component

OP284FSZ

Public Made by Adom

by adom

Analog Devices Operational Amplifier, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiers-comparatorsop284fszfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
op284fsz / README.md
History Download
Ray Publish 0.1.0 57d81e5 7d ago

OP284FSZ

Analog Devices · Operational Amplifier · SOIC-8

OP284FSZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of amplifier A, a rail-to-rail stage that saturates about 20 mV above V- and 100 mV below V+, with a typical short-circuit current limit of about 20 mA.
2 -IN A input Inverting input of amplifier A; the differential input is limited to ±0.6 V, and input current should be kept below 5 mA by a series resistor if overdrive is expected.
3 +IN A input Non-inverting input of amplifier A, with an input voltage range that spans the full supply rails (0 V to 5 V at 5 V supply) and is protected only by external limiting above the rails.
4 V- power_in Negative supply rail; in single-supply operation this pin is tied to GND, and the device operates from 3 V to 36 V total supply.
5 +IN B input Non-inverting input of amplifier B, with the same rail-to-rail input range and the same overdrive limits as the other inputs.
6 -IN B input Inverting input of amplifier B, with a differential input limit of ±0.6 V and an input current limit of 5 mA under overdrive.
7 OUT B output Output of amplifier B, a rail-to-rail stage with the same saturation limits (about 20 mV from V- and 100 mV from V+) and typical short-circuit current of about 20 mA.
8 V+ power_in Positive supply rail; the datasheet guarantees operation from 3 V to 36 V (or ±1.5 V to ±18 V).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage, OP284 F grade (25°C) VOS 125 µV VS = 5.0 V, VCM = 2.5 V, TA = 25°C (5 V table note); F grade 3
Input offset voltage, OP284 F grade (over temperature) VOS 350 µV VS = 5.0 V, VCM = 2.5 V, −40°C ≤ TA ≤ +125°C; F grade 3
Input bias current IB 60 450 nA VS = 5.0 V, VCM = 2.5 V, TA = 25°C 3
Input bias current (over temperature) IB 600 nA VS = 5.0 V, VCM = 2.5 V, −40°C ≤ TA ≤ +125°C 3
Input offset current IOS 2 50 nA VS = 5.0 V, VCM = 2.5 V, TA = 25°C 3
Input offset current (over temperature) IOS 50 nA VS = 5.0 V, VCM = 2.5 V, −40°C ≤ TA ≤ +125°C 3
Input voltage range 0 5 V VS = 5.0 V 3
Common-mode rejection ratio CMRR 60 dB VCM = 0 V to 5 V 3
Common-mode rejection ratio (over temperature) CMRR 86 dB VCM = 1.0 V to 4.0 V, −40°C ≤ TA ≤ +125°C 3
Large-signal voltage gain AVO 50 240 V/mV RL = 2 kΩ, 1 V ≤ VO ≤ 4 V 3
Large-signal voltage gain (over temperature) AVO 25 V/mV RL = 2 kΩ, −40°C ≤ TA ≤ +125°C 3
High output voltage VOH 4.8 V IL = 1.0 mA 3
Low output voltage VOL 125 mV IL = 1.0 mA 3
Output current IOUT -6.5 6.5 mA 3
Power supply rejection ratio PSRR 76 dB VS = 2.0 V to 10 V, −40°C ≤ TA ≤ +125°C 3
Supply current per amplifier ISY 1.45 mA VO = 2.5 V, −40°C ≤ TA ≤ +125°C 3
Supply voltage range VS 3 36 V 3
Slew rate SR 1.65 2.4 V/µs RL = 2 kΩ 3
Input offset voltage, OP284 F grade (25°C) VOS 125 µV VS = 3.0 V, VCM = 1.5 V, TA = 25°C (3 V table note); F grade 4
Input offset voltage, OP284 F grade (over temperature) VOS 350 µV VS = 3.0 V, VCM = 1.5 V, −40°C ≤ TA ≤ +125°C; F grade 4
Input bias current IB 60 450 nA VS = 3.0 V, VCM = 1.5 V, TA = 25°C 4
Input bias current (over temperature) IB 600 nA VS = 3.0 V, VCM = 1.5 V, −40°C ≤ TA ≤ +125°C 4
Input offset current (over temperature) IOS 50 nA VS = 3.0 V, VCM = 1.5 V, −40°C ≤ TA ≤ +125°C 4
Input voltage range 0 3 V VS = 3.0 V 4
Common-mode rejection ratio CMRR 60 dB VCM = 0 V to 3 V 4
Common-mode rejection ratio (over temperature) CMRR 56 dB VCM = 0 V to 3 V, −40°C ≤ TA ≤ +125°C 4
High output voltage VOH 2.8 V IL = 1.0 mA 4
Low output voltage VOL 125 mV IL = 1.0 mA 4
Power supply rejection ratio PSRR 76 dB VS = ±1.25 V to ±1.75 V 4
Supply current per amplifier (over temperature) ISY 1.35 mA VO = 1.5 V, −40°C ≤ TA ≤ +125°C 4
Input offset voltage, OP284 F grade (25°C) VOS 175 µV VS = ±15.0 V, VCM = 0 V, TA = 25°C (±15 V table note); F grade 5
Input offset voltage, OP284 F grade (over temperature) VOS 375 µV VS = ±15.0 V, VCM = 0 V, −40°C ≤ TA ≤ +125°C; F grade 5
Input bias current IB 80 450 nA VS = ±15.0 V, VCM = 0 V, TA = 25°C 5
Input bias current (over temperature) IB 575 nA VS = ±15.0 V, VCM = 0 V, −40°C ≤ TA ≤ +125°C 5
Input offset current (over temperature) IOS 50 nA VS = ±15.0 V, VCM = 0 V, −40°C ≤ TA ≤ +125°C 5
Input voltage range -15 15 V VS = ±15.0 V 5
Common-mode rejection ratio (over temperature) CMRR 86 90 dB VCM = −14.0 V to +14.0 V, −40°C ≤ TA ≤ +125°C 5
Common-mode rejection ratio CMRR 80 dB VCM = −15.0 V to 15.0 V 5
Large-signal voltage gain AVO 150 1000 V/mV RL = 2 kΩ, −10 V ≤ VO ≤ 10 V 5
Large-signal voltage gain (over temperature) AVO 75 V/mV RL = 2 kΩ, −40°C ≤ TA ≤ +125°C 5
High output voltage VOH 14.8 V IL = 1.0 mA 5
Low output voltage VOL -14.875 V IL = 1.0 mA 5
Output current IOUT -10 10 mA 5
Power supply rejection ratio PSRR 90 dB VS = ±2.0 V to ±18 V, −40°C ≤ TA ≤ +125°C 5
Supply current per amplifier (over temperature) ISY 2 mA VO = 0 V, −40°C ≤ TA ≤ +125°C 5
Supply current per amplifier (over temperature) ISY 2.25 mA VS = ±18 V, −40°C ≤ TA ≤ +125°C 5
Slew rate SR 2.4 4 V/µs RL = 2 kΩ 5
Supply voltage (absolute maximum) -18 18 V Printed as ±18 V 6
Input voltage (absolute maximum) -18 18 V Printed as ±18 V 6
Differential input voltage (absolute maximum) -0.6 0.6 V Printed as ±0.6 V; for inputs beyond 0.6 V, input current must be below 5 mA 6
Storage temperature range -65 150 °C P and S suffix packages 6
Operating temperature range -40 125 °C OP184/OP284/OP484E/OP484F 6
Junction temperature range -65 150 °C P and S suffix packages 6
Lead temperature (soldering, 60 s) 300 °C Soldering, 60 seconds 6
Thermal resistance, junction-to-ambient (8-lead SOIC, S suffix) θJA 158 °C/W Worst case, device soldered to circuit board 6
Thermal resistance, junction-to-case (8-lead SOIC, S suffix) θJC 43 °C/W 8-lead SOIC (S suffix) 6

CAD (KiCad official)

  • Symbol: OP284FSZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: op284fsz-etched.step / op284fsz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); op284fsz.step / op284fsz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 ca10eae4fe8d85e6, retrieved 2026-10-21, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF