OP284FSZ

{
  "slug": "op284fsz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Operational Amplifier, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "op284fsz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "op284fsz.kicad_sym",
    "op284fsz.kicad_mod",
    "op284fsz.glb",
    "op284fsz.step",
    "op284fsz.lbr",
    "docs/hero.png",
    "docs/op284fsz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "op284fsz-hero.glb",
    "op284fsz-hero.overlay.json",
    "op284fsz-etched.glb"
  ],
  "component": {
    "mpn": "OP284FSZ",
    "manufacturer": "Analog Devices",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Operational Amplifier",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590145894600912896",
    "parts": {
      "symbol": "op284fsz.kicad_sym",
      "footprint": "op284fsz.kicad_mod",
      "model_3d": "op284fsz-hero.glb",
      "model_3d_plain": "op284fsz-etched.glb",
      "model_3d_step": "op284fsz-etched.step",
      "model_3d_step_plain": "op284fsz.step",
      "lbr": "op284fsz.lbr"
    },
    "distributor_links": {
      "lcsc": "C581247",
      "digikey": "505-OP284FSZ-ND",
      "mouser": "584-OP284FSZ"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T01:02:19Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-OP284FSZ-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "584-OP284FSZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT A",
        "type": "output",
        "description": "Output of amplifier A, a rail-to-rail stage that saturates about 20 mV above V- and 100 mV below V+, with a typical short-circuit current limit of about 20 mA."
      },
      {
        "number": "2",
        "name": "-IN A",
        "type": "input",
        "description": "Inverting input of amplifier A; the differential input is limited to ±0.6 V, and input current should be kept below 5 mA by a series resistor if overdrive is expected."
      },
      {
        "number": "3",
        "name": "+IN A",
        "type": "input",
        "description": "Non-inverting input of amplifier A, with an input voltage range that spans the full supply rails (0 V to 5 V at 5 V supply) and is protected only by external limiting above the rails."
      },
      {
        "number": "4",
        "name": "V-",
        "type": "power_in",
        "description": "Negative supply rail; in single-supply operation this pin is tied to GND, and the device operates from 3 V to 36 V total supply."
      },
      {
        "number": "5",
        "name": "+IN B",
        "type": "input",
        "description": "Non-inverting input of amplifier B, with the same rail-to-rail input range and the same overdrive limits as the other inputs."
      },
      {
        "number": "6",
        "name": "-IN B",
        "type": "input",
        "description": "Inverting input of amplifier B, with a differential input limit of ±0.6 V and an input current limit of 5 mA under overdrive."
      },
      {
        "number": "7",
        "name": "OUT B",
        "type": "output",
        "description": "Output of amplifier B, a rail-to-rail stage with the same saturation limits (about 20 mV from V- and 100 mV from V+) and typical short-circuit current of about 20 mA."
      },
      {
        "number": "8",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply rail; the datasheet guarantees operation from 3 V to 36 V (or ±1.5 V to ±18 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The extracted text for Figure 2 (8-pin PDIP/SOIC top view) lists the pin names but does not preserve; The datasheet states that OP284 has no internal input current limiting and that input current exceed; The datasheet describes the OP184 SOIC pinout (with DNC and NC pins) on the same page. Those pins do"
        ],
        "pages_sent": 24,
        "cost_usd": 0.1268,
        "at": "2026-10-21T00:59:59"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590145894600912896",
        "pages": 24,
        "sha256": "ca10eae4fe8d85e6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "op284fsz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "op284fsz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1a2d8d26b03eb05a4f204525ea5c69f0fff017ee795bcd44ae248f6857b4e945",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}