3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA1671IDCKR
Texas Instruments · Audio Amplifiers · SC-70-5
OPA1671IDCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output; output voltage swing 10-20 mV from rails with RL = 10 kΩ and VS = 5.5 V, short-circuit current ±57 to ±66 mA. |
| 2 | V- | power_in | Negative (lowest) power supply; lower rail with supply voltage range 1.7 to 5.5 V relative to V+. |
| 3 | +IN | input | Noninverting input; common-mode input voltage range from (V-) to (V+), input bias current typically ±10 pA. |
| 4 | -IN | input | Inverting input; common-mode input voltage range from (V-) to (V+), input bias current typically ±10 pA. |
| 5 | V+ | power_in | Positive (highest) power supply; upper rail with supply voltage range 1.7 to 5.5 V relative to V-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VS = (V+) – (V–) | VS | 1.7 | 5.5 | V | 4 | ||
| Specified temperature, TA | TA | -40 | 125 | °C | 4 | ||
| Supply voltage, VS = (V+) – (V–) | VS | 6 | V | 4 | |||
| Input voltage | -0.3 | 0.3 | V | Min is (V–) –0.3 V; max is (V+) +0.3 V | 4 | ||
| Operating temperature, TA | TA | -55 | 150 | °C | 4 | ||
| Storage temperature, Tstg | Tstg | -65 | 150 | °C | 4 | ||
| Input offset voltage | VOS | -1.6 | 1.6 | mV | VCM = (V+) | 5 | |
| Input offset voltage | VOS | -1.25 | 0.25 | 1.25 | mV | 5 | |
| Input offset voltage | VOS | -0.25 | 0.25 | mV | TA = –40°C to 125°C | 5 | |
| Input offset voltage drift | dVOS/dT | -2.2 | 0.3 | 2.2 | μV/°C | TA = –40°C to 125°C | 5 |
| Input offset voltage versus power supply | PSRR | -130 | 30 | 130 | μV/V | VCM = (V–) | 5 |
| Input bias current | IB | -10 | 10 | pA | 5 | ||
| Input offset current | IOS | -10 | 10 | pA | 5 | ||
| Common-mode rejection ratio | CMRR | 74 | 91 | dB | VS = 1.7 V, (V–) < VCM < (V+) – 1.25 V | 5 | |
| Common-mode rejection ratio | CMRR | 80 | 96 | dB | VS = 5.5 V, (V–) < VCM < (V+) – 1.25 V | 5 | |
| Common-mode rejection ratio | CMRR | 60 | 88 | dB | VS = 1.7 V, VCM = 0 V to 1.7 V | 5 | |
| Common-mode rejection ratio | CMRR | 68 | 102 | dB | VS = 5.5 V, VCM = 0 V to 5.5 V | 5 | |
| Open-loop voltage gain | AOL | 97 | 113 | dB | (V–) + 50 mV < VO < (V+) – 50 mV, RL = 10 kΩ | 5 | |
| Open-loop voltage gain | AOL | 106 | dB | TA = –40°C to 125°C | 5 | ||
| Open-loop voltage gain | AOL | 97 | 112 | dB | (V–) + 200 mV < VO < (V+) – 200 mV, RL = 2 kΩ | 5 | |
| Open-loop voltage gain | AOL | 105 | dB | TA = –40°C to 125°C | 5 | ||
| Voltage output swing from rail | 10 | 20 | mV | VS = 5.5 V, RL = 10 kΩ | 6 | ||
| Quiescent current per amplifier | IQ | 0.94 | 1.3 | mA | IO = 0 mA | 6 | |
| Quiescent current per amplifier | IQ | 1.4 | mA | IO = 0 mA, TA = –40°C to 125°C | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 214.7 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 127.1 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 60 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ΨJT | 33.4 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ΨJB | 59.8 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
OPA1671IDCKR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
opa1671idckr-etched.step/opa1671idckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa1671idckr.step/opa1671idckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
cec326328ce8e925, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).