3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA1611AID
Texas Instruments · Audio Amplifiers · SOIC-8
OPA1611AID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the pin can be left floating or connected to any voltage between (V-) and (V+). |
| 2 | -IN | input | Inverting input; when the input is fast-ramping in low-gain (G = +1) circuits, the input signal current must be limited to 10 mA or less. |
| 3 | +IN | input | Noninverting input; when the input is fast-ramping in low-gain (G = +1) circuits, the input signal current must be limited to 10 mA or less. |
| 4 | V- | power_in | Negative (lowest) power supply; operating supply range is ±2.25 V to ±18 V (4.5 V to 36 V total). |
| 5 | NC | unconnected | No internal connection; the pin can be left floating or connected to any voltage between (V-) and (V+). |
| 6 | OUT | output | Amplifier output; output short-circuit is continuous (one amplifier per package), with the output short-circuit current given in the electrical characteristics. |
| 7 | V+ | power_in | Positive (highest) power supply; operating supply range is ±2.25 V to ±18 V (4.5 V to 36 V total). |
| 8 | NC | unconnected | No internal connection; the pin can be left floating or connected to any voltage between (V-) and (V+). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VS | 40 | V | VS = (V+), (V-) | 4 | ||
| Input current (all pins except power-supply pins) | -10 | 10 | mA | all pins except power-supply pins | 4 | ||
| Operating temperature (TA) | TA | -55 | 125 | °C | 4 | ||
| Junction temperature (TJ) | TJ | 200 | °C | 4 | |||
| Supply voltage (recommended) | 4.5 | 36 | V | (V+, V-) | 4 | ||
| Specified temperature | -40 | 85 | °C | 4 | |||
| Input voltage noise density | en | 1.1 | 1.5 | nV/√Hz | f = 1 kHz | 5 | |
| Input offset voltage | VOS | -500 | 100 | 500 | μV | VS = ±15 V | 5 |
| VOS over temperature | dVOS/dT | 1 | 4 | μV/°C | TA = -40°C to +85°C | 5 | |
| Power-supply rejection ratio | PSRR | 0.1 | 1 | μV/V | VS = ±2.25 V to ±18 V | 5 | |
| Input bias current | IB | -250 | 60 | 250 | nA | VCM = 0 V | 5 |
| Input bias current over temperature | IB | 350 | nA | TA = -40°C to +85°C | 5 | ||
| Input offset current | IOS | -175 | 25 | 175 | nA | VCM = 0 V | 5 |
| Common-mode rejection ratio | CMRR | 110 | 120 | dB | (V-) + 2 V ≤ VCM ≤ (V+), 2 V | 5 | |
| Open-loop voltage gain | AOL | 114 | 130 | dB | (V-) + 0.2 V ≤ VO ≤ (V+), 0.2 V, RL = 10 kΩ | 6 | |
| Open-loop voltage gain | AOL | 110 | 114 | dB | (V-) + 0.6 V ≤ VO ≤ (V+), 0.6 V, RL = 2 kΩ | 6 | |
| Short-circuit current | ISC | -62 | 55 | mA | 6 | ||
| Specified voltage | VS | 2.25 | 18 | V | 6 | ||
| Quiescent current (per channel) | IQ | 3.6 | 4.5 | mA | IOUT = 0 A | 6 | |
| Quiescent current over temperature | IQ | 5.5 | mA | TA = -40°C to +85°C | 6 | ||
| Thermal resistance, SOIC-8 | θJA | 150 | °C/W | SOIC-8 | 6 |
CAD (KiCad official)
- Symbol:
OPA1611AID - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
opa1611aid-etched.step/opa1611aid-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa1611aid.step/opa1611aid.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
a7b107d9642294fa, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).