← Commit history
opa1637dgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+95−15
package.json+53−13@@ -51,51 +51,51 @@ "pins": [ { "number": "1",- "name": "IN\u2013",+ "name": "IN–", "type": "input",- "description": "Inverting amplifier input; input voltage must be within VVS- - 0.5 V to VVS+ + 0.5 V, differential voltage \u00b10.5 V maximum with IN+, input current \u00b110 mA maximum."+ "description": "Inverting amplifier input; input voltage must be within VVS- - 0.5 V to VVS+ + 0.5 V, differential voltage ±0.5 V maximum with IN+, input current ±10 mA maximum." }, { "number": "2", "name": "VOCM", "type": "input",- "description": "Output common-mode voltage control input; voltage range from VVS- + 1 V to VVS+ - 1 V (at \u00b12.5 V supply) or VVS- + 2 V to VVS+ - 2 V (at \u00b118 V supply)."+ "description": "Output common-mode voltage control input; voltage range from VVS- + 1 V to VVS+ - 1 V (at ±2.5 V supply) or VVS- + 2 V to VVS+ - 2 V (at ±18 V supply)." }, { "number": "3", "name": "VS+", "type": "power_in",- "description": "Positive power-supply input; supply voltage 3 V to 36 V single-supply or \u00b11.5 V to \u00b118 V dual-supply mode."+ "description": "Positive power-supply input; supply voltage 3 V to 36 V single-supply or ±1.5 V to ±18 V dual-supply mode." }, { "number": "4", "name": "OUT+", "type": "output",- "description": "Noninverting amplifier output; output voltage swing limited to within \u00b1100 mV of supply rails at \u00b12.5 V supply or \u00b1230 mV at \u00b118 V supply."+ "description": "Noninverting amplifier output; output voltage swing limited to within ±100 mV of supply rails at ±2.5 V supply or ±230 mV at ±18 V supply." }, { "number": "5",- "name": "OUT\u2013",+ "name": "OUT–", "type": "output",- "description": "Inverting amplifier output; output voltage swing limited to within \u00b1100 mV of supply rails at \u00b12.5 V supply or \u00b1230 mV at \u00b118 V supply."+ "description": "Inverting amplifier output; output voltage swing limited to within ±100 mV of supply rails at ±2.5 V supply or ±230 mV at ±18 V supply." }, { "number": "6",- "name": "VS\u2013",+ "name": "VS–", "type": "power_in",- "description": "Negative power-supply input; supply voltage \u00b11.5 V to \u00b118 V in dual-supply mode."+ "description": "Negative power-supply input; supply voltage ±1.5 V to ±18 V in dual-supply mode." }, { "number": "7", "name": "PD", "type": "input",- "description": "Power-down control input; logic low (< VVS+ - 2.0 V) enables power-down mode with 10 to 20 \u00b5A quiescent current, logic high (\u2265 VVS+ - 0.5 V) enables normal operation; leave floating if not used."+ "description": "Power-down control input; logic low (< VVS+ - 2.0 V) enables power-down mode with 10 to 20 µA quiescent current, logic high (≥ VVS+ - 0.5 V) enables normal operation; leave floating if not used." }, { "number": "8", "name": "IN+", "type": "input",- "description": "Noninverting amplifier input; input voltage must be within VVS- - 0.5 V to VVS+ + 0.5 V, differential voltage \u00b10.5 V maximum with IN-, input current \u00b110 mA maximum."+ "description": "Noninverting amplifier input; input voltage must be within VVS- - 0.5 V to VVS+ + 0.5 V, differential voltage ±0.5 V maximum with IN-, input current ±10 mA maximum." } ], "provenance": {@@ -130,6 +130,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "opa1637dgkr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2.0,+ 0.85+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "opa1637dgkr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2.0,+ 0.85+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a299c73d6050b49f7bfdab77a410460bfbd18e3f0f98810a78d7638d8508286b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -115,7 +115,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "opa1637dgkr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2.0,+ 0.85+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "opa1637dgkr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2.0,+ 0.85+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a299c73d6050b49f7bfdab77a410460bfbd18e3f0f98810a78d7638d8508286b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -162,4 +202,4 @@ "visibility": { "public": true }-}+}