junction-to-ambient thermal resistance | RθJA | | 63.2 | | °C/W | DRG (WSON) package | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 63.5 | | °C/W | DRG (WSON) package | 4 |
| Junction-to-board thermal resistance | RθJB | | 36.5 | | °C/W | DRG (WSON) package | 4 |
| Junction-to-top characterization parameter | ψJT | | 1.4 | | °C/W | DRG (WSON) package | 4 |
| Junction-to-board characterization parameter | ψJB | | 36.6 | | °C/W | DRG (WSON) package | 4 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 6.3 | | °C/W | DRG (WSON) package | 4 |
## CAD (KiCad official)
- Symbol: `OPA1688IDRGR`
- Footprint: `Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm`
- 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files: `opa1688idrgr-etched.step` / `opa1688idrgr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa1688idrgr.step` / `opa1688idrgr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa1688.pdf) (42 pp, sha256 `b4a4d89f46d8024b`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa1688idrgr-datasheet.pdf)