Generated by kicad-footprint-generator · KiCad file format 20260206
OPA1602AIDGKR
Texas Instruments · Audio Amplifiers · VSSOP-8
OPA1602AIDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Output of amplifier channel A with ±30 mA drive capability and (V-)+0.6 V to (V+)-0.6 V output swing at 2 kΩ load. |
| 2 | -In A | input | Inverting input of amplifier channel A with 20 kΩ differential impedance and ±10 mA maximum input current. |
| 3 | +In A | input | Non-inverting input of amplifier channel A with 20 kΩ differential impedance and ±10 mA maximum input current. |
| 4 | V- | power_in | Negative power supply terminal supporting ±2.25 V to ±18 V operation with 2.6 mA typical quiescent current per channel. |
| 5 | +In B | input | Non-inverting input of amplifier channel B with 20 kΩ differential impedance and ±10 mA maximum input current. |
| 6 | -In B | input | Inverting input of amplifier channel B with 20 kΩ differential impedance and ±10 mA maximum input current. |
| 7 | Out B | output | Output of amplifier channel B with ±30 mA drive capability and (V-)+0.6 V to (V+)-0.6 V output swing at 2 kΩ load. |
| 8 | V+ | power_in | Positive power supply terminal supporting ±2.25 V to ±18 V operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -1 | 0.1 | 1 | mV | VS = ±15V | 3 |
| Input Bias Current | IB | -200 | 20 | 200 | nA | VCM = 0V | 3 |
| Input Offset Current | IOS | -200 | 20 | 200 | nA | VCM = 0V | 3 |
| Power Supply Rejection Ratio | PSRR | 0.5 | 2 | μV/V | VS = ±2.25V to ±18V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 114 | 120 | dB | (V–) + 2V ≤ VCM ≤ (V+) – 2V, VS ≥ ±5V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 100 | 110 | dB | (V–) + 2V ≤ VCM ≤ (V+) – 2V, VS < ±5V | 3 | |
| Open-Loop Voltage Gain | AOL | 114 | 120 | dB | (V–) + 0.6V ≤ VO ≤ (V+) – 0.6V, RL = 2kΩ, VS ≥ ±5V | 3 | |
| Open-Loop Voltage Gain | AOL | 106 | 114 | dB | (V–) + 0.6V ≤ VO ≤ (V+) – 0.6V, RL = 2kΩ, VS < ±5V | 3 | |
| Short-Circuit Current | ISC | -60 | 70 | mA | One channel at a time | 3 | |
| Specified Voltage | VS | 2.25 | 18 | V | 4 | ||
| Quiescent Current, Dual, per channel | IQ | 2.6 | 3.2 | mA | IOUT = 0A | 4 | |
| Specified Temperature Range | -40 | 85 | °C | 4 | |||
| Operating Temperature Range | -55 | 125 | °C | 4 | |||
| Supply Voltage | VS | 40 | V | VS = (V+) – (V–) | 2 | ||
| Input Current (all pins except power-supply pins) | -10 | 10 | mA | All pins except power-supply pins | 2 | ||
| Operating Temperature | -55 | 125 | °C | Over operating free-air temperature range | 2 | ||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Junction Temperature | 200 | °C | 2 | ||||
| ESD Human Body Model (HBM) | 4 | kV | 2 | ||||
| ESD Charged Device Model (CDM) | 1 | kV | 2 | ||||
| ESD Machine Model (MM) | 200 | V | 2 | ||||
| Junction-to-ambient thermal resistance (DGK, 8 pins) | θJA | 154.7 | °C/W | DGK package, 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance (DGK) | θJCtop | 49.7 | °C/W | DGK package, 8 pins | 4 | ||
| Junction-to-board thermal resistance (DGK) | θJB | 107.9 | °C/W | DGK package, 8 pins | 4 | ||
| Junction-to-top characterization parameter (DGK) | ψJT | 2.5 | °C/W | DGK package, 8 pins | 4 | ||
| Junction-to-board characterization parameter (DGK) | ψJB | 106.7 | °C/W | DGK package, 8 pins | 4 |
CAD (KiCad official)
- Symbol:
OPA1602AIDGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
opa1602aidgkr-etched.step/opa1602aidgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa1602aidgkr.step/opa1602aidgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
625e6099d79836c6, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).